
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Kazakhstan's aluminium exports to the European Union (EU) reached 110,184 tonnes in 2025, generating EUR 274 million in revenue, according to the country's Ministry of Trade and Integration. The EU's share of Kazakhstan's total aluminium exports rose sharply from approximately 6 per cent to 54 per cent, highlighting the growing importance of the European market for the country's aluminium industry. However, the introduction of the European Union's Carbon Border Adjustment Mechanism (CBAM) is bringing new compliance requirements for Kazakh exporters, with carbon accounting, emissions verification and production modernisation emerging as key areas of focus. These challenges were discussed during a session held in Antalya, Türkiye, alongside the 31st Conference of the Parties to the UN...
Grow with
AL Circle

A battle over a $1 billion stake in RUSAL, the world's top aluminium producer, comes to London next week, as two billionaire magnates go head-to-head in one of the largest ever commercial disputes to be fought in a British court. The trial begins in the High Court on Monday, offering a window into the chaotic, sometimes lawless and frequently violent privatisation and consolidation of Russia's aluminium sector after the collapse of the Soviet Union, a period known as the "aluminium wars". The case has been brought by businessman Michael Cherney, who first filed the claim in 2006, against Oleg Deripaska, RUSAL's chief executive and its largest shareholder. Cherney alleges he and Deripaska were business partners, after he met a young Deripaska in the early 1990s, spotted his acumen and...

Rio Tinto's aluminium smelter at Bluff turned in an operating loss before revaluations of financial instruments of $19.56 million for the year to December 31, close to the previous year's losses despite a 7.2 per cent lift in total revenues to $704.33 million. That increase wasn't enough to offset $712.34 million of expenses at the Tiwai Point smelter, which is New Zealand's largest single user of electricity and is up for sale by its Canada-based majority owners, Rio Tinto, who are looking to sell a suite of 13 older refineries in Australasia, the US, and Europe. The company also confirmed it stopped production at its fourth pot-line in April, reflecting the strong New Zealand dollar, volatile wholesale electricity prices, and the downturn in global metal prices. The fourth pot-line...

Chinese primary aluminium production in May totalled 1,678.4Kt, up 9.7% from the previous month and equating to an annual rate of 19.76Mt. The increase reflects a rise in production in the Guangxi region. Local smelters have re-started pot lines that have idled since the end of 2011 because of power supply difficulties. The Guangxi government has since granted smelters preferential power tariffs to boost economic growth. As a result, it is estimated that nearly 300Kt/yr has been re-started in the region. Yinhai Aluminium accounts for 240Kt of Guangxi’s increased production from two smelters in the area. Chalco Guangxi Co is responsible for an additional 30Kt/yr. Aluminium production in Yunnan and Guizhou provinces have also risen following an easing of power tariffs. Output at Yunnan rose...

Modernisation of Rio Tinto Alcan’s Kitimat aluminium smelter in British Columbia, Canada, is scheduled for completion in the third quarter of 2014. The slow-moving US$3Bn project, which was started in 2011, received a capital injection of US$2.7Bn last Christmas. Work so far has included the demolition of pot lines seven and eight, the relocation of some of the plant’s facillities – to enable the existing smelter to operate during the modernisation programme – and the construction of a 3Km underground utilities corridor. An anode pellets storage facility and a phase-one, 440-bed residential village for construction workers have also been completed.

Aluminum production is tilting toward the Persian Gulf and industry giants Rio Tinto (RIO), Alcoa Inc. (AA) and Norsk Hydro ASA (NHY.OS) are betting heavily that the region can produce aluminum more cheaply and can grab global market share. The rush to lower production costs is intense. The aluminum market currently is so oversupplied that market participants say half of the world's production is unprofitable at current prices. Producers and state-owned companies hope Persian Gulf production can take advantage of low energy costs locally and lower shipping rates globally. Such a shift comes at the cost of more costly aluminum smelters in Europe and America. Mideast output is expected to grow from 3.6 million metric tons in 2011 to 5 million metric tons by 2015 once new projects in Abu...

