
Vishay Intertechnology has added 550 V and 600 V options to its 259 PHM-SI series of snap-in aluminium electrolytic capacitors. The new models are intended for high-voltage applications in industrial equipment, energy systems and medical devices. The higher voltage ratings allow engineers to use fewer capacitors in DC bus systems operating between 800 V and 1,100 V. Earlier designs typically required three capacitors rated at 400 V to 450 V, connected in series with voltage-balancing resistors. The new 550 V and 600 V models can reduce the number of components and the need for balancing circuits, while also saving circuit board space and lowering costs. Explore further insights and forecasts for the aluminium flat rolled products (FRP) market from our comprehensive report - Aluminium Flat...
Aluminium Dolomites, a sister company of Aluminium Bozen, will take over Hydro ’s remelt facility in Feltre, Italy. The deal will keep the facility running and see 35 employees move to the new owner. In November 2025, Hydro announced plans to shut its Feltre remelt and extrusion operations as part of a wider restructuring of its European extrusion business. It later put the remelt facility up for sale, seeking a buyer that could maintain operations and provide an alternative for its employees and the surrounding community. To know the global production, demand and consumption forecasts of aluminium extrusions, explore our report " The World of Aluminium Extrusions to 2035 " The transaction covers the aluminium remelt assets, the site, buildings and infrastructure. However, Feltre's...
Grow with
AL Circle

Where government controls and environmental pressures have failed, good old market economics may finally be picking up sway. Of course, it isn’t quite that simple. Some of the credit must go to federal pressure on state governments to reign in subsidies and support, but it would seem if a Reuters article is correct that the closure of some 2 million tons of capacity this year, coupled with still-rising demand, is finally closing the excess capacity gap. An analyst quoted by Reuters forecasts a surplus of less than 500,000 metric tons, said to be half the 1 million tons touted by analysts and smelters earlier in 2014. Smelters closed about 2 million tons of high-cost capacity between late 2013 and May 2014 as prices dropped to five-year lows. Although, worryingly, around 200,000-500,000...

The expected Chinese aluminum surplus in 2014 is likely to get reduced, according to most recent analysis. The robust demand from transport sector and the closure of more facilities may reduce the aluminum surplus from earlier projected 1 million tonnes to less than 500,000 tonnes. According to sources, almost 2 million tonnes of high-cost smelter facilities were idled in the country between end-2013 and May this year. This followed the sharp fall in aluminum prices . The prices had touched a 5-year low during March this year. However, almost 500,000 tonnes of idled smelters returned to operation following the recovery in prices. The aluminum prices have already recovered nearly 15% from the March lows. The country’s primary aluminum output grew 7.9% during the first five months of the...

Average operating rate of Chinese A356 aluminum alloy producers rose to 67.50% in June, Shanghai Metals Market survey showed. The 1.25% month-on-month uptick in operating rate allowed output at the surveyed producers to grow 2,000 tonnes on the month to 108,000 tonnes in June, SMM survey showed. Besides, processing fees for A356 aluminum alloy in China also gained 50 to 700 yuan ($ 113) per tonne, spurred by growing demand at home and abroad. Aluminum alloy producers are unlikely to cut output in July, SMM foresees, though aluminum wheel rim production will slow in July and August due to high temperatures and slack demand in summer months. This will exert downward pressure on processing fees for A356 aluminum alloy.

Aluminium producer Alcoa last night reported a jump in earnings on strong metals pricing and lower costs as it confirmed its outlook for 7% aluminium demand growth in 2014. Alcoa, the first major US company to report second-quarter earnings, said net income for the period ending June 30 was $138m, up from a loss of $119m the same time last year. Revenues were $5.84 billion, down slightly from $5.85 billion. Total costs fell from $5.98 billion a year ago to $5.63 billion. "Our second quarter results prove Alcoa's transformation is in high gear," said Alcoa's chief executive Klaus Kleinfeld. Kleinfeld pointed to moves to close low-return smelters and steer investment to "value-added" segments, such as light-weight aluminium for car and aviation makers concerned about fuel efficiency. The...

