
Aluminium alloy powder production for additive manufacturing is set to expand through a new technical cooperation agreement between CNPC Powder China Ltd and Xi’an Bright Laser Technologies Co Ltd (BLT). The agreement covers the production and international distribution of BLT-AlAM400, an aluminium alloy powder developed for applications in humanoid robotics, new energy vehicles (NEVs), aerospace and other industrial sectors. Under the agreement, BLT has authorised Shanghai-based CNPC Powder to manufacture BLT-AlAM400 on a contract basis in China and sell the powder internationally. CNPC Powder has also secured exclusive overseas agency rights, excluding BLT’s direct sales network and existing regional agents. With an annual powder production capacity of almost 10,000 tonnes, CNPC Powder...
BorgWarner has won its first commercial order for an electric motor developed with aluminium-wire hairpin winding technology. The US automotive supplier will provide the new eMotor to a major Chinese automaker for use in hybrid vehicles, bringing the technology into its first production application. The motor uses aluminium-wire hairpin winding technology and is designed for hybrid vehicles. Its applications include generator motors and traction motors for auxiliary drive systems, with production scheduled to begin in the fourth quarter of 2026. Explore AL Circle’s report ALuminium Wires & Cables - Insights & Forecast to 2030 for insights into aluminium applications, industry developments and opportunities across the electrical sector . Compared with conventional copper-wire motors with...
Grow with
AL Circle

The downstream aluminum industry, who are mostly the micro, small and medium enterprises (MSMEs), has urged Union Power Minister Piyush Goyal that the import of raw material should have no duty or rather minimum duty and maximum duty must be imposed on the import of finished aluminium products. In a letter to the Minister, the Aluminium Secondary Manufacturers Association (ASMA), highlighted the key points discussed during the meeting conducted by the Mines Ministry along with the industry representatives and other stakeholder on September 19. “Though no final decision could be taken in the meeting due to absence of consensus on various matters but the representatives who came with different data and documents submitted the same in the meeting and the undue and uncalled for demand of the...

More and more companies are slowly getting into the business of aluminium cans considering its infinite recycle values and growing demand. Malaysia's Kian Joo Can Factory Bhd has recently signed a Memorandum of Understanding (MoU) with Togo (HK) Industries Ltd (THKIL) in order to leverage upon Togo’s advanced manufacturing technology. They would collaborate to manufacture and distribute aluminium cans and bottles. Kian Joo confirmed in a filing with Bursa Malaysia yesterday that its wholly-owned unit, Singapore-incorporated KJ TOGO Pte Ltd, which would be the name of the new joint-venture company used by both the firms would venture into the manufacture and distribution of aluminium cans and bottles. “THKIL holds the licence to manufacture aluminium bottles by using advanced technology,”...

China Xingfa Aluminium, which on September 15 halted trading ahead of a takeover announcement, announced this morning shares would resume trading after it filed an announcement last night proposing the company’s privatisation. The director of the firm and that of it’s largest shareholder – a subsidiary of state-run investment firm Guangdong Guangxin Holdings – plan to offer a cancellation price of HK$3.70 per share, a premium of 24.58 per cent over the company’s most recent closing price on September 14, on which day shares jumped 7.61 per cent. Shares in the company jumped as much as 21.2 per cent in early trade in Hong Kong. The privatisation is pending approval from Guangdong’s state-owned assets regulator and other authorities, though given the pedigree of Xingfa’s largest shareholder...

According to a study by BOKU University, Europe can take specific measures to formalise the informal recycling of aluminium beverage cans. The findings were presented today at European Aluminium’s 2016 Packaging Seminar in Mallorca, Spain. The study was carried out by the Vienna-based Institute of Waste Management at BOKU University of Natural Resources and Life Sciences. Considerable amounts of used beverage cans are collected by waste-pickers, particularly in South-Eastern European countries like Romania, Greece and Hungary. The study estimates that each individual informal collector amasses an average of 1.6 kg of used beverage cans per day. Mr Raphael Thevenin, Chair of European Aluminium’s Packaging Group said, “Formally counting cans that are already collected informally is an easy...

