
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

A warehouse company owned by commodity trader Glencore (GLEN.L) is rapidly expanding its lucrative storage facilities at a Dutch port that has become a hub for storing aluminium, a metal increasingly used by bankers and traders as a financing tool. The move in warehousing comes as banks and trading houses face increased scrutiny for speculating on commodity prices while at the same time owning sheds that store a fundamental driver of price - metal stocks. "Really a lot of warehouses have been added in one year. The biggest expansion is in aluminium (but) steel has also been growing a lot," Marcel Pater, commercial manager at Zeeland Seaports, which operates the Dutch ports of Vlissingen and Terneuzen, said in an interview. He confirmed the new sheds were registered with the London Metal...

The US aluminum market is expected to see strong demand across most segments and even the long-suffering building and construction sector should pick up this year, according to Tom Brackmann, chairman and president of sheet maker Nichols Aluminum, said Wednesday. "There's got to be a pent-up demand for housing units," Brackmann said late Tuesday at a press roundtable at the Aluminum Association's spring meeting in Napa, California. The event was made available by teleconference. He said the US has seen real economic growth and it is only a matter of time before the construction industry comes back. Once there is confidence in the housing market and confidence that people will be able to find jobs and keep them, the market will see some pick up, he said. "I don't know that we are ready to...

The government of Ukraine has seized the only alumina plant in the country from nominal owner Rusal the world's biggest aluminum producer but while Rusal is fighting to regain control of the smelter, the only impact this could have on the company's rivals is negative. The Zaporozhye Alumina and Aluminium Complex goes back to the 1930s and even with a hydroelectric plant attached to it is extremely inefficient when it comes to power usage. Rusal used to crush bauxite into about 227,000 tonnes of alumina a year at the plant then further refine it into 113,000 tonnes of pure aluminum. However, demand for aluminum cratered in the 2008 recession taking prices all the way from USD 3,000 per tonne to barely USD 1,300. Given those fundamentals, Rusal shut the plant down and left it empty ever...

Employees at UC RUSAL's Friguia alumina refinery in Guinea have gone on strike, paralysing operations there, a union member and two other employees told Reuters, but the company said production losses would be "insignificant". Kabinet Barry, a spokesman for the worker's union, said their demands included a minimum wage of $400 per month and the payment of the employees' medical costs. Two RUSAL employees said the strike had shut down operations at the 630,000-tonnes-per-year plant, the only refinery in Guinea, the world's No. 1 exporter of bauxite. A RUSAL statement sent to Reuters confirmed the strike at Friguia but said it was "illegal". "The Company undertakes all necessary actions to end the strike as soon as possible," the RUSAL statement said. "It is expected that the possible...

It will be Evanston’s sixth year participating in the Cans for Cash City Recycling Challenge, Mayor Elizabeth Tisdahl announced Friday. Tisdahl also dubbed April “Evanston CAN Recycle!” month. The purpose of the national program is to promote recycling aluminum cans. The structure of the contest is simple: Residents continue recycling aluminum cans as usual, and at the end of the month, the city will tally the total number of cans received. “People just continue doing the great job that we’re doing recycling,” said Jim Maiworm, Evanston’s superintendent of streets and sanitation. Cities can win cash prizes for having the most cans collected in relation to population or having the most innovative and creative ideas. In each category, the first place city earns $25,000, the second place...

Norway: Following a decade of study and the invention of a specialised piece of equipment, the Norwegian Foundation for Scientific and Industrial Research (SINTEF) is close to the moment of truth for a recycling method for impure aluminium. At the centre of its work is a four-metre-long piece of equipment containing 40 heating elements which offers a new type of refining procedure. Molten contaminated aluminium is poured into the top of this custom-built apparatus and then passes through a horizontal channel. Meanwhile, a graphite-based rotating screw balances the solidified crystals, thus forcing the pure aluminium upwards to the hottest point, whereas the impurities remain in the cooler portion. As a result, pure aluminium is allowed to exit the machine’s two outlets. One of the SINTEF...