Summer sees many people snapping open a can for a long cool drink. That seasonal thirst causes many non-redeemable aluminum cans – many of them from Estonia -- to end up in mixed waste bins. Mixed waste from the capital region most often ends up in Vantaa’s new waste treatment facility – and that’s where it causes problems. “In practice aluminum melts in our furnace and can jam the machine. It also blocks the ash conveyors and this creates extra costs for us,” said Kalle Patomeri, Vantaa Energy project director. When the power plant was still in its testing phase, power plant officials noticed that many cans were ending up in the waste disposal facility. As a result they encouraged consumers to redouble their recycling efforts. “As a recyclable aluminum is a very valuable material so we...

The European Aluminium Association (EAA) has welcomed the European Commission's efforts to strengthen the EU’s waste policy framework as an important step forward in its transition to a circular economy. In this same context, the body is also calling for achievable recycling targets and accurate definitions. 'EAA welcomes the European Commission's package and supports many of its flagship proposals, including the new requirements on waste exports to combat illegal shipments of waste, the gradual phasing-out of landfilling of recyclable waste, the reference to recyclability and durability in eco-design requirements, and the call for a better reporting of data,' says its director general Gerd Götz. 'These are all essential conditions to achieve more ambitious recycling targets and to ensure...

Shares of Hindalco Industries Ltd are trading sharply higher after U.S. rival Alcoa Inc reported better-than-expected earnings, several traders said. Alcoa also increased its 2014 growth estimate for the North America commercial transportation market. Shares of Hindalco, India's leading aluminium producer, rose as much as 5.1 percent to 177.6 rupees. Its unit Novelis Inc directly competes with Alcoa in the North American markets.

General Motors has announced a $240 million investment to build a new engine plant in the Argentina in addition to its recent investment of $450 million for the production of a new global model in the region. To date, GM has invested $740 million in Argentina. The announcement was made at a government event by GM president Dan Ammann and president of GM South America Jaime Ardila with Argentinian Chief of Staff Jorge Capitanich and Industry Minister Débora Giorgi in attendance. Argentina will be responsible for manufacturing a new Euro 6-certified aluminium engine. The plant will have an output of 90,000 engines per year, with 10,000 units going to the European Union annually. In 2012, then CEO of GM Dan Akerson announced the company would invest $450 million between 2013 and 2015 to...

Sapa is investing in an aluminium extrusion press in Kuppam for the production of multi-port extrusions and drawn tubes for automotive and HVACR heat transfer applications. The company will become the first local manufacturer of such products in India. Sapa is experiencing high growth in India, both in automotive and in the heating, ventilation, air conditioning and refrigeration (HVACR) industry. In automotive, with more than 3.6 million vehicles produced annually and forecasts calling for 6 million vehicles by 2020, India is one of the areas with major growth. Sapa is aiming to take the lead in India’s automotive market for aluminium-based heat transfer solutions and fluid lines, following the strong leadership position that it has achieved worldwide. In HVAC&R, the substitution of...

Aluminium settled down -0.22% at 114.15 slipped on Friday but still posted their biggest weekly rise in more than nine months, having earlier hit a four-month peak as U.S. jobs data boosted the demand outlook for industrial metals. Earlier this week prices gained as global aluminium producers have done well to curtail output and also successfully ward off the challenge posed by the proposed rule change for LME-linked warehouses. In the June quarter, aluminium prices on an average have risen 5.3% over the preceding quarter. Report says the regional premium payable for metal deliveries to Japan for the July-September quarter has risen by 8-12% over the preceding quarter. All this should mean extra dollars for every tonne of metal produced by aluminium firms. Regional premiums are payable by...

In a research note released Monday, Goldman Sachs analyst Sal Tharani upgraded Century Aluminum from Sell to Neutral. The analyst stated, “We were wrong on CENX as its cost cutting initiatives,” adding that the price of aluminum was better than they had expected and contributed to the jump in the company's stock price. In addition, the analyst is raising 2014, 2015 and normalized earnings per share estimates to $0.32, $1.00 and $1.50, from ($0.02), $0.45 and $0.75, respectively. This is primarily due to better aluminum all-in pricing, cost cutting measures and Century Aluminum's new power purchase strategy. Shares of the company are fairly neutral on Monday.

Much to the relief of aluminium producers, the white metal has outperformed other non-ferrous metals in price gains, except nickel, which managed to advance 40 per cent after Indonesia put a ban on minerals exports in January. The three-month aluminium price, which in some intraday trades at London Metal Exchange (LME) breached the psychologically important $1,900 a tonne, has risen to its highest since August 2013. The undoing of aluminium for a long time has been excess capacity outside China and its use leading to the build up of stocks of over 5 million tonnes (mt) at LME warehouses. Equally big, if not larger, inventories are held at non-LME storehouses. Such large stocks coincided with major demand slump for all metals in the world's leading economies struggling to come out of...

