Calculate Embedded Emissions for Unwrought Aluminium (HS7601)

Enter your input

Payable emissions (tCO₂e/t)

Total CBAM Cost (€)

Notes:
There may be a difference when calculating the price with respect to import volume, carbon price, and benchmark emissions, as the embedded formula may result in minor variations due to decimal rounding. Therefore, the actual value may vary.

CBAM is applicable to trade volumes starting from 50 metric tonnes. For trade volumes below 50 metric tonnes, CBAM does not apply.

Usage Procedure – How to use the CBAM Calculator Sheet

Enter or update values only in the INPUT
PARAMETERS section (Highlighted in blue) , including
the carbon price, benchmark emissions, CBAM
chargeable percentage (as per the phase-in year),
and imported quantity.

The system will automatically calculate the payable
emissions and the total CBAM cost (€) based on the
inputs provided.

Notes:
• Change any input value to automatically update CBAM cost.
• Formula used: Carbon price × payable emissions × quantity.
• Model aligned with CBAM supplier-side illustrative methodology.

20 JULY 2020 AL CIRCLE

South32’s Hillside Aluminium production increased by 3,000 tonnes to a record 718,000 tonnes in FY20

EDITED BY : HEENA IQBAL 1MINS READ

South32 Ltd’s aluminium output stood at 986,000 tonnes in FY20, unchanged from last year. In June quarter, production was unchanged at 245,000 tonnes.

Hillside Aluminium saleable production increased by 3,000 to a record 718,000 tonnes in FY20 as the smelter continued to test its maximum technical capacity, despite the impact to production from increased load-shedding.

{alcircleadd}

aluminium

“Our priority remains keeping our people safe and well, maintaining reliable operations and supporting our communities through the COVID-19 pandemic. Despite the health crisis, we delivered a strong operating result, highlighted by annual production records at Brazil Alumina, Hillside Aluminium and Australia Manganese ore,” Graham Kerr, South32 CEO.

Mozal Aluminium saleable production increased by 1,000 tonnes to 268,000 tonnes in FY20 as the smelter continued to test its maximum technical capacity, despite the impact to production from increased load-shedding.

“In order to further improve the smelter’s cost competitiveness we continue to execute the AP3XLE energy efficiency project during FY20. The project is expected to deliver a circa 5% (or 10kt pa) increase in annual production by FY24 with no associated increase in power consumption.”

Tagged with: