
Aluminium du Maroc has published its financial results for the first half of 2026, providing investors with an updated reference for assessing the Moroccan aluminium producer's business performance. The company released its half-year results on November 12, 2026, according to a notice published by Morocco's Capital Market Authority (AMMC) on November 13. The filing covers the six months ended in the first half of the year and marks the company's latest formal financial reporting update. To know the global production, demand and consumption forecasts of aluminium extrusions, explore our report "The World of Aluminium Extrusions to 2035" H1 2026 results provide updated performance reference The publication gives investors an opportunity to review Aluminium du Maroc's financial performance...
As the European Union (EU) revises its CO₂ emission standards for cars and vans, European Aluminium is urging policymakers to recognise low-carbon aluminium alongside low-carbon steel in the proposed 2035 automotive credit system. The association, via its position paper, warns that restricting material-based emission credits to EU-produced low-carbon steel could distort vehicle design decisions, weaken the competitiveness of Europe’s aluminium industry and undermine the bloc’s technology-neutral approach to decarbonisation. At the centre of the debate sits Proposal 2025/0420 (COD), which introduces a compliance offset for the 10 per cent of fleet emissions remaining after 2035. Under the proposed mechanism, manufacturers would be allowed to use fuel credits or credits related only to...
Grow with
AL Circle

According to a recently published market research report, the global aluminium blister packaging market is all set to grow at a CAGR of 6.80 per cent over the period 2015-2019. A blister pack is made up of aluminium foil (or plastic) with a cavity or pocket made from thermoformed plastic. It helps protect products from contamination and external conditions such as humidity. Blister packs are manufactured primarily through two processes: thermoforming and cold forming. According to the report, demand for interactive and user-friendly packs is rising because of the rise in the number of retail outlets worldwide. Blister packs not only safeguard products against harmful gases, ultraviolet rays, humidity, and mechanical hazards, but also provide brand recognition and a user-friendly interface...

Car assemblers in Pakistan are likely to further increase prices of their different variants aimed at passing on the financial impact of recent increase of 15 percent in Regulatory Duty (RD) on iron and steel products and 10 percent on aluminium alloy, according to well informed industry sources. Indus Motors which assembles Toyota cars recently increased the price of cars and would raise them further by passing on the impact of RD to the consumers. The two other players: Suzuki and Honda are also expected to increase prices. All the parts and sheets are either made up of imported steel or aluminium which are primary raw materials and any impact on their prices will be passed on to the consumers. The impact of increase in imported steel and aluminium on vender industry will also...

China Zhongwang Holdings Limited, the world's leading aluminium fabricated product developer and manufacturer, announced its audited annual results for the year ended 31 December 2015. During the year under review, the economic growth of China and the global markets continued to slow down. The Group gradually adjusted its production capacity and optimized the product mix by further increasing investments in technology as well as research and development (“R&D”), thereby improving its profitability and achieved total revenue of approximately RMB16.17 billion, representing a slight increase when compared with that of 2014. As the revenue contribution from high-end products increased, the overall gross margin increased by 4.9 percentage points to 32.9 per cent year-on-year. Profit...

A slump in China’s aluminium semis exports in February sparked concerns over export volumes in March. SMM sees any potential rebound to be marginal. Higher SHFE/LME aluminium price ratio, which climbed above 7.6 in March, will be the main constraint on aluminium semis outflows, SMM explained. Some Chinese traders told SMM that they will cut exports against unfavorable price ratio. Large aluminium processors reported stable export orders, though, SMM learns, since those producers have signed long-term contracts with overseas buyers. Customs data showed China’s aluminium semis exports totaled 260,000 tonnes in February, down 34.1 per cent from a year ago and down from January’s 330,000 tonnes. The Chinese New Year holiday was mainly blamed for the decline.