A bearish target at $1,898 per tonne remains unchanged for LME aluminium as the correction from the July 3 high of $1,938.50 has not completed. The correction was triggered by resistance at $1,931, the 76.4 percent Fibonacci projection level of an upward wave C that developed from the May 21 low of $1,754.75. It has been strengthened by a similar resistance that was established by a trendline ascending from the April 11 high of $1,902.50. For three days, aluminium has closed below $1,931. This might not be an accumulation of the bullish momentum, instead, it looks more like a reversal of the uptrend. A break above $1,931 will confirm the extension of the wave C towards $1,986, the 100 percent projection level. The views expressed are his own. No information in this analysis should be...

Hong Kong-listed CITIC Resources Group announced today that it has filed a claim in Qingdao Maritime Court against the operator of the bonded warehouse at Qingdao port, requiring the operator to confirm the group’s ownership of the alumina and copper held by the operator, and to release and deliver all such alumina and copper to the group or to compensate appropriately. CITIC Resources said last month it had been unable to secure around 120,000 tonnes of alumina, more than half of the alumina stocks it had titled to stored at the port pending payment by buyers and delivery. "Until the status of the investigation is clarified and the group has conducted its own investigation, the company is not able to accurately assess the impact on the Group's alumina and copper stored at Qingdao port or...

Kaiser Aluminum Corp. CEO Jack A. Hockema sold 5,000 shares of Kaiser Aluminum Corp. stock in a transaction dated Tuesday, July 1st. The shares were sold at an average price of $73.51, for a total transaction of $367,550.00. Following the completion of the transaction, the chief executive officer now directly owns 23,190 shares of the company’s stock, valued at approximately $1,704,697. The sale was disclosed in a filing with the SEC, which is available at this link. Kaiser Aluminum Corp. opened at 73.16 on Monday. Kaiser Aluminum Corp. it has a 1-year low of $62.09 and a 1-year high of $74.27. The stock has a 50-day moving average of $70.48 and a 200-day moving average of $70.3. The company has a market cap of $1.308 billion and a price-to-earnings ratio of 16.02. Kaiser Aluminum Corp....

Tecnoglass, Inc. ( TGLS ) announced that it has acquired selected assets of RC Aluminum Industries, Inc. Terms of the transaction were not disclosed. Tecnoglass stated that among the assets acquired are approximately $70 million in RC Aluminum backlog for high-rise projects in south Florida, all of which is expected to begin shipping by year-end 2014, the right to complete a number of RC Aluminum's contracted projects in south Florida with an estimated value of about $12 million and Miami-Dade Notice of Acceptance or NOA for more than 50 products manufactured and sold by RC Aluminum. Commenting on RC Aluminum, the company said it designs, manufactures, and installs glass products for architects, designers, developers, and general contractors. Tecnoglass has also hired Raul Casares, the...

General Motors will invest $740 million in Argentina through 2016 on its first South American factory turning out aluminum motors, Buenos Aires announced Monday. The announcement comes as the Argentine auto industry saw a more than 20 percent drop in production in the first quarter compared to the record performance in the same period in a year earlier. The new unit will be installed in the GM complex in Rosario, an agro-industrial port city some 300 kilometers (190 miles) northwest of the capital, according to the office of President Cristina Kirchner. The complex currently employs some 2,800 people and produces seven models. Production at the new factory is set to start in 2017 and aims to reach 140,000 motors a year. General Motors suspended production in Argentina in 1978, but...

The City of Santa Clara is considering citywide automatic curbside recycling. If the majority of citizens indicate through an online survey that they want the program, officials say the city will move forward with the plan. If approved, all residents will be signed up for the service, but they will be able to make a phone call and opt-out at any time, Santa Clara City Manager Ed Dickie said. The city, itself, would not provide the service, but it would administer the billing through the monthly utility bill. If a resident terminates the service, the resident would no longer be billed for it. This service would be done through Republic Services – a trash and recycling provider formerly known as Allied Waste – that already offers curbside recycling to Santa Clara residents who subscribe....