
New Zealand-based aluminium beverage can manufacturer Recorp is weighing further production investment as it strengthens its presence in Australia. With its present operating facility in South Auckland, producing around 550 million aluminium cans annually, the company is exploring the possibility of opening a second production line as it looks to expand its customer base across the trans-Tasman market. Recorp entered the Australian industry in August 2026 with its 16,000-square-metre facility in Manukau, South Auckland. Operations at the plant commenced in November 2024, boosted by an investment of NZD 115 million (USD 62.89 million). Its current production line has the manufacturing bandwidth of up to 1,850 cans per minute, reinforced by eight bodymakers and two decorators. The equipment...
Australian bauxite producer VBX Limited has expanded the development scope of its Wuudagu bauxite project in Western Australia, following an updated Mineral Resource Estimate of 143.2 million tonnes and improved metallurgical recoveries. As a next step in the course, the company is assessing a mining and beneficiation rate of 8–9 million tonnes per annum (MTPA), up from 6 MTPA, as it advances the Definitive Feasibility Study (DFS). The update was provided by VBX’s Chairman George Lloyd in an address at its Annual General Meeting on November 20, 2026, accompanied by details of a completed AUD 4.5 million (USD 2.98 million) placement. Explore the production, demand and consumption forecasts of bauxite and alumina in our report: "Global Bauxite & Alumina Market Forecast to 2036:...
Grow with
AL Circle

Western world unwrought aluminium stocks rose to 1.573 million tonnes in May compared with a revised 1.537 million in April, industry data showed on Monday. Unwrought stocks stood at 1.303 million tonnes in May 2010, provisional data from International Aluminium Institute (IAI) figures showed. Total aluminium smelter stocks excluding finished endproducts rose to 2.656 million tonnes at the end of May 2011, versus a revised 2.591 million in April 2011 and 2.392 million tonnes in May 2010.

Western world unwrought aluminium stocks rose to 1.573 million tonnes in May compared with a revised 1.537 million in April, industry data showed on Monday. Unwrought stocks stood at 1.303 million tonnes in May 2010, provisional data from International Aluminium Institute (IAI) figures showed. Total aluminium smelter stocks excluding finished endproducts rose to 2.656 million tonnes at the end of May 2011, versus a revised 2.591 million in April 2011 and 2.392 million tonnes in May 2010.

State-run National Aluminium Co Ltd (NALCO), India's third-largest producer of aluminium, has decided to offer a discount of 2,000 rupees per tonne across all products, a week after cutting prices by 5,000 rupees per tonne. The company has not revised the basic prices, and has only offered a discount with immediate effect until June 30, a senior company official who did not wish to be named due to company policy told Reuters on Saturday. Both the moves were promoted by the changes in the London Metal Exchange (LME) rates, he added.

Sumitomo Chemical announced that it has planned to construct a new production line to increase the manufacturing capacity of high-purity alumina. The production capacity will be increased from 1,600 tons to 3,200 tons per year. The high-purity alumina is utilized as a raw material to produce sapphire substrates in LEDs. The 99.99% pure alumina is utilized as fillers for magnetic media and ceramic substrates and parts in semiconductor manufacturing devices and electronic components. It is also used as fillers to increase the thermal conductivity characteristic of composite resins. Currently, the demand for this material has been increasing for use in single-crystal sapphire, which is employed in LED substrates. The high-purity alumina is also used as coatings in lithium-ion secondary...

Can Manufacturers Institute reported that aluminum can recycling has reached its highest level in 10 years, at a rate of 58.1 percent, in its annual report from June 15. According to the report the energy savings is equivalent to 17 million barrels of crude oil or the amount of gasoline consumed in the United States in a two day period. Another advantage of recycling is that it cuts down on waste leading to less garbage in land fields. Heidi Logue, director of developmental training at CCAR industries, said a total of 127,264 pounds, an average of 42,421 pounds per month, in recyclables from Eastern was received between March and May. Ryan Siegle, campus energy and sustainability coordinator, said Eastern receives more than $20,000 a year from this effort and that it pays his student...