Aluminium prices at Multi Commodity Exchange (MCX) Mumbai, advanced by INR 2 per kg at the non-ferrous market on March 26, Saturday, largely due to pick-up in demand from consuming industries. However, other base metals held steady in thin trade. Traders said increased demand from consuming industries and reports of a firm trend in its prices in Asian region kept aluminium prices higher. In the national capital, aluminium ingots, sheet cutting, wire scrap and utensil scrap added another INR 2 each to INR 150, INR 146, INR 146 and INR 144 per kg respectively. Following were the rates of aluminium and aluminium products (in INR per kg) on March 26: • Aluminium ingots INR 150 • Aluminium sheet cutting INR 146 • Aluminium wire scrap INR 146 • Aluminium utensils scrap INR 144

Australian Bauxite hopes it will be able to finally lock in a sale within the next month for some of the 120,000 of material extracted from its Campbell Town mine last year. Trouble struck the small mining company’s Bald Hill mine in December when the global bauxite mining collapsed, just after it commenced operation. This resulted in the cancellation of a substantial sale to a Chinese buyer shortly after. Australian Bauxite Chief Executive Ian Levy said market conditions were gradually returning due to a decision earlier this year by the Chinese government to ease bank credit conditions. He said the company was now negotiating sales contracts and receiving requests that they were not receiving last year. “Because we are such a small operation, we need to be paid when it is put on the...

Aluminium increased for a third day to the highest level in six months as metals advanced in Shanghai after a report that industrial profits increased in China, ending a seven-month losing streak. The London Metal Exchange was closed for a public holiday. The metal used in everything from beverage cans to window frames added as much as 1.1 per cent to 11,830 yuan ($1,818) a metric ton, the highest since September 25, before trading at 11,810 by 11:29 a.m. local time. Futures in Shanghai have rallied about 22 per cent from their record low on November 24 as China’s biggest smelters vowed to curb capacity and output fell 7.7 per cent from a year earlier in the first two months of 2016. Other non-ferrous metals declined last week, as commodities were hurt by a stronger dollar. Industrial...

Aditya Birla Group’s Odisha based Aditya Aluminium at Lapanga in Sambalpur district has announced having achieved its full capacity utilisation. Start up of the 360th Pot of Potline was done on Friday, thereby completing the commissioning phase, a company statement said on Saturday. Aditya Aluminium is a smelter-power plant complex at Lapanga with 360,000 tonnes smelter supported by a 6 x 150 MW coal based captive power. On this occasion a function was held in the plant premises where senior officials from the company’s management and a large number of employees were present. The MoU with Odisha government for Aditya Aluminium was signed in 2005 and the MoEF clearance was obtained in 2006. The first concrete was laid in February, 2011 after getting 2nd stage forest clearance from MoEF...

India's state-owned aluminium producer National Aluminium Co (Nalco) has zeroed in on three locations in the Arabian Gulf - Iran, Oman and Qatar - to set up a nearly US$2bn smelter unit. Iran is the frontrunner to host the new facility. Nalco has been on the look out for a location abroad to build the 500,000 metric tonnes-per-year aluminium smelter. The company also considered potential sites in South East Asia and the UAE, in addition to Iran and Oman. According to latest available reports, Nalco is in advanced stages of discussions to explore the possibility of setting up the smelter in Iran. The company will also visit Oman and Qatar to work out the best place to set up the project. Low power and infrastructure costs are among the key considerations of Bhubaneswar, Odisha-based Nalco,...

The total consumption of aluminium in India is going to experience a major leap in the foreseeable future reaching 20 million tonnes (mt) from the present 2mt, claims Vedanta Resources Chairman Anil Agarwal. According to Mr. Agarwal, “It (India’s aluminium consumption) is going to be 20 mt. Large industries will move to aluminium products. Railways, construction, aerospace, automobiles will contribute to higher growth of the metal.” At a recently held CII event in New Delhi, he said aluminium as a light metal has immense potential of becoming the mainstay of industries in future and setting up a small and medium enterprise (SME) in the sector would require an investment between INR 25-500 crore. On being asked about credit related issues SMEs face in India, Mr. Agarwal said: “It is a myth...

Bauxite shipments from Astralia to China have zoomed past Malaysia's bauxite shipments to China. According to the latest export-import data released by the General Customs Administration of China, Australia shipped 1,057,321 million tonnes (mt) of bauxite, the principal ore of aluminium, to China in February 2016, while Malaysia shipped 986,930 mt during the same period. Malaysia’s three-month ban on bauxite mining, which started on January 15, sent China’s imports from the once top supplier down 54.3 per cent month-on-month in February. Such decline in bauxite shipments caused China’s total imports to tumble 39 per cent from January to 3.22 mt in February, customs data showed. SMM attributes lower imports of bauxite partly to production cuts by major Chinese alumina refiners, especially...

