
Valeo unveils its aluminium Rear Door Cooling Module (RDHx) offering a 38 per cent boost in cooling capacity and a 65 per cent increase in power density compared to conventional copper equivalents. Valeo also exhibits its full range of liquid cooling solutions including Direct-to-Chip (DtC) Cold Plates, Cooling Distribution Units (CDUs) in rack manifolds and loop heat pipe innovations. At Data Centre World (Tech Show Paris) from November 18 to 19, 2026, visitors at Booth M100 (Hall 5, Paris Expo Porte de Versailles) will get their first hands-on look at Valeo’s new aluminium Rear Door Cooling Module, showcased alongside a complete lineup of thermal management solutions. As artificial intelligence (AI) workloads and high-performance computing (HPC) are pushing individual chip TDP (Thermal...
Guinea and Ghana are approaching the global bauxite market from very different positions. While Guinea has established itself as the powerhouse of international bauxite supply, its growing export volumes are creating a new challenge of maintaining prices and protecting the economic returns from its mineral wealth. Ghana, meanwhile, is looking beyond raw ore exports, pursuing foreign investment, domestic alumina refining and stronger integration across its aluminium industry. The contrast is becoming increasingly momentous, with Guinea considering production controls and a national bauxite pricing mechanism to strengthen its influence over the market. Au contraire, Ghana is attracting international companies, including Russia’s RUSAL, to develop its largely untapped deposits and establish...
Grow with
AL Circle

ALUMINIUM processor Hulamin on Monday reported a 32% decline in headline earnings per share (HEPS) to 21c in the half-year ended June 30 2013 compared with restated 2012 results. The restatement is required by the new accounting standard IAS 19R, which became effective in the current period and which Hulamin has applied for the first time. Although the revised standard had little impact in the current period, it has had a substantial effect on the restatement of the corresponding prior period. HEPS would have been up 17% compared with the previously reported 2012 results. This material difference arose from the conversion of the Hulamin pension fund from defined benefit to defined contribution in 2012. Turnover increased by 13.1% to R3.6bn on higher sales volumes and a weaker rand,...

MRT Castings has commissioned a new advanced die casting cell further enhancing the already high quality of its die casting facilities. MRT Castings has commissioned a new advanced die casting cell - further enhancing the already high quality of its die casting facilities. MRT is renowned for its aluminium and zinc gravity and high pressure die casting. This new investment is testament to its commitment to quality, precision and productivity. The Colosio PFO 250 die casting cell was precision built in Brescia, Northern Italy. Its innovative features include: Real-time shot control - by monitoring and storing process data, the advanced control system of the Colosio die casting machine affords MRT accurate repetition of all the injection parameters, pressures, speeds and strokes to ensure...

Bauxite Resources Limited Chairman Barry Carbon AM announces that he will retire from all positions with the Company effective 9 August 2013. The Board and Management of Bauxite Resources wish to express its sincere thanks to Mr Carbon for his significant contribution to the Company during his nearly four years as Chairman and wish him best in his retirement. Following Mr Carbon's retirement, Mr Robert Nash will become Chairman on an interim basis until further notice.

Ghana could lose over $350 billion of revenue from the bauxite industry if measures are not put in place to establish a refinery and integrate the various players in the precious minerals’ value chain. This is according to the Volta Aluminum Company (VALCO). A conservative estimate of Ghana’s bauxite is reported to be about 700 million tons. VALCO which currently exports most of its output is calling for the establishment of a bauxite refinery in Ghana which will form a part of the Aluminum integration project. Deputy CEO of VALCO, Daniel Acheampong speaking on the Citi Breakfast show said, establishing the refinery is our best bet to sustaining the industry. “Ghana has bauxite resources at Kibi and Nyinahin that if mined and exported, will fetch Ghana about $17.5 billion, but currently...

Anil Agarwal’s Vedanta Alumina, a unit of the London-listed Vedanta Resources, might ask the Odisha state government for a alternative mining site after its proposed mining project in the Niyamgiri hills range suffered a fresh setback today. The seventh village, of the total 12, today rejected the mining proposal through a Gram Sabha hearing. Five more villages are still to hold Gram Sabhas but with the majority verdict in, the billionaire might now find it difficult to go ahead with the original plan. Under Supreme Court’s direction the state government is conducting Gram Sabha meetings in 12 villages of two districts – Kalahandi and Rayagada. The objective is to understand the opinion of natives on a proposed mining project that the London-listed company wants to do along with the...

