
Rising aluminium prices are adding to manufacturing cost pressures at Hyundai Motor and Kia, as the prolonged Middle East conflict continues to disrupt supply chains and push up raw material expenses. Aluminium prices have reportedly increased by 26 per cent year on year, while higher copper and plastic costs are also weighing on the South Korean automakers' profitability. According to the companies' quarterly reports released on November 20, prices of key automotive raw materials have risen significantly compared with the previous year. Copper recorded the sharpest increase, climbing 35 per cent from USD 9,945 per tonne to USD 13,434 per tonne. Plastic prices rose 26 per cent, from USD 866 per tonne to USD 1,090 per tonne, while aluminium increased 26 per cent from its reported...
The US aluminum scrap market is showing signs of cooling as falling Midwest premium expectations and weaker primary aluminum prices put pressure on used beverage can (UBC) scrap values. The latest decline highlights how closely recycled aluminum pricing in the United States is tied to regional trade premiums, rather than movements on the London Metal Exchange (LME) alone. The LME's US UBC scrap contract, which settles against a mill-grade delivered price index, closed at $2,635.63 per metric ton on November 18, marking a daily decline of 0.66%. The downward movement reflects growing pressure across the US aluminum pricing structure, with both the underlying metal benchmark and regional premium losing momentum. US UBC scrap prices retreat as November weakness builds The latest movement...
Grow with
AL Circle

Aluminium extruded product shipments by North American producers totalled 264.7 million lb, or 120,067 tonnes, in August, up by 6.4% from 248.9 million lb in the same month last year, according to Aluminium Association data.

A rebound of LME aluminium from $2,155 per tonne is ending, to be followed by a drop towards $2,192. The wave "4" rebound has not violated a downtrend that started at the Sept 16 high of $2,403.75, as the metal is riding on a downward wave (3), which will complete a five-wave cycle, with the wave "5" to eventually drive the price down to $2,155, the wave "3" trough. A Fibonacci retracement on the fall from $2,340 to $2,155, coupled with a rising wedge pattern, indicate the rebound could be peaking around $2,248, the 50 percent level.

Traded prices of spot aluminum in Shanghai were between RMB 16,920-16,950/mt on September 29th, with premiums of RMB 200-220/mt over the SHFE current-month aluminum price. Low-iron aluminum was traded between RMB 16,980-17,020/mt. Traded prices of spot aluminum in Wuxi were between RMB 16,920-16,950/mt. After SHFE aluminum prices gapped over 2% lower, spot aluminum prices plunged in response. Since traders were gradually exiting the market, spot aluminum supply dropped significantly during the day. Meanwhile, due to low stock levels among traders, spot premiums held steady above RMB 200/mt. Downstream purchases were also quite limited, therefore transactions were rarely seen.

Market staged sparse transactions in the Guangdong spot aluminum market on Thursday, as market players generally stayed away from the market for the upcoming National Day Holiday. Spot aluminum prices in Guangdong dropped sharply by RMB 200/mt, with prices below RMB 16,900/mt. Mainstream transactions were traded at RMB 16,880-16,900/mt. Sparse deals were done before noon, and transactions were hardly seen in the afternoon.

The most active SHFE 1112 aluminum contract gapped over 2% lower at RMB 16,160/mt on September 29th due to reignited investor worries towards a default by Greece. The contract was pressed to an intraday low of RMB 16,020/mt by increased short selling during early trading hours, but rebounded later to hit RMB 16,570/mt with bargain hunting by the longs and profit-taking by the shorts. At the tail of trading, due to profit-taking by the longs, the most active contract slightly slipped to finally close at RMB 16,475/mt, down RMB 60/mt or 0.36% from previous trading day. Positions of the contract decreased 2,020 lots to 104,338 lots. With strong support at the RMB 16,000.mt mark, the most active SHFE aluminum contract rebounded to above the 5-day moving average during the day. As most longs...