Aluminium Bahrain's output edged up 1.7 percent in the first half of 2012 but sales were almost flat as weak economic growth in Europe dampened demand in the first quarter, Alba said on Sunday. Production at one of the world's largest aluminium smelters was 443,533 tonnes in the first half of the year, against 436,256 tonnes in the same period of 2011, a company statement said. Sales edged up to 446,044 tonnes versus 445,370 tonnes in the first half of 2011. "Our sales and production figures reflect the company's operational focus on delivering progress while facing challenges," Chief Executive Laurent Schmitt said, pointing to a fall in aluminium prices and weak economic growth in Europe. Bahrain's state-run energy supplier raised Alba's gas supply costs by $0.75 per million British...

Hindalco Industries, part of the Aditya Birla Group, is in the process of seeking funding for its biggest greenfield aluminium project in the east coast state of Odisha in India. The company had planned to build a 0.36Mt aluminium smelter alongside a 1Mt alumina refinery, but is now planning a 0.72Mt smelter in direct competition with rival Vedanta Aluminium. Vedanta operates a 0.5Mt smelter and a 1Mt alumina refinery in the region. Hindalco’s strategy is to dominate the primary aluminium industry through its Indian operations.

China's provincial governments are propping a quarter of domestic aluminium production through power subsidies despite soft global demand, consultancy AZ China said on Friday. "These subsidies play a huge part in turning loss-making operations into profitable centres...The number of plants under water shrinks to just a handful," Paul Adkins, managing director of the Beijing-based aluminium consultancy said in a report. AZ China said five Chinese provinces are now subsidizing power costs for aluminium smelters with more than five million tonnes of China's operating capacity receiving up to RMB0.1/KWH in assistance. Another two million tonnes of capacity receives seasonal power price cuts, as the wet season provides more water for hydro schemes, especially in China's southwest, it said....

Vedanta may not revise its Rs 17,000-crore offer to buy the government's stake in Hindustan Zinc (HZL) and Bharat Aluminium Company (BALCO) adding that the valuation was concluded as per the agreement signed at the time of acquiring majority stakes in the two firms. Vedanta chairman Agarwal also criticised the government for going slow on the divestment process. "It is not the question of more or less... the government has asked us to give a proposal and on the basis of agreement, we have given the proposal in the interest of the industry. We believe that this is a fair proposal...," Vedanta group chairman Anil Agarwal told CNBC-TV18 after meeting Planning Commission deputy chairman Montek Singh Ahluwalia. "It's not a question of to consider or reconsider. It’s laid down (in the...

Hydro Aluminum will put aluminum in the spotlight at its Intersolar North America exhibition stand, booth 9129. The company says many of the technical qualities of the light metal are relevant for a range of applications linked to the solar industry, making aluminum highly competitive in comparison with other metals and other materials. Hydro is a provider of extruded aluminum solutions in North America, including supply sourcing, extrusion, finishing and fabrication of components, as well as contract manufacturing services, for a variety of industries, such as solar. Hydro’s precision-extruded aluminum framing systems are being utilized at the largest concentrated photovoltaic (CPV) solar facility in Latin America, in Durango, Mexico. Extruded aluminum offers efficient material...

VHE of Iceland supplys a complete range of equipment to ensure the lowest possible electrical resistance in the sealed anode and provide assured mechanical strength. The VHE semi-automatic casting machine relieves the operator of the repetitive parts of the casting process, while providing manual control over the potentially hazardous operation of pouring molten metal. The casting machine runs on rail tracks or may be suspended from an overhead gantry. The ladle is lifted up two vertically mounted curved guide-rails, and is tilted to the pouring position with absolute stability. The operator, sitting in an air-conditioned cab attached to the machine, has an unobstructed view of the casting operation from a position which remains constant relative to the pouring spout. Automation is...