Alumina import to China rose 13 per cent year-on-year in February 2016 and 23.12 per cent year-on-year during January - February 2016, revealed data released by the General Administration of Customs, China on March 21. Total alumina imported in February stood at 372,375 million tonnes, while it scaled up to reach 879,903 million tonnes during January - February 2016. Australia shipped 191,152 million tonnes of alumina to China in February and 550,296 million tonnes over January - February. Alumina import from Brazil to China during January - February also increased 25 per cent from the corresponding period previous year. Customs data showed, alumina imports from Vietnam and India to China during January - February period declined 26 per cent and 73 per cent respectively from the same...

LME aluminium is expected to test a support at $1,470 per tonne, with a good chance of breaking below this level and falling more towards $1,449. The support is identified as the 86.4 per cent Fibonacci retracement on the rise from the January 12 low of $1,449 to the March 7 high of $1,605, blocking the way towards $1,449. Labelled B, the third wave of a three-wave cycle from the November 23, 2015 low of $1,432.50 has ended at $1,449. Wave theory suggests that this low may be approached. Resistance is at $1,486, the 76.4 per cent level, a break above which may open the way towards the 61.8 per cent level at $1,509.

Less than a year after relocating to a 192,000-square-foot building at 7505 Durand Ave., Beck Aluminum has expanded its operations, making improvements in both capacity and efficiency. It has added 25 jobs, bringing their total number of employees in Mount Pleasant to 68, according to the Racine County Economic Development Corporation. Part of Ohio-based Beck Aluminum Alloys, Beck Aluminum is one of the only suppliers of both primary and recycled aluminium ingot to the casting industry. Beck Aluminum has recycling plants in Racine WI, and Lebanon PA. The company moved from its original location at 1349 23rd St. last year and settled on the Durand Avenue location based after considering several strategic factors. After relocation, the company made a number of improvements to the building,...

Sinolight Aluminium, the largest aluminium processing enterprise in China, has introduced a wide range of aluminium coils, discs foils, color coated coils etc for industries around the world. Aluminium is a light metal and its coils, discs, foils could be used in a variety of industries. China based Sinolight Aluminium produces aluminium coils and discs of various specifications for industrial use. Recognized as the largest aluminum processing industry in China the company with high grade aluminum metal and with the modern technology produces quality coils and discs for offset printing household appliances and construction and decoration and other industries. The leading aluminium manufacturer boasts of its manufacturing facility and the equipment to help deliver international class...

Eaton has added to its Crouse-Hinds series with the new Sunnector aluminium direct-current (DC) collection system, which is designed for use with 5 MW and larger-scale, grid-tied solar PV projects that incorporate fixed-tilt ground-mount racking. The power management company says the new system includes wire harnesses and combiner boxes meant to support DC strings made with aluminium wire, which help reduce labor and material costs by 15 per cent, on average. According to Eaton, the system allows installers to take advantage of lower-cost and lighter-weight aluminium wire while providing equivalent performance to copper wire. Cost savings correlate to string length, and the system is designed for applications where string run lengths are longer. While taking advantage of the cost savings...

As the global car industry is going greener, South Korean carmakers are working on making car bodies as light as possible to guarantee higher fuel efficiency, meaning less greenhouse gas emissions. Kia Motors Corp. said Thursday that it used aluminium made by U.S.-based leading automotive aluminium maker Novelis Inc. for its new hybrid utility vehicle Niro slated for launch next week in the car’s hood and tailgate in an effort to reduce the overall weight of the car. Its sister company Hyundai Motor Co. also used aluminium for its first dedicated hybrid IONIQ. The Korean car makers hope to improve fuel efficiency and lower emissions by using aluminium, which is known to weigh one-third of steel, in their cars. Hybrid cars are usually heavier than gasoline-run cars because they are fitted...

Jaya Hind Montupet, a joint venture of Jaya Hind Industries (a subsidiary of Force Motors) and Montupet France, inaugurated its ultra-modern gravity die casting foundry at Dewas, near Indore in Madhya Pradesh. While the Pune-based Jaya Hind Industries is engaged in aluminium die casting, Montupet is a French industrial group which specialises in the design and production of complex cast aluminium parts for the automotive industry. The new facility was inaugurated by Yashodhara Raje Scindia, Minister for Commerce, Industries and Employment, Madhya Pradesh; Dr Abhay Firodia, chairman, Abhay Firodia Group of Industries, and Prasan Firodia, director, Jaya Hind Montupet. The joint venture has been set up for the development and manufacture of automotive cylinder heads in India. A combination...