
India's aerospace and defence sector is expected to drive growing demand for specialised aluminium alloys, creating opportunities for domestic manufacturers such as Remal Alcast Pvt. Ltd. The company is expanding its high-performance aluminium billet manufacturing capabilities in Maharashtra, having recently completed its 1,000th billet cast as it progresses towards a planned annual production capacity of 72,000 tonnes. Remal began manufacturing aluminium billets in 2025 at its integrated casthouse in Vile Bhagad, Maharashtra. The facility produces billets across the 1xxx, 2xxx, 3xxx, 4xxx, 5xxx, 6xxx and 7xxx alloy series and operates under AS9100D, ISO 45001, ISO 14001 and ISO 9001:2015 certifications. Rather than concentrating on commodity-grade billet production, Remal is building its...
Rio Tinto has marked a new construction milestone at its Kangwinan bauxite project in Queensland, a major development expected to replace production from the ageing Andoom mine and help offset the planned closure of Gove in 2029. A groundbreaking ceremony at the USD 1.9 billion development near Weipa follows Rio Tinto's investment approval in October. The project is expected to add 20 million tonnes of annual bauxite production capacity, taking Weipa's overall capacity to approximately 44 million tonnes per year. First production is targeted for 2029, with full production expected by 2032. Kangwinan will establish a new bauxite production centre approximately 15km south-east of Rio Tinto's existing Amrun mine. The development forms part of the company's efforts to maintain production in...
Grow with
AL Circle

Laying the foundation stone for the integrated recycling line for used beverage cans (UBC) at its Neuss plant in Germany, Hydro today marked another milestone in this EUR 45 million project. The recycling line, covering an area of some 20,000 square meters, will double our existing annual recycling capacity to around 100,000 tonnes and be able to process a wide range of can scrap. “We are installing world-leading technology to sort used products, which will make us a better recycler. The new facility, scaled to process 50,000 tonnes of used beverage cans, will make us a bigger recycler and a greener company, as we through recycling of aluminium avoid 95 percent of the energy needed to produce primary aluminium and bring the aluminium resources back to new life,” says Executive Vice...

China imported 4.44 million tonnes of bauxite in March, up 46.91% from February and 144.07% from a year ago, customs data showed. Stockpiles of imported bauxite built up in 2013 are running out, which explains why March’s imports were such robust, SMM understands. Malaysia contributed the most to the growth in China’s imports, followed by India and Australia. Chinese alumina refineries reported more orders and the monsoon in Malaysia ended, boosting Malaysian bauxite shipment to China. China’s bauxite imports fell 21.74% year-on-year to 10.05 million tonnes in Q1, though, as Indonesian bauxite continued to arrive in the same period last year.

China’s government would remove export taxes on bars and rods of primary aluminium and aluminium-alloy from May 1, 2015, according to China daily. Kenanga Research said this would have a negligible impact on Chinese exports and aluminium premiums in Europe and US in the near term. It explained that despite the removal of export tax, Chinese aluminium is still less attractive for its pricing compared to international aluminium prices. “We gather that the 3-year average aluminium price is USD1,900 per tonne while the average Japan premium is USD293 per tone. Thus, all-in international aluminium price is about USD2,190 per tonne, 4.8% cheaper than that of China Shanghai 3-year average of USD2,300 per tonne,” it said. The research house said that most of China’s production is for its own...

Aluminum fell the most in two months on concern more exports from China of products made from the metal will exacerbate a global glut. China plans to scrap a 15 percent export tax on rods and strips made from primary aluminum effective May 1. The move may send world prices lower amid ample supplies in the Asian nation, according to Bloomberg Intelligence. “China is going to ensure it can support its aluminum sector,” David Wilson, an analyst at Citigroup Inc. in London, said in a telephone interview. “It’s going to keep the market in oversupply. As long as they are still making a margin, they will continue to export, which is not positive for prices.” Aluminum for delivery in three months fell 1.6 percent to settle at $1,777.50 a metric ton at 5:50 p.m. on the London Metal Exchange, the...

A Rathdowney councillor has appealed to the council to be the first local authority to run a recycling collection pilot scheme using a special collection lorry which could call to estates or particular area’s around the county. As last week’s meeting of the Borris-in-Ossory/Mountmellick area councillors, Cllr John King proposed that the council introduce a deposit and refund system for schools and clubs to encourage people to recycle cans and bottles in order to stop dumping in the countryside. Councillor King also introduced the concept of the specially adapted collection trucks to the council executive. “In England they have these trucks with separate compartments for plastic and cans, paper, food waste, glass and cardboard. They are bought by the different councils and go around...