Investors’ worries towards the European debt crisis soared again overnight due to divisions among European leaders on efforts to prevent Greece from bankruptcy . Later, the US Department of Commerce said August durable goods orders fell unexpectedly by 0.1% from July, which followed slips in previous two months, indicating severe challenges for a recovery in US industrial production. As a result, the US dollar index climbed during European trading hours as investors dashed to the safer US dollar. The index returned to above the 5-day moving average and finally closed at 78.147, up 0.49%. LME aluminum only hit USD 2,263/mt overnight as the strong US dollar eroded upward momentum of the metal. It later dropped to an intraday low of USD 2,198/mt due to increased short selling on weak US...

Three UK automotive companies achieved record output in 2010, despite the fragile economic situation. Nissan, Morgan and Rolls Royce (BMW) all posted record outputs that year from their respective UK plants, Professor Garel Rhys told the Aluminium in Automotive Conference, in Birmingham UK. Nissan produced 423,000 vehicles, Rolls Royce 3,215 vehicles and Morgan 700. Mr Rhys said that the Nissan figures were incredible and that no other UK carmaker had passed the 400,000 figure before. Prof Rhys said the figures prove the UK is still a major vehicle manufacturer in terms of what it can do. Its strengths are in the design of vehicles and their components and the range in vehicles it can produce, including cars, buses, vans systems and trucks but needs to improve its R&D and production of...

Says the existing free trade agreements have resulted in inverted tariff structures and adversely affected domestic manufacturers. India is on the verge of signing a Free Trade Agreement (FTA) with the European Union (EU), but a concerned auto component industry has started raising its voice against such agreements because they have adversely affected domestic manufacturers, dominated by small and medium enterprises (SMEs). According to the Automotive Component Manufacturers Association (Acma), the nodal agency for the Indian auto component industry, representing over 600 companies, most of the existing trade agreements have resulted in inverted tariff structures. “The issue is that the FTAs should not result in inverted tariff structures. Most FTAs that we have signed are with countries...

While the opportunity varies by application, aluminium is the clear winner in the game of substitution with copper and to a much lesser extent steel, likely to bear the largest brunt of aluminum's gain. While the market opportunity for aluminium as a replacement for steel is much larger than as a substitute for copper, the steel sector dwarfs the base metals in size and thus is unlikely to feel as great of a hit. Aluminium should make the most headway in the automotive industry as a replacement for both cabling and vehicle bodies. In our view, energy prices are the largest hindrance to aluminium when it comes to more environmentally friendly applications. Wind turbines, solar panels and hybrid cars are all likely to stick with copper for their wiring as efficient energy transfer is...

The Aluminium Association reported on Wednesday that demand for U.S. and Canadian aluminium products fell 1.6% in July from a year earlier, and slid 8.2 percent from June. Demand for U.S. and Canadian aluminium products, measured as shipments from domestic producers plus imports, fell by 1.6 percent in July from a year earlier, and slid 8.2 percent from June, an aluminium industry group said on Wednesday. For the year through July, however, aluminium shipments were up 6.0 percent, the report said. Total demand slipped to an estimated 1.676 billion lbs in July from 1.704 billion lbs in July 2010, and was lower than the 1.825 billion lbs shipped in June, according to the Aluminium Association's Aluminium Situation report. For the year through July, aluminium shipments increased to 12.317...

Cabinet has approved the Environment Management [Waste Disposal and Recycling] [Amendment] Regulations 2011, and the Environment Management [Container Deposit] Regulations 2011. The Regulations provide the legal framework for the establishment of the Container Deposit and Refund Recycling System. Cabinet based its decision on a submission by the Minister for Local Government, Urban Development, Housing and Environment, Colonel Samuela Saumatua. The Minister explained that Fiji consumes some 50 million containers of beverage per annum, and few of these containers are recycled and many (millions) are discarded improperly. “Large quantities of used beverage containers end up as litter on streets, in waterways and beaches. Many containers flow out to sea harming our marine life.” He said that...

