
Hindalco Industries’ wholly owned subsidiary Novelis Inc has entered into an agreement to sell two of its Chinese businesses for approximately USD 265 million, with the possibility of receiving another USD 10 million if certain conditions are met. The agreement, signed on Saturday, November 14, is with Shenzhen Hongzhi Industrial Investment Co Ltd, potentially along with one or more of its affiliates. The proposed transaction covers Novelis (China) Aluminum Products Co Ltd and Novelis (Shanghai) Aluminum Trading Co Ltd, both wholly owned by Novelis Inc. Completion is expected within 12 months, subject to regulatory approvals. Until the transaction closes, both businesses will continue to remain part of the Hindalco group. Changzhou plant among the businesses being sold The two Chinese...
Futures: The most-traded SHFE aluminium 2701 contract opened at RMB 22,200 per tonne in the night session on Nov 13, hit a high of RMB 22,265 per tonne and a low of RMB 22,115 per tonne, and closed at RMB 22,125 per tonne, down RMB 20 per tonne or 0.09 per cent from the previous close. It consolidated on a weak note, with prices running below all moving averages across the 5per 10per 20 per 40 per 60-day periods, which continued to trend downward and exert pressure. Trading volume during the session was 83,517 lots, with open interest at 277,000 lots, up 8,598 lots, driven mainly by bearish positioning. On the technical front, the 4-hour MACD remained below the zero axis, with DIFF below DEA and green bars persisting, indicating bearish momentum has yet to exhaust and the overall...
Grow with
AL Circle

The International Trade Administration (ITA), last week, rescinded the Department of Commerce’s (DOC) request to 124 Chinese extruders to participate in the 2014 Administrative Review. One of the companies which were reached out by the DOC was Zhongwang. The action was customary and a routine process by the DOC. Every year it sends notices and requests to Chinese extruders inviting them to participate in that year’s administrative review. All of those that do not respond to that invitation (or respond in the negative) will have that offer rescinded by a certain date as a matter of protocol. For the DOC this is their way of closing the books on which companies are reviewed. It has no bearing on circumvention or scope cases. The DOC announced its preliminary rates for the afoesaid review....

Excess aluminium production in China is damaging the prospects of aluminium producers in the rest of the world, purely because of the size of China’s massive aluminium industry, observed analysts at MetalMiner. As prices on the Shanghai Futures Exchange have risen this year, idled smelters have restarted and new capacity has continued to come on-stream. Annualized run rates increased by almost 650,000 mt over the course of April and May, Reuters reports, with May’s average daily output of 86,290 mt the highest since November 2015 before prices fell below $1,518 (10,000 yuan). The other factor apparently effecting Beijing’s attitude is the rapid rise in capacity is coming from new state of the art low cost aluminium smelters in China’s Northwestern provinces. Aluminium is not seen as an...

The legal war between Alcoa Inc and Alumina Limited centred on the former’s strategic decision to subdivide itself has reportedly intensified. In a recent development, Alumina has sought relief from the confidentiality clauses attached to information provided by Alcoa in the wake of the aluminium giant’s move to the courts to avert Alumina’s claim that a bank of pre-emptive rights would be triggered by the act of separation. Alcoa, last September, confirmed plans to split into Upstream and Value-Add, hi-tech businesses in due course of time. Part of the upstream division is a bauxite and alumina business called Alcoa World Alumina and Chemicals (AWAC). Its 60 per cent stakes are owned by Alcoa while the balance is owned by Australian listed Alumina. Alcoa operates the business and...

3D printing service bureau i.materialise has introduced a new member to their 3D printing material family: aluminium. This is the freshest addition to Belgium-based company's 3D printed metal roster, which includes titanium and steel. 3D printing service bureau boasts an extensive list of material options comprising 21 different materials and over 100 color and finish combinations. The newly unveiled 3D printed aluminium is ideal for producing parts that are strong and lightweight, particularly useful for functional and spare parts, as well as jewelry. The 3D printed aluminium that i.materialise is now offering has a slightly more matte appearance in comparison to traditionally milled aluminium, and is a bit rougher around the edges too. To print their new aluminium material, the 3D...