SAF (Southern Aluminum Finishing Co., Inc.) announces a full line of panel extrusions commonly used to hang, join and secure rainscreen panels for curtainwall applications. SAF Panel extrusions work with the company’s panel wall systems, or may be ordered stock length and finished to meet customer specifications. Detailed drawings for SAF’s panel systems, including extrusions can be viewed at http://www.saf.com/panels The company’s panel extrusions are part of the more than 200 other extrusions SAF stocks for ready availability. SAF has no minimum order requirement, and small orders are normally shipped next day. Free shipping applies to any extrusion order over 100 lbs. Based in Atlanta, Georgia, SAF (Southern Aluminum Finishing Co., Inc.) is a nation-wide aluminum extrusions and sheet...

Cubitek has announced a new ICE Series of aluminum chassis that will feature five different models ranging from Mini ICE for mini ITX motherboards all the way to HPTX ICE chassis that supports HPTX form factor motherboards. The entire new ICE Series features an anti-vibration design with sturdy aluminum frame, thick rubber rings for HDD mounting and vibration reducing side panels with rubber strips. In addition to the 200mm front (available on every model), 140mm top and 120mm back fans, the all aluminum design also helps with efficient thermal cooling. To make things even sweeter, Cubitek also threw in a large MB tray cut-out for easier CPU cooler mounting as well as 19mm wide space behind motherboard tray with U-shaped clips for easy cable management. All five models also feature the...

Aluminum posted its sixth straight session of losses. The tone turned negative early in Wednesday's London Metal Exchange session following the release of Federal Open Market Committee minutes late Tuesday that removed hopes of imminent U.S. monetary easing, Triland Metals says. "However the mood worsened in the afternoon following what was seen as a weak Spanish auction that ended up increasing the yields in most of southern European economies, a fresh blow for the euro," Triland says. "Even fair ADP job numbers from the U.S. did little…Activity could well pick up tomorrow as many will be looking to square their position ahead of the long (Easter) weekend. " LME three-months aluminum closed down $32 to $2,087.50 an ounce. LME copper, nickel, zinc, Lead and Tin also finished lower.

Matt Aboud, Tony Farraj & Tom Walpole Will Join the Association's Board of Directors The Aluminum Association elected three new members to its Board of Directors. Matt Aboud, Vice-President and Managing Director of Hydro Aluminum's Metal Markets in North America, Anthony Farraj, Commercial Vice-President of Global Packaging for Alcoa Global Rolled Products and Tom Walpole, Senior Vice-President of Novelis and President of Novelis North America will join the Association's Board of Directors. "Matt, Tony and Tom have diverse experience and expertise in critical areas of the U.S., North American and global aluminum industry," said Tom Brackmann, President of Nichols Aluminum and Chairman of the Aluminum Association's Board of Directors. "They will be a vital part of leading the Association...

United Co. Rusal (486)’s Chairman Barry Cheung, whose predecessor quit citing a “deep crisis” at the company, said the world’s biggest aluminum producer would study selling its stake in OAO GMK Norilsk Nickel at the right price. The departure of the billionaire former Chairman Victor Vekselberg, who wanted Rusal to sell its 25 percent holding in Norilsk, wouldn’t have a negative effect on the company, Cheung, who joined Rusal as a non-executive director in 2009 and took over as non-executive chairman on March 16, said in Hong Kong. “It’s a long-term strategic investment,” the new chairman said in an interview yesterday. “That’s not to say the stake is never for sale. If the price is sufficiently attractive, the board has the obligation to look at it.” Proposals by Vekselberg, a Rusal...

The National Aluminium Company Ltd. (Nalco) achieved the highest-ever bauxite production of 50.03 lakh tonnes in 2011-12, against the previous best of 48.79 lakh tonnes in 2009-10. The alumina refinery of the company produced 16.87 lakh tonnes of alumina hydrate. However, during the year, the metal production of the company slumped marginally from 4.44 lakh tonnes to 4.13 lakh tonnes. Nalco CMD B L Bagra said: "Besides coal shortage, the dwindling LME prices of metal, forced the company to cut down its production of metal to some extent." Nalso also recorded 415,916 tonnes of cast metal sale, against 438,952 tonnes the previous year. Moreover, the company achieved the alumina hydrate sale of 842,396 tonnes, against 681,917 in 2010-11. Aluminium export by the company stood at 98,399 tonnes...