Like every year, International Bauxite, Alumina & Aluminium Society (IBAAS) is inaugurating its 5th International symposium (IBAAS-2016) in Goa, India on September 26. The three day conference will host delegates from international and domestic aluminium industry at the venue from 26-28 September 2016. At this crucial juncture for the domestic and international aluminium industry when the growing demand for aluminium is opening up new avenues for aluminium makers and Asia is growing stronger in the upstream sector, the conference is expected to open up innovative ideas, technical solutions and highlight the changes in market dynamics. The title of this year’s IBAAS-2016 symposium is “Aluminium Industry-The Evolving Asia-Pacific Story”. The event will coincide with a one day theme...

Gränges 9th Technical Seminar, which is held in Nanjing, China, 22-23 September 2016, is focusing on innovations and new technologies for the heat exchanger industry. About 400 customers and other leading industry representatives are attending the seminar, making it the largest seminar of its kind in the world. “Gränges has been leading the development of new, innovative rolled products for heat exchangers since we started our operations in China 20 years ago. We offer the most technically advanced solutions and work closely with our customers in order to improve their processes and technologies”, said Gränges CEO Johan Menckel at his opening speech in Nanjing. “When looking at the next coming years, challenges with emissions, new powertrain solutions, and more digital content are factors...
.jpg)
Praxis has ventured into the mountain bike wheel segment with two aluminium and carbon wheels in partnership with DT Swiss. Praxis’s Adam Haverstock sounds very confident and positive about the new launch. “We were already strong in drivetrains, so this is a naturally progression,” “We’ve designed these to be as user friendly as they can possibly be, with easily sourced spoke replacements, overbuilt flanges and custom rim designs built for strength.” Both aluminium and a carbon wheel sets will soon to be available commercially. Currently they have supplied samples to distributors around the globe. The aluminium wheel set AL24, as the name suggests is the entry level offering at $699 and will come specced with a DT370 stock hub. The wheel will also have details on the rim such as a flat...

Foreign media recently reported that China exported large amounts of aluminum semis via Mexico to the US so as to evade US duties. However, the China Nonferrous Metals Industry Association (CNIA) said in a statement that the opinions are a distortion of facts. The CNIA added that the reports are aimed at moulding public opinion before the US International Trade Commission's hearing in Washington on September 29. The reports are absolutely groundless, Zhang Jianping, Director at the Department of International Economic Cooperation at the Institute for International Economic Research of NDRC, said.

A weaker US dollar from the US Fed’s decision not to raise interest rate will continue benefit LME aluminum, which will rise to USD 1,625-1,650/mt. SHFE 1611 aluminum will search for direction and move between RMB 12,350-12,500/mt. In east China’s spot aluminum market, spot premiums of RMB 580-620/mt are expected over SHFE 1610 aluminum contract.

AEROBAL, the International Organisation of Aluminium Aerosol Container Manufacturers has invited entries for this year’s best aluminium aerosol cans award. About 70 per cent of all aluminium aerosol can producers worldwide are members of AEROBAL. Packaging Europe's editor in chief, Tim Sykes and a number of other media biggies from well-known international packaging and can magazines would comprise the panel of judges. Commenting on the award, Gregor Spengler, Secretary General of AEROBAL says. “Our World Aluminium Aerosol Can Award is a truly global exhibition of our sector’s capabilities.” “The competition is not only a yardstick for the aluminium aerosol can’s high quality standard, it also serves as a pointer to trends in future developments. Moreover, it is a valuable indicator of...

Robert Nash, Chairman of Bauxite Resources Limited presented the YEAR IN REVIEW to the company shareholders. In the report he discussed the substantial changes the company went through the Financial Year ending 30 June 2016. The most significant change the company underwent was the agreement with the Yankuang Group to terminate the Bauxite Alumina Joint Venture (“BAJV”). The termination was achieved through the sale of the Company’s interests in the BAJV and in the Company’s neighbouring Fortuna tenements, to Yankuang for $7.15m together with a royalty on future sales of bauxite. Under the agreement, Yankuang also agreed to sell back its’ 8.5% shareholding in the Company for $1.15m (5.83 cents/share). Following final settlement with Yankuang in January 2016, the Company undertook a...

More and more new metal alloys are being developed every day to suit the needs of automakers, aerospace contractors, and other OEMs. They are stronger, harder, and can survive higher temperatures. The crystalline structures of the alloy are redesigned at the nanoscale and microscale to add these qualities. Two different companies, NanoSteel and NanoAl are developing different types of new steel and aluminum alloys using this technique. NanoSteel's proprietary nanostructured steel alloy materials include sheet metal, powder metals, and surface coatings. It serves applications in extreme industrial environments, and in the oil & gas, mining, and power industries, as well as automotive. Aluminium has been slowly substituting copper as a material of choice for wiring over the last two decades...