Retail discounts will be offered to residents recycling bottles and cans under a new scheme. Being launched by a private company by year end, this will award people one point for every plastic bottle or aluminium can they chuck into Reverse Vending Machines (RVM). The RVMs will print a receipt of the points - essentially a voucher or coupon - that can be availed of at businesses in Dubai, Abu Dhabi and Sharjah. Over 100 such machines will be set up in malls, residential communities, schools and other "high-traffic" locations in the emirates. Each of these machines can accept about 500 units. A billion beverage containers are thrown away in the UAE every year, but only about a third is recycled, he added. The rest end up in landfills, where they will clog up space for decades.

UK secondary aluminium ingot fell on Wednesday as falling primary prices on the London Metal Exchange saw raw material prices dip, and the weak euro kept business into the continent uncompetitive. LM24 pressure diecasting ingot fell to £1,580-1,670 ($2,465-2,605) per tonne from £1,610-1,680 previously, while LM6/LM25 gravity diecasting ingot slipped to £1,880-1,960 per tonne from £1,900-1,970 per tonne. “We’re seeing some slowing down in some areas, some rescheduling, and prices have come down,” a producer said.

Australia-listed Atlantic Limited said Thursday it has signed an agreement with Vietnam targeting an integrated bauxite "mine-rail-port" supply chain project in the country's Central Highlands. Under the agreement, signed with the Institute of Mining Science & Metallurgy under the Vietnamese Ministry of Industry and Trade, or MoIT, a development study would be carried out to "assess the mine-rail-port proposal submitted by Atlantic to local and national authorities, and which formed the basis of Atlantic's submission to the MoIT for consideration in the rewrite of the national master-plan for the industry," Atlantic said in a statement. The study would be a precursor to a full feasibility study and the forming of a joint venture to develop and obtain the necessary approvals for the...

QAL alumina refinery has for some time been has been trialling biodiesel as a supplementary fuel source for start up and operation of its coal-fired boilers. Biodiesel is stored in tanks on site and pumped into the boilers where it is distributed into injectors where the biodiesel is ignited to provide energy for the creation of high pressure steam. QAL buys the biodiesel from National Biodiesel Limited. QAL Health, Safety, Environment and Communities manager Ross Greenhalgh told The Observer the refinery was motivated to trial the new method for environmental reasons. "QAL commenced trial use of biodiesel in December 2010 for the purpose of investigating different fuel options to suppplement coal feed and to reduce sulphur dioxide and carbon dioxide emissions," Mr Greenhalgh said. "QAL...

Ormet Corp. CEO Michael Tanchuk announced the company's milestone of reaching full employment of 250 jobs just four months after announcing plans to reopen a dormant alumina refinery on the Mississippi River in Ascension Parish. At roughly 330,000 square feet, the Ormet facility had remained silent for more than four years. In May, Ormet announced it would hire 250 people and invest $21 million to renovate the refinery. Production now is scheduled to start the first week of October, and shipments of the primary raw material, bauxite, already are arriving.

MT Alumet, one of Thailand's leading manufacturers of aluminium extrusions, is beefing up its domestic and global expansion and is set to diversify into mining and drinking water in Laos. Executive director Jainnisa Kuvinichkul says the Thai-owned company is investing 200 million baht to raise production capacity at its Bang Na factory to 2,000 tonnes of aluminium a month from the current 1,500 tonnes a month. Upon completion next year, the expansion should help raise the company's international sales to 30% from 20% now. Founded in 1992 by the Kuvinichkul family, MT Alumet is ranked among the top three players in the high-tech aluminium market. The company supplies aluminium to all industries, including electronics, automobiles, aerospace, interior design and furniture. Thailand's...

Two of India’s largest family-run groups plan to invest billion of dollars around the globe as they seek to boost revenues by expanding in fast-growing emerging markets and by acquiring distressed assets of companies based in developed markets. Aditya Birla Group, India’s aluminium-to-retail and mobile telephony conglomerate, plans investments of $17bn across its 33 companies aimed at almost doubling the group’s revenues to $65bn by 2015. The 44-year-old Mr Birla said the majority of the investment – about $10bn – would go to developing greenfield projects at its aluminium companies among others, needed to meet the nation’s rising demand for construction materials for nascent infrastructure projects.