Having sold large volumes of aluminum into China at the end of last year, Rio Tinto Alcan is now struggling to find metal to supply customers on a spot basis and is exacerbating a short-term squeeze in the Asian market, industry sources told Dow Jones Newswires Tuesday. The aluminum producer, a unit of U.K.-listed miner Rio Tinto PLC RIO -1.85% and one of the world's largest producers of the light metal, is fully covered on its long-term contracts but has no additional metal to offer to the spot market, traders and suppliers said. The absence of metal from such a large producer is helping drive premiums for physical delivery in Asia higher amid already tight supply, they added. Rio targeted China in the fourth quarter when the arbitrage window between the London Metal Exchange and the...

Century Aluminum Company (NASDAQ: CENX - News) will report first quarter 2012 earnings on Wednesday, April 25th after the close of market trading. The news release will be issued through Marketwire. The company will hold a follow-up conference call on Wednesday, April 25th at 5:00 p.m. Eastern time. The earnings call will be webcast live on the Century Aluminum Company website, located at www.centuryaluminum.com. Plan to begin the registration process at least 10 minutes before the live call is scheduled to begin. A replay of the webcast will be archived and available for replay approximately two hours following the live call. Contact: Shelly Harrison (investors) 831-642-9357 Lindsey Berryhill (media) 831-642-9364

Rio Tinto struggling to find spot parcels of aluminum for Asian customers, market participants say -Shortfall comes after Rio targeted Asia during fourth quarter amid positive arbitrage -Tight spot market helps push premiums up, especially in Japan By Clementine Wallop Of DOW JONES NEWSWIRES SINGAPORE (Dow Jones)--Having sold large volumes of aluminum into China at the end of last year, Rio Tinto Alcan is now struggling to find metal to supply customers on a spot basis and is exacerbating a short-term squeeze in the Asian market, industry sources told Dow Jones Newswires Tuesday. The aluminum producer, a unit of U.K.-listed miner Rio Tinto PLC (RIO) and one of the world's largest producers of the light metal, is fully covered on its long-term contracts but has no additional metal to offer...

Aluminium plunged to 6-weeks low at MCX extending the weekly losses and stood near to the major support level of Rs 107.7 per kg. Huge short selling with 36% rise in its open interest to 4833 lots hammered the metal at domestic bourses MCX. Aluminium shed by 0.5% or Rs 0.55 to Rs 107.8 per kg with its high at Rs 108.75 per kg and low at Rs 107.7 per kg on Monday, 2nd April. Aluminium April contract stood below 9-day EMA with its RSI in oversold region at 18.8. At LME, Aluminium shed for the third consecutive day by 0.9% at $2121 per tonne on Monday. The huge rise in aluminium inventories that stood at 5076,925 tonnes, up 13575 tonnes led the metal to slump to its further lows. But, the recovery signals from China and US in its manufacturing activity pared huge losses in the metal....

Morris Technologies, Inc. (MTI), the global leader in additive metal manufacturing, now offers Aluminum 6061 for use on their EOS direct metal laser sintering (DMLS) machines. Aluminum 6061 is a general purpose alloy, and sees wide application in aerospace, transportation, consumer products, medical, and other industries. It demonstrates properties superior to casting aluminums. In development at MTI since January 2011, Aluminum 6061 was released with full T6 heat treatment properties in late March 2012. This material is precipitation hardened and heat treated to exceed the minimum requirement of the AMS standards for 6061-T6. It is comparable to typical commercial wrought properties. A material data sheet for 6061 is available at www.morristech.com. The introduction of Aluminum 6061-T6...

Nalco is poised to clinch a crucial deal for bauxite sourcing from Gujarat. Its negotiations with Gujarat Minerals Development Corporation (GMDC) reached the “final stage”, the CMD of Nalco, Mr B.L. Bagra, told Business Line. The GMDC board recently approved the arrangement for sourcing through a joint venture with Nalco. The public sector unit is to set up a smelter and a 10-lakh-tonne a year alumina refinery at an estimated cost of Rs 4,600 crore in Kutch district. The project, however, is conditional on availability of local bauxite. GMDC will have a minority stake in the project. “But the quantum of holding is yet to be decided,” he said. On March 29, the corporation recommended the proposal to the State Government. The State Government's final approval was expected for the agreement...