Art does not necessarily be delicate and soothing to the eyes. Even a bold and statement art pieces with unusual medium can be equally interesting and complement the delicate art perfectly. Catherine Bertulli is one such artist who is displaying her explosive sculptural canvases at the current exhibition at Grimshaw-Gudewicz Art Gallery on the campus of Bristol Community College. Her arts using aluminium foils dramatically attract viewers with its explicit use of colour and material. Bertulli’s uniqueness lies in the fact that she creates her own canvases before creating her art. She has evolved from her earlier figurative paintings to create very different art installations with an unusual medium like aluminium. In her current installation, she first treats industrial aluminium foil...

The Institute of Scrap Recycling Industries (ISRI), the Voice of the Recycling Industry, today released a call for entries for the 2017 Design for Recycling (DFR) Award. The DFR Award is ISRI’s highest award given annually to the most outstanding contribution to products designed with recycling in mind. It recognizes proactive steps made by manufacturers who have actively incorporated DFR principles into products and processes. “When designing a product, manufacturers should be giving just as much of a priority to the product’s ability to be recycled as manufacturers do cost, appearance, and other factors,” said Robin Wiener, president of ISRI. “Effective recycling begins at the drawing board. Through the Design for Recycling Award, ISRI is looking to reward companies, designers, and...

Oliver Hommel, Head of Product Area Foil BU Global Products Hydro Aluminium, has been elected President of the Global Aluminium Foil Roller Initiative (GLAFRI) at the organisation’s General Assembly held in Shanghai. GLAFRI is the global association coordinating actions on sustainability in order to support foil market growth and promote innovative developments. Almost 10% of annual global aluminium primary production is converted to aluminium foil. The initiative is happy to welcome new members and already represents 60 members from 28 countries. These companies account for about half of the global production of aluminium foil and thin strip below 200 microns. Following his appointment Mr Hommel said, “I am honoured to have been given the task to leading GLAFRI, together with my...

Getting the most up-to-date information on equipment is vital, and it often falls to the local jobbers and distributors to get that information out to the shops. Bertrand Supplies recently held a demo of new equipment at Tony Graham Collision Centre in Nepean, Ont. Staff from PBE Distributors came in to conduct the demonstrations. The event was attended by about 25 repairers representing 16 different local collision facilities. Demos were conducted by Bruce Murray, Craig Pierce, Dave Pereira and Chris Haldane of PBE Distributors. The products demonstrated were Pro Spot's aluminum welding station with pulse MIG welder and the PR-5 self-piercing rivet system, the Hot Box paintless dent repair system, the Rail Saver from TG Products and Wedge Clamp's Eclipse 3D measuring system. Marc...

Constellium N.V. announced today that it will supply aluminium Crash Management Systems and Automotive Body Sheets for the new PEUGEOT 3008, which will be presented to the public at the 2016 Paris Motor Show. The PEUGEOT 3008 is poised to take the compact SUV market by storm with its inspired design, optimized efficiency and a host of high-tech equipment features. Constellium will supply the aluminium front Crash Management System for the vehicle, including a lower beam for enhanced pedestrian safety. Constellium will also provide aluminium coils and sheets for the inner and outer hood panels and for the fenders. Aluminium is the ideal material for Crash Management Systems, providing superior energy absorption in order to protect vehicle occupants in the event of a collision. This crash...

Creditors allege in a court filings that the companies behind a planned aluminium plant in Pineville owe more than $2 million in unpaid loans and contracts. Revolution Aluminum LLC, which announced plans last year to build a $1.5 billion production complex that could employ more than 1,000 people, is being sued by Acadiana Railway for nearly $800,000 for unpaid work and uncollected fees. Also, a petition has been filed to force Revolution Aluminum Propco LLC, which purchased the property for the proposed complex, into bankruptcy to collect loans that have not been repaid. Revolution Aluminum Propco LLC is incorporated with Revolution Aluminum LLC as its manager. In the bankruptcy filing, three petitioners allege that Revolution Aluminum Propco LLC, which bought the former site of...