Jiangsu Alcha Aluminum (002160) filed it plans to issue 120 million shares for 12.69 yuan per share, raising as much as 1.5 billion yuan for an aluminum strip and foil factory with annual capacity of 250,000 tons, reports Shanghai Securities News. The project consists of casting, rolling, melting and casting lines, as well as a rolling facility and supplementary equipment, and wholly controlled subsidiary Baotou Alcha Northern Aluminum will manage it. The subsidiary was founded in 2011 with registered capital of 50 million yuan. Alcha’s latest project will require a construction period of 18 months and will add capacity of 100,000 tons of aluminum and aluminum alloy ingots, 100,000 tons of aluminum strip and 50,000 tons of air-conditioner foil. The aluminum alloy ingots and strip will be...

Sydney, June 28, 2011 (ABN Newswire) - Emerging bauxite exploration and development company, Australian Bauxite Limited (ASX:ABZ) has received laboratory results from drilling at its Guyra project in NSW. 63 holes intersected a thick layer of bauxite located beneath a thin clay horizon, including some exceptionally high grade, thick gibbsite bauxite, ideal as a "sweetener" to any bauxite refinery. Australian Bauxite CEO Ian Levy said; "This is our 2nd discovery of premium quality bauxite concealed under a thin clay layer. We hope to find a lot more. "We may be able to sell large tonnages to bauxite-alumina refineries needing "sweetener" bauxite that processes at low temperature and has very low reactive silica contents. "We've called this bauxite type "Brown Sugar" bauxite - sweet and...

US automobile production has rebounded from the global recession and the combination of more cars being made and tighter fuel efficiency standards will mean greater use of aluminum. Mr Lloyd O’Carroll senior vice president and metals equity analyst for Davenport & Company said that an aluminum industry analyst said that Automobile production in the US rose 38% in 2010 and is up another 11% year to date. Mr O Carroll said that the firm projects production to rebound 13% in 2011 and 10% in 2012. Along with more cars and light trucks being created, the weighted average of pounds of aluminum used per car is growing with 332 pounds used in 2010. That figure is estimated to grow to 337 pounds in 2011 and 342 pounds in 2012. For comparison in 2006, the aluminum weighted average was 316 pounds....

Alcoa Inc. (AA) the largest U.S. aluminum producer was awarded a $1 billion multiyear supply agreement with aerospace firm Airbus for aluminum sheet and plate products. As per the agreement, Alcoa’s products will be used in nearly all Airbus commercial aircraft programs including the fuselage panels, structural components and wing skins. Alcoa’s flat rolled products will be supplied from the company's plants in Davenport, Iowa, the United Kingdom and Russia. Earlier this month, Alcoa announced it had developed a new generation of alloys and technologies, which could lower the weight of airliners by up to 10% and improve fuel efficiency even more. Alcoa's new aluminum- or aluminum-lithium based alloys and advanced structural technologies use sheet, plate, forgings and hard alloy extrusion...

Until now, industry standard diecast enclosures would require additional machining and reworking in order to mount electronic or electrical components such as keypads, and accessories such as hinges, locks wall brackets, etc. The 'aluCASE' series includes these features as standard. For example, it is not necessary to machine the lid section to fit a membrane keypad or product label, a 2 mm recess is already provided. Also lid retaining straps are included to avoid the need to fit external hinges. However, should hinges be required, standard models pre-fitted with integrated hinges are available. External mounting brackets are no longer required as the enclosures can be mounted on a wall or machine while still assembled. There is no need to remove the lid, thus avoiding any possible...

Mubadala Development Company, a wholly owned investment vehicle of the government of Abu Dhabi and 1 Malaysia Development Bhd have announced that they will jointly establish USD 4.2 billion aluminum smelter in Sarawak of Malaysia. The JV partners will also bring in other investors to invest approximately USD 1.8 billion to develop aluminum related downstream industries including a rolling mill, a wire cabling facility, a wheel casting plant and up to 10 extrusion plants in the state. The new plant will have a production capacity of 750 kilo tonnes per year. The new development is expected to create over 40,000 jobs yield additional USD 3 billion MYR 9.05 billion to the gross domestic product and contribute MYR 7.8 billion to the country's trade balance. The agreement to build the smelter...

Noranda Aluminum Holding Corporation /quotes/zigman/511299/quotes/nls/nor NOR +2.93% will announce financial results for second quarter 2011 in a news release before the NYSE opens on July 27, 2011. Management will review those results during a conference call at 10:00 AM Eastern Time on July 27, 2011, followed by a question-and-answer period. The call will be broadcast over the Internet on the Company's homepage at www.NorandaAluminum.com and can be accessed under the link "Investor Relations." The call will be archived shortly after the conference call concludes and will be available for replay through August 3, 2011.