The FOB price of West Australian alumina fell to USD 316.5/mt last week, down USD 2.5/mt on a weekly basis and the lowest level since last September. The price decline was due largely to falling LME aluminum prices and sagging demand from China. First, LME three-month aluminum contract prices fell to USD 1,850/mt in July, close to levels seen in September 2012. Second, China’s Australian alumina imports fell in June and H1. China imported only 1.63 million mt of Australian alumina in H1, 2013, down 24% YoY. Slackening demand from China weighted Australian alumina prices down. Depressed LME aluminum prices and weak demand from China will undermine any potential towards an immediate rally in Australian alumina prices.

The Aluminum Association has hired Joe Quinn as its new vice president of public affairs, effective July 15. Quinn’s responsibilities will include overseeing the association’s policy communications, advocacy strategies and media relations. Prior to joining the Aluminum Association, Quinn served as vice president of the public relations firm Edelman, where he led public affairs and corporate reputation programs for Walmart, Toyota and the American Petroleum Institute, among others. "Joe has a breadth of knowledge in communications and strategic public affairs, as well as experience inside Washington, and I’m glad to have him on board at the association," says Pat Franc, the Aluminum Association’s chairman and president of Tri-Arrows Aluminum. "I’m pleased that a committee of member...

The Gesamtverband der Aluminiumindustrie (GDA) in Düsseldorf, Germany announces the International Aluminium Pressure Die Casting Competition 2014. Partners in organising the competition are the Federation of the German Foundry Industry (BDI) and the European Aluminium Association (EAA). Submissions to the competition can be made until 31 October 2013. For years the aluminium pressure die casting competition has been a proven platform for showing off the high standard of quality in aluminium pressure die casting. The goal of the competition is to strengthen interest in aluminium as versatile working material, and to demonstrate new areas of application. Until now the aluminium pressure die casting competition was held by the Association of the Aluminium Recycling Industry (VAR), which...

The aluminum company Novelis, headquartered in Atlanta, has announced plans to increase the price for all of its automotive aluminum sheet products in Europe y 160 Euros (US$209.45) per ton. The company notes that the price change is effective immediately for all new orders not covered by current supply agreements. “The price increase announced reflects the strong demand for our automotive sheet products, which has resulted in a prevailing tight supply situation," says Roland Harings, vice president of Global Automotive for Novelis Inc. "Automobile manufacturers are increasingly turning to aluminum as the material of choice to reduce vehicle mass and help meet new targets in performance, fuel efficiency and reduced emissions. In response to this demand, we are expanding our capacity to...

Aluminum recycling has become a successful business since its inception a century ago. Nearly a third of the aluminum produced in the United States is made from aluminum scraps that have been recycled in a process—usually remelting—that uses only 5 to 10 percent of the energy it takes to extract aluminum from mined bauxite ore. But there are limitations to the remelting of aluminum, says Wojciech Misiolek, the director of Lehigh's Institute for Metal Forming and the Loewy Chair in Materials Forming and Processing. Significant metal losses can occur when aluminum is remelted. Machine chips and other fine pieces of scrap are difficult to remelt. Contamination and impurities can cause the mechanical properties of recycled aluminum, especially its strength and ductility, to be inferior to...

Noranda Aluminum Holding Corp. declared a quarterly dividend on Wednesday, July 24th, Stock Ratings Network reports. Investors of record on Monday, August 5th will be given a dividend of $0.04 per share on Wednesday, August 28th. This represents a $0.16 dividend on an annualized basis and a yield of 4.97%. Several analysts have recently commented on the stock. Analysts at UBS AG downgraded shares of Noranda Aluminum Holding Corp. from a “buy” rating to a “neutral” rating in a research note to investors on Thursday. They now have a $3.50 price target on the stock, down previously from $4.25. On the ratings front, analysts at Zacks downgraded shares of Noranda Aluminum Holding Corp. from a “neutral” rating to an “underperform” rating in a research note to investors on Friday, July 19th....

Following the smooth and efficient commissioning of two new CVC plus six-high cold rolling mills, Chinese aluminum producer Luoyang Wanji Processing Company issued the Final Acceptance Certificate (FAC) for both mills to SMS Siemag, Germany. On cold rolling mill No. 1, the first strip had already been rolled in 2012. The FAC was granted before the end of the year, marking the successful completion of the hot commissioning phase, with the rolling mill becoming an integral part of production operations. This success was repeated on March 30, 2013, when also for cold rolling mill No. 2 the FAC was granted. Luoyang Wanji’s new production facilities in the province of Henan in East China now boast installed production capacities totaling 260,000 tons per year. The commissioning of these plants...

The German aluminum producer Trimet has agreed to acquire two of Rio Tinto’s aluminum plants in France. The plants had become high-cost producers, and Rio Tinto had been seeking to sell the facilities as a way to reduce its overall costs. The two facilities are located in Saint-Jean-de-Maurienne and Castelsarrasin. For Trimet, the acquisitions allows the company to extend its portfolio of specialized light metal products. The deal with Rio Tinto is conditional upon the approval of the regulatory authorities and the execution of an energy supply agreement and a partnership arrangement with Electricite de France (EDF). The production plants were set up by the French aluminum manufacturer Pechiney, which had been taken over by Rio Tinto Alcan. The aluminum plants produce aluminum wire rod...

The premium aluminum buyers are expected to pay for supplies in the U.S. fell for a second week as lawmakers stepped up scrutiny of bank involvement in warehousing, according to Harbor Intelligence. The premium slipped to 11.5 cents to 12 cents a pound this week, from 11.8 cents to 12 cents a pound last week, Jorge Vazquez, managing director of the Austin, Texas-based researcher, said in a report. The fee, which is added to the price of metal for immediate delivery, reached a record 12 cents to 13 cents in June. A Senate panel held a hearing this week to examine banks’ ownership of warehouses and other commodity assets after consumers complained of long waits and rising costs. The inquiry came three weeks after the London Metal Exchange proposed measures to help unclog growing queues at...

Shipments of rolled-aluminum products by Japanese fabricators to domestic and overseas markets decreased 8.6 percent in June, the eighth month of decline, an industry group said today. Volume declined to 161,854 metric tons last month from 177,050 tons a year earlier, the Japan Aluminium Association said in a report.

Alcoa Inc., the largest U.S. aluminum producer, is urging the London Metal Exchange to provide more transparency into its marketplace for the lightweight metal. The current system isn’t sustainable, Klaus Kleinfeld, Alcoa’s chairman and chief executive officer, said in an interview. At stake, he said, is the London exchange’s relevance as the price-setter to producers and users of aluminum, the metal used in products from beer cans to aircraft. “The outcome of price determination that is not transparent is eventual lack of trust,” Kleinfeld said by phone yesterday. “People will look for alternatives.” Alcoa joins United Co. Rusal, the world’s largest aluminum producer, and Norsk Hydro ASA (NHY), Europe’s third-largest producer, in calling on the LME to reveal more about who holds metal...

Aluminium futures today fell by 0.57% to Rs 104.90 per kg, largely in tandem with a weakening trend in base metals overseas and subdued demand at domestic markets. At the Multi Commodity Exchange, aluminium prices for delivery in July traded 60 paise, or 0.57%, lower at Rs 104.90 per kg in a business turnover of 205 lots. The metal prices for delivery in August traded 50 paise, or 0.47% down at Rs 106.85 per kg in two lots. Market analysts said apart from subdued spot demand, weakness in base metals in the global market after China's manufacturing weakened further in July, mainly led to a fall in aluminium prices at futures trade.

China has ordered metal smelters to close outdated capacity by the end of September and dismantle it by the end of this year, the Ministry of Industry and Information Technology said in a statement on Thursday. The top global producer and consumer of metals has set yearly plans to close outdated capacity since 2009 as part of efforts to cut energy consumption and emissions. This year, the closing deadline is earlier, compared with the year-end in previous years. The ministry ordered the closure of 654,400 tonnes of outdated copper capacity by the end of September, the statement said. A total of 260,000 tonnes of outdated aluminium capacity is also required to be closed, the ministry said on its website(www.miit.gov.cn). The ministry ordered 807,000 tonnes of lead capacity and 146,200...