Although Honda has yet to reveal the intimate details about the new Acura NSX hybrid supercar, in the latest SAE World Congress the company revealed some interesting features about its body construction including a new aluminium technology used in the car for better rigidity. Honda claims, NSX will be the world’s first vehicle to apply the process of aluminum ablation casting to produce large ultra-rigid nodes or junction points within the crush zones of the body. The ablation nodes will have sockets into which aluminum extrusions will be inserted and then MIG-welded as part of the spaceframe. The ablation castings also allow Honda to use traditional aluminum castings at other strategic locations in the spaceframe and as the primary mounting points for suspension and power-unit...

Kaiser Aluminum Corporation today announced that, as a result of the definitive expiration of its obligation to make annual variable contributions to the union voluntary employees' beneficiary association (the "Union VEBA") for any period after September 2017, it has removed from the Company's consolidated balance sheet the Union VEBA's plan assets and liabilities, and related deferred tax liabilities and accumulated other comprehensive income amounts. Additionally, the Company has recorded a liability of $45 million for the quarter ended March 31, 2015 to reflect the estimated remaining annual variable contributions that could be made to the Union VEBA through September 2017. As previously announced, on January 28, 2015, members of the United Steel, Paper and Forestry, Rubber,...

Ball Corporation is honoring seven of its 58 global manufacturing plants with the R. David Hoover Sustainability Award for making a substantial impact toward Ball's sustainability goals, both inside the plant and within their communities, in 2014. The annual award recognizes one plant in each region of Ball's global beverage can business and its global food and household products business for the best overall sustainability improvement, as well as greatest impact in their local community. The most sustainable plants of 2014 and examples of their operational achievements from last year include: Global Metal Beverage Packaging • Wallkill, New York (Beverage Cans, North America): Reduced its total recordable incident rate by 66 percent. • Belgrade, Serbia (Ball Packaging Europe): Reduced its...

The 1st Aluminium Sector workshop under Knowledge Exchange Platform (KEP) initiative was hosted by Vedanta, Jharsuguda unit, here at the Auditorium, Vedanta Meadows for exchange of best practices in Aluminium industries covered under the Perform Achieve and Trade (PAT) scheme. PAT is a flagship initiative of Bureau of Energy Efficiency (BEE) Govt. of India, which is a mechanism for promoting energy efficiency in large industries. Ten Aluminium Industrial units covered under the PAT Scheme are expected to achieve energy savings of 0.456 million tonnes of oil equivalent, which is 7% of the total energy savings potential that 478 designated Consumers aim to achieve by 2014-15. The Knowledge Exchange Platform was launched on 26th February, 2015 by BEE in partnership with Institute for...

Press Metal has not been having the best phase and the situation is threatening to get worse as China abolishes its export duty on non-alloyed and alloyed aluminium rods and bars starting next month. The company however seems undeterred as a close source to the company says, “We should be okay. We are operating at full capacity.” China’s overproduction and increased exports have already created a supply glut in the global aluminium market affecting the price of the metal. According to reports China has exported 43% more unwrought aluminium and aluminium products in the first quarter of this year amounting to 1.2 million tons. Concerns are arising about the company’s future in the face of this global supply glut although sources believe that Press Metal will not be much affected by the new...

The third bauxite mining site in Fiji has been issued a lease making it the largest site so far in the Northern Division region. Nawailevu was the first site being mined by the Chinese company Aurum Exploration Limited and has yielded almost 1 million tonnes of bauxite. Rehabilitation work has also been initiated at the site by the mining company. Mining work has just begun at the second site in Letuku, Bua expected to yield 400,000 tons of bauxite where the produce will be exported solely to China. The company has now started clearing the third site at Dreketi for mining which covers a larger expanse of area, 222 hectare compared to the 150 hectares of Nawailevu. Malakai Finau, the Mineral Resources Department Director says that the company has just started its work on the site. "In fact...