Global aluminium pigments market was valued at $332.9 million in 2015 and is anticipated to reach $581.9 million by 2024, expanding at a CAGR of 6.4 percent between 2016 and 2024, as per the latest Industry Study. Aluminium pigments are employed widely in paints and coatings, plastics, personal care, printing inks, and construction materials. Consumer preference for high performance aluminium pigments with attractive aesthetic features has been rising significantly of late. Aluminium pigments are widely employed in the formulation of automotive paints & coatings to enhance their aesthetic properties. Automotive OEM coatings, automotive interior coatings, wheel coatings, automotive parts and accessories, and automotive refinishes are the major areas where aluminium pigments are used....

Chalco and Baosteel Group signed a cooperation framework agreement on June 17 over automotive aluminium sheet, the China Nonferrous Metals Industry Association (CNIA) said on its website. According to the agreement, both sides will establish a joint venture in the future to jointly develop, produce and sell automotive aluminium sheet. The move will be a win-win for Chalco, which has strong technical strength and rich experience in precision aluminium plate/sheet, strip production, and Baosteel Group, which enjoys big market share in high-end automotive steel sheet.

SHFE 1608 aluminium will consolidate at highs of RMB 12,250-12,400/mt today, with eyes on UK referendum. LME aluminium will move at highs of USD 1,625-1,645/mt. In China’s spot aluminium market, spot premiums of RMB 90-130/mt are expected over SHFE 1607 aluminium contract. Key macroeconomic indicators for base metal prices Market will eye June manufacturing PMIs from the euro zone and US and US new home sales today. With UK referendum just around the corner, market caution will intensify. France’s manufacturing PMI might remain below 50 in June, which will be a drag on manufacturing in the euro zone. Manufacturing PMIs in Germany and the euro zone are expected to continue rising. New York and Philadelphia Fed manufacturing indexes for June were positive. US manufacturing PMI pointed to...

LME aluminium still targets $1,648 per tonne, as it has been hovering above a resistance at $1,624 after breaking it. The resistance was provided by the 86.4 percent Fibonacci projection level of an upward wave C, the third wave of a three-wave cycle from the Nov. 23, 2015 low of $1,432.50. The next resistance will be at $1,648, the 100 percent level, a break above which could lead to a gain to the 114.6 percent level at $1,673. A break below $1,624, now a support, could cause a loss to the 76.4 percent level at $1,607.

Aluminium Bahrain has approached banks for a $750 million loan towards the financing of its Line 6 expansion project, reported industry sources on Tuesday, June 21. Alba will become the world's largest single aluminium smelter complex, boosting its annual output by 540,000 tonnes to 1.5 million tonnes per year by adding the sixth "potline", used in producing the metal from raw materials such as bauxite. Production from the facility is expected to start in early 2019 and Alba is raising around $3 billion to help finance the scheme, through a mixture of loans from banks and export credit agencies and an international bond or sukuk issue. Alba had initially targeted $3.5 billion, but this was cut back due to lower oil and commodity prices, it said last month. The first stage of this...

Emirates Global Aluminium (“EGA”) will begin construction on a major bauxite mine in the Republic of Guinea, to secure supply of the high-quality raw material for its primary aluminium production facilities in the United Arab Emirates and create a new, substantial revenue stream through significant exports to Asia. EGA announced it has received final approval from its Board of Directors to launch the first phase of the mine, to be managed through its subsidiary, Guinea Alumina Corporation (“GAC”). The project will develop an initial 12 million tonnes per annum (Mtpa) bauxite mine in the Republic of Guinea, where the company holds a concession on more than 1 billion tonnes of bauxite. The project will also include the construction of a dedicated export terminal at Port Kamsar and upgrades...

Automobile parts makers will face the heat of rising commodity prices in the coming quarters. After all, in the last six months, steel prices, the key input for most auto components, rose by about 36 per cent. Aluminium and copper prices too gained across major global markets. All this means higher input costs. Logically, this will translate into higher expenses and lower profitability. An Icra Ltd report analysing 48 large-sized auto component firms shows the positive correlation in the last eight quarters. In the June quarter of fiscal year 2015, when raw material (steel, aluminium, copper) costs comprised 61.1 per cent of sales, the operating margin was 13.6 per cent. Seven quarters later in March 2016, when raw material costs fell sharply to 56.8 per cent of sales, the operating...

Gearing up for the race of the slimmest and highest-performing laptop, HP's luxurious Spectre 13.3 will take the Indian consumer by surprise. At just 10.4 mm, the feather-weight 33 cm (13") diagonal laptop is touted as the world's thinnest and it weighs just about 1.1 kilograms, thanks to its aluminium and carbon fibre built. With the Spectre 13, HP will feature its new logo. HP has crafted Spectre 13 from aluminium and carbon fibre. To give it a nearly a hingeless look, HP has gone for Piston hinges. The Spectre 13 will be available in a dark gray and copper color scheme. The aluminium-carbon fibre made notebook features 13.3-inch full HD screen with Corning Gorilla Glass (1920 x 1080) protection. It is configured with sixth generation Intel Core i5 and i7 processors. According to the...

In an effort to address the growing frustration of the residents over the recent bout of power outages, City Power, the electricity provider of South Africa, has developed a contingency plan that would help curb both cable theft and network overloads. City Power acting spokesperson, Yumna Sheik said,”We have started to provide electricity to informal settlements, replacing copper cables with aluminium cables and building infrastructure to curb cable theft.” The aluminium cable replacement will cost City Power R267 million but Sheik said the value of these cables is far less than that of copper cables. The power utility will, instead of simply replacing copper cables, add measures to substations that will “make it more difficult for cable theft to happen”. In April, it was reported that...

Under the well-known brand name HYLITE® the supplier 3A Composites recently started to also market aluminium composite panels with a foamed core. The core material for the 3 mm and 4 mm -panel thicknesses is foamed in a manufacturing process specially developed for this purpose. The result is an ultra-light aluminium composite panel that is up to 80 per cent lighter than conventional steel sheets or up to 60 per cent lighter than aluminium sheets yet provides the same flexural rigidity. The foamed core panel features other superlative technical properties. Major advantages include dimensional stability at high temperatures and excellent digital printing results, due to the high quality aluminium strips used in the production process. Applications range from totems or canopies over store...

Matalco, a sister company to the recycling firm Triple M Metals, headquartered in Brampton, Ontario, held the grand opening ceremony at its new secondary aluminium plant in Lordstown, Ohio. The company has been in a start-up mode since this past March, and has been producing aluminium billet. Matalco also operates a facility in Canton, Ohio, as well as a plant at its Toronto headquarters location. The company broke ground on the plant on Sept. 17, 2014 and construction started the following month. The facility, roughly 225,000 square feet in size, will primarily be consuming scrap aluminium, along with some aluminium P1020 ingot mixed in. The plant will be making aluminium billet in either log or cut-to-size billet, according to Robert Roscetti, vice president of Matalco U.S. Inc....

Aurukun bauxite deposit has been hit with a legal challenge over the granting of preferred developer status to mining giant Glencore. This has put the future of hundreds of potential jobs at stake. Aurukun Bauxite Developments has lodged a claim for a judicial review to the decision made under the Newman government claiming it was denied natural justice. Mr Nick Stump, who heads the $20 billion mining company, pointed to the decision by then state development minister Jeff Seeney to open and close the bidding process in 24 hours. In court documents ABD claims that the government decision to open and close the bid process in 24 hours did not give it any chance to respond to or make a submission for the preferred developer status. The massive deposit has been on the shelf for more than 40...

The government of Foshan City, Guangdong Province, which is home to China’s aluminium extrusion producers, has announced tough measures to curb environmental pollution by local aluminium extrusion producers, Southern Daily reported. It is required that 80 per cent of aluminium extrusion producers in the city shall install clean energy equipment before October 31, 2016 and all aluminium extrusion producers in the city shall do so before June 30, 2017.

Aleris Corporation announced today that it has appointed Jack Govers executive vice president, president of Europe and Global Markets. In this role, Govers will oversee all aspects of the European business as well as the company's global automotive and aerospace strategy. Govers joined Aleris on June 20 and will report directly to Sean Stack, Aleris president and chief executive officer. Govers most recently served as general manager, Global Forms for SABIC, one of the world's leading petrochemical producers. In this capacity, he was leading a global business team focused on serving and innovating with customers in the automotive, aerospace and consumer electronics markets. Jack also previously served as general manager of SABIC's global sheet and film business, during which he also had...