Despite the current sluggishness in the non-ferrous metals markets, India’s Aditya Birla Group has some pretty big plans for the aluminum and copper sectors. To begin with, the Group’s flagship company, Hindalco, also India’s largest non-ferrous metals producer, has made some headway by raising funds for its biggest greenfield project so far. The Aditya Alumina and Aluminum project in the Indian State of Odisha, seeks to raise approximately US $1.65 billion to compete with other majors in this field, particularly Vedanta. While Hindalco, a Fortune 500 company, goes about its expansion plans, its subsidiary, Novelis, a global leader in aluminum rolled products and aluminum cans recycling, has also announced massive investments plans worth US $ 1 billion to mark its presence in growth...

Aluminum product developer Constellium is increasing the percentage of recycled metal in the aircraft parts it produces, as it vies to lower the cost and environmental impact of using metals and to prove that composites are not the answer to everything. The French group’s latest Airware technology is now at the production stage for new airliner programs such as the Airbus A350 XWB and the Bombardier CSeries. The value of alloys has grown with the addition of elements such as copper, silver and lithium. This has prompted Constellium to recycle more offcuts from machined work. “Last year, 77 percent of the aluminum alloys we produced for aerospace applications were coming from recycling,” said Bruno Chenal, director of technology and innovation, during a recent visit to Constellium’s...

Odisha’s proposed Special Economic Zone (SEZ) policy, aimed at attracting investors in non-metallurgical sectors has hit the wall of uncertainty. Though the draft of the policy was framed two years back, it has hardly moved ahead. Sources said, the finance department was not keen on doling out tax sops and incentives in line with the prevailing SEZ policy of the Government of India and this has presumably delayed any progress on policy making. “The finance department is of the view that only incentives incorporated in the Industrial Policy Resolution (IPR)-2007 should be extended to the SEZs. The department of finance fears revenue loss if tax sops are offered to such zones. But there is no way we can frame any state specific SEZ policy without including a set of exclusive incentives,”...

More than three years on and a $4.3 billion project to build a bauxite mining and alumina refinery in Cameroon is still waiting for a mining permit, a company executive said on Friday. India's Hindalco, Dubai Aluminium Company (Dubal) and Hydromine Inc announced plans for their Cameroon Alumina Ltd (CAL) joint venture in 2008. The project plans to tap bauxite reserves at Minim-Martap and Ngaoundal deposits in the Adamawa region of northern Cameroon. "The kick-off of our project is so far delayed because we don't yet have a mining permit," CAL Deputy General Manager Joel Sinquin, told Reuters in an interview. "We are pushing negotiations with the government and our hope is to be granted the licence as soon as possible, maybe before the end of this year or early next year." CAL had aimed to...

The monthly Construction MMI registered a value of 91 in July, down two from June’s reading of 93. Every component within the Construction MMI fell this past month with the exception of two – Chinese aluminum bar and 62% Australian iron ore fines destined for China. “Nearly all of the components comprising the Construction MMI fell, some only slightly however, which tells us that the global construction industry remains somewhat challenged within the current global economic environment,” said Lisa Reisman Managing Editor of MetalMiner. Chinese 62% Australian iron ore fines crept up a few dollars per dry metric ton as did Chinese aluminum bar prices. The price of US shredded scrap closed the month down 13 percent. For the second month in a row, the weekly US Midwest bar fuel surcharge...

Mayor Sal Garza and Aluminum Castings President Bret Markum agreed Monday to work together to reduce emissions that will stem from an increase in the company’s manufacturing output. The City Council approved an ordinance Monday that would rezone the company’s property to allow for heavy industrial work as the company plans to expand its facilities and production at 340 S. Kellogg St. Some council members and citizens said allowing for an increase in manufacturing could potentially harm children who frequent day care centers near the company, and that smells emanating from the manufacturer could deter people from patronizing downtown businesses, located just blocks away from Aluminum Castings. The council approved the ordinance by a vote of 5-2; Garza then cast a vote “reflecting the...

As the auto industry is striding towards lightweight technology, transmission products of automobiles are also stepping into lightweight stage. New transmission products developed by Fast possess obvious advantages in quality performance, energy conservation and environmental protection. In order to promote assembly parts’ lightweight, Fast has imported 2700T and 600T aluminium alloy production lines for Italy and expendable pattern casting automatic line from US. These lines have been put into bulk production and will lay stronger foundation for lightweight transmission in automotive industry.