Aluminum inventories tracked by the London Metal Exchange dropped for a 23rd session, declining in warehouses around the world. Stockpiles of the lightweight metal fell 11,475 metric tons to 4.53 million tons, daily exchange figures showed. That was the lowest level since Feb. 4. Declines were registered in warehouses from Detroit to Singapore. Inventories are down 3.8 percent since rising to a record 4.71 million tons on May 18. Canceled warrants, or orders to draw aluminum from LME stocks, fell 11,475 tons to 461,725 tons. They jumped 71 percent in the four weeks through June 10 and reached the highest level since at least October 1997 on June 6. The increase was “the result of the breakdown in the profitability of the carry trade throughout May,” said Angus Staines, an analyst at UBS...

Reuters reported that more primary aluminum smelter projects must make their way onto the drawing board soon to avert a looming gulf between supply and demand around the end of the decade. Compounding the problem is the likely difficulty in opening new bauxite mines to feed those smelters due to the spread of resource nationalism and rising development costs. The prospect of supply shortages may seem remote with a current glut of stockpiled aluminum including the highly visible 4.5 million tonnes in London Metal Exchange warehouses. Analysts and producers forecast based on known smelter and mine projects said that yet a shortfall of some 13 million tonnes looms by 2020 as demand surges to 70.0 million tonnes. Demand this year is seen at around 45.0 million tonnes. Mr Steve Hodgson CEO of...

On Tuesday, June 28, President Barack Obama will visit Alcoa's Davenport, Iowa, facility where he will highlight the role of advanced manufacturing in US job creation and exports. Alcoa has developed 95% all aerospace alloys ever created. The visit comes on the heels of Alcoa's newest aviation breakthrough, third-generation aluminium lithium alloys that make planes lighter, corrosion resistant, and more cost effective to manufacture. “It is a true honor that President Obama has chosen to visit Alcoa in Davenport, a great example of the high technical capabilities and innovation that makes US manufacturing strong,” said Alcoa Chairman and CEO Klaus Kleinfeld. “We have more jobs in Davenport today than before the crisis as we capture growing global demand for innovative products. We welcome...

Rumors are increasing that the closed Century Aluminum plant in Ravenswood may be sold soon, an industry trade publication reported last week. However, at least one analyst says that, not only does a sale not make sense right now, but there's no good reason why the shuttered aluminum smelter shouldn't already be back up and running. Last week, a report by American Metals Market said speculation was mounting that the Ravenswood plant was on the auction block. The report cited several unnamed industry analysts who said the Monterey, Ca.-based company is looking to sell off some of its aging U.S. assets such as the Ravenswood plant, so long as the price was right. "I don't see why they wouldn't sell it — that's a company that I think wants to be Iceland-based and not U.S.-based," one unnamed...

Alcoa announced today it has been awarded a new multi-year supply deal by Airbus for aluminum sheet and plate products. The agreement was reached this week at the Paris Air Show between executives of the companies. Exact terms were not discussed, but the deal is worth about $1.0 billion over its duration. Alcoa has a potential upside of 31.1% based on a current price of $15.28 and an average consensus analyst price target of $20.03. This Business News video “Alcoa Announces Multi-Year Aluminum Deal With Airbus Worth $” is copyright by Financial News Network and brought to you by Gamut News. Feel free to share or embed this video but this video may not be broadcast, redistributed or rewritten in whole or part without express written permission. Gamut News is a leader in providing critical...

Engineering tutors and staff from Bahrain Polytechnic recently visited the Gulf Aluminium Rolling Mill Company (Garmco). This was the second time Garmco has hosted the Bahrain Polytechnic staff and afforded them the opportunity of seeing the plant in operation. The visit forms part of the Bahrain Polytechnic's policy of enhancing their relationship and cooperation with the industry keeping engineering tutors aware and up to date with the latest technologies used in the industry. Within every degree programme students and tutors at the Bahrain Polytechnic are required to involve themselves with the latest developments in different industries as part of their training and development programme to ensure their theoretical education is balanced with practical application. To this end, Bahrain...