Jawaharlal Nehru Aluminium Research Development and Design Centre (JNARDDC), is organizing one day Meet on Aluminium extrusions in strategic applications and challenges ahead. The theme of this workshop is to identify strategic applications of aluminium extruded profiles in sectors such as defence, aerospace, automobile etc and share ideas related to aluminium extrusion of hard alloys, potential users, equipment selection suitable for this application, R & D focus for port hole die development to minimize trial and error methods. The Meet will provide a common platform for participants to discuss about technology of aluminium extrusion, the problems faced, the role of simulation in product design changes from end users in the aluminium industry. The target audience for the Meet are...

Much of the aluminum currently available in the United States is of shapes and profiles that are less than ideal for U.S. fabricators, prompting traders to sell it at discounts and raising concerns about the availability of standard shapes. A high physical premium has attracted imports from abroad, and a weakening forward curve has encouraged traders to withdraw metal from storage in U.S. warehouses for quick sale, flooding the market with aluminum. However, U.S. traders and industry sources said very little of that aluminum is low-profile sow or t-bar, the shapes that U.S. rolling mills are best equipped to use in fabricating sheet for the beverage can and automotive industries. T-bars are long, smooth slabs of metal with a short base that enables forklift operators to transport them,...

If you have any soda or beer cans lying around, Saturday's the day to recycle them. Right now recycling one pound of cans will fetch about 30-cents. But on Saturday, Moscow Recycling is offering 45-cents per pound. It only takes about 30 cans to make a pound. And every little bit helps because aluminum can be recycled over and over again. "It saves not only cans from going into the landfill but from the natural resources and the raw resources it takes: the bauxite it takes to make an aluminum can," said Sandye Crooks, Community Outreach and Education Coordinator. The buy-back runs from 9:30 a.m. to 5:30 p.m. at Moscow Recycling. There'll be free goodies, drinks and healthy snacks, as well as gift certificate giveaways and a raffle.

Metal recycling organisation Alupro has called for an “overhaul” of how PRNs are issued, following a shortfall in the amount of aluminium packaging recovered in the first quarter of 2015. Alupro, which represents aluminium packaging producers, claims that delays in the accreditation process means that a large amount of aluminium recovered from incinerator bottom ash (IBA) has been underreported in the provisional data. The interim figures, which were published by the Environment Agency earlier show that 14,871 tonnes of aluminium was accepted or exported between January and March 2015 – below the estimated 18,000 tonne quarterly obligation that producers needed to be on course to meet the 2015 target. Some industry experts blamed the shortfall on the removal of protocols for aluminium...

China is already infamous for its excess production of aluminium causing a global oversupply hampering the aluminium prices. Now as they announce scraping the export taxes on some products, they may worsen the situation even further. While the world aluminium producers hurried to cut production to reduce supply and boost aluminium prices, China continued its relentless production despite facing crippling losses. Suffering aluminium smelters were buoyed by government subsidies creating a disparity in the global aluminium situation. The world aluminium industry, outside China, faced aluminium deficiency while China was in oversupply. Still the situation was in control because of China’s duty placed on the export of primary metal. Ma Kai, a Beijing-based analyst at China International...

While noting that it was not possible to forecast the extent of electricity curtailment over the remainder of the year, aluminium manufacturer Hulamin says it is “already clear” that its earnings per share (EPS) and headline earnings per share (HEPS) for the six months to June 30 will be more than 20% lower than those of the first six months of the prior year. The company outlined in a trading update on Thursday that first-quarter manufacturing output had been severely impacted by electricity supply curtailments by energy utility Eskom, as well as quality issues on two product lines. Hulamin operated a complex serial manufacturing process that ran on a continuous basis and, as a result, lost production could not be recovered. “Product temperatures must be carefully maintained within...

Seychelles Breweries Ltd (SBL), the Indian Ocean island archipelago's only brewery, is for the first time making available canned versions of Coca-Cola, Sprite and Fanta, three of its lines of soft drinks bottled and sold locally. All three soft drink brands are produced under license from the Coca-Cola Company, an American multinational beverage manufacturer, which is headquartered in Atlanta, Georgia, with authorized bottlers worldwide. Seychelles Breweries, being the only authorized bottler of the Coca-Cola Company in the Indian Ocean archipelago, was already producing Coca-Cola, Sprite and Fanta locally in 500 ml and 1.5 litre plastic polyethylene terephthalate (PET) bottles. In a press statement sent to SNA, the company's Managing Director Patricia Berthelot, said the new 330 ml...