
The United Arab Emirates (UAE) is set to give aluminium a second life as Dubai is preparing to introduce mandatory material passports for aluminium, steel and cement from 2027. The step is expected to construction materials under a harmonised tracking system, to reinforce recycling, reuse and a circular economy. The initiative aims to lead the emirate's construction industry away from the conventional use-and-disposal model by extending the life cycle of materials recovered from demolished buildings. Dubai Municipality announced the Building Materials Passport initiative at Dubai Future Week 2026. Under the theme 'For the Future Human', the event brings together more than 10,000 participants, including experts, decision-makers, policymakers and innovators. The material passport system is...
Emirates Global Aluminium (EGA) has reached another milestone in its North American recycling expansion, with new billet-making equipment arriving at its EGA Spectro Alloys facility in Rosemount, Minnesota. The investment is expected to add approximately 34,900 tonnes of annual recycled aluminum billet production capacity once the equipment becomes operational. The expansion forms the second phase of EGA Spectro Alloys' investment in recycled-content aluminum production. It includes a new scrap-melting furnace equipped with automated charging, stirring, and skimming systems, alongside a homogenizer designed to support billet production. The new equipment is expected to become operational by the end of next year. Once commissioned, it will increase the company's annual recycled aluminum...
Grow with
AL Circle

Rio Tinto has reported that its production from Rio Tinto Alcan refinery has increased by 14 percent to 594000 tonnes in Q1 13 from Q1 12. The rise was on account of resolution of lockout at Alma and power outage at Shawinigan. When compared to fourth quarter ending previous year the production was up by 1 percent. Meanwhile, production of Aluminium in Pacific mine was 313000 tonnes, down 6 percent from last year and 2 percent from the fourth quarter ending previous year. Rio Tinto announced that Pacific Aluminium's Gove alumina refinery would continue operating as planning, approvals and delivery of the gas to Gove project progresses. This decision followed a commitment from the Northern Territory Government to release a portion of its contracted gas for on-sale to Gove. A number of...

Even though aluminium is perhaps the largest power-consuming industry, Qatar Aluminium Limited is doing whatever possible through the available solutions and technologies to minimise the damage to the environment in the country. Speaking to this newspaper at the company’s pavilion at the Qatar Petroleum Environment Fair at the Doha Exhibitions Center, Qatalum CEO Tom Petter Johansen said the state of art plant in Mesaieed and its extensively superior applications and technologies in production have ensured that the local environment remains protected up to a large extent. Aluminium, he said, has been in production in different parts of the world since the 1880s and more than 75% of the metal that was produced in the initial years is still in use at one place or the other. The Qatalum CEO...

While China might be cutting back its aluminium production by 700kt this year, according to a report in the South China Morning Post, the country is eclipsing the cut-backs by adding an estimated 4Mt of new capacity. As the global industry braces itself for more market surpluses and Chinese aluminium giant Chalco posts a HK$10 billion loss – based on depressed prices – aluminium is now the weakest performing metal on the LME and has been heading in that direction for the last four years.The exact amount of 2013 cut-backs in China is disputed: some say 500kt and others say 700kt (mainly by small-to-medium-sized companies). In many ways it’s academic as China adds 4Mt of new capacity and, in some instances, keeps older, less profitable operations running to stave off worries about...

Oman Aluminium Processing Company, manufacturers of aluminium rod and overhead line conductors, is planning to expand its production capacity by 75,000 metric tonnes per annum. “The expansion will result in the company more than doubling its existing production capacity. The existing and future market base of OAPIL, coupled with OAPIL’s technological advantage indicates a significant opportunity to be tapped. The expansion project envisages to generate a number of job opportunities for locals and will contribute to the non-oil exports of the Sultanate,” said CEO Frederic Rouyer.

Alcoa expects to more than triple its sales of aluminium sheet to automakers by 2015 as they reduce car weight by substituting it for steel in car bodies, an Alcoa executive said. Revenue from auto sheet - mainly used in car bodies - is expected to surge to $580 million by 2015 from $160 million last year, Randall Scheps, global automotive marketing director, said in a telephone interview. "It is moving from the very expensive, luxury vehicles into the mass market vehicles. That's what so exciting about what's going to happen in the next two or three years," Scheps said. Car makers are being forced to cut weights of cars to meet tough emission standards. Aluminium is a third of the weight of conventional steel but more expensive. The steel and aluminium industries are in a high stakes...

Deputy Minister-designate for the Ministry of Energy and Petroleum, John Abdulai Jinapor, yesterday, appeared before the Appointments Committee of Parliament, and told its members that the government would not sit idle and see the Volta Aluminum Company collapse. He said, as per the assessment carried out on the company that was once the leader in the production of alumina in the sub-region, VALCO was still a viable venture which needed capital investment to operate at full capacity. "Ultimately, I believe VALCO can be made into a profit-making venture," he noted. According to Mr. Jinapor, VALCO was currently operating one out of its five port lines, due to unavailability of energy. "If we have enough energy, VALCO can run on all the five port lines. And with those five port lines, we can...

Vedanta Aluminium bosses are pleading with the Odisha State Government to get the bauxite flowing so that it can re-open its Lanjigarh alumina refinery, after a delegation from the Kalahandi and Rayagada districts told the Kalahandi collector and district magistrate that the plant should resume operations immediately. In early December 2012, the plant closed due to a lack of bauxite and despite offering top dollar to its rivals, Vedanta has been unable to restart the plant. Vedanta president and COO Mukesh Kumar said the plant had been pleading for bauxite for some time. In a letter to Odisha’s Steel & Mines Secretary he insisted that urgent action be taken in line with a Memorandum of Understanding between Vedanta and the Government of Odisha way back in June 2003 and amended in April...

According to the US Commerce Department, the country’s building permits were at a seasonally adjusted annual rate of 902,000 in March, falling short of forecasts. However, this was offset by upbeat housing starts in March, which surged to the highest level since June 2008 at 1.04 million units. Rebound in housing market, gold and crude oil helped alleviate bearishness and sent the US dollar index. Positions of LME aluminum decreased as much as 50,000 lots on short-covering. LME aluminum hit a high of USD 1,928/mt during European session, and finally ended the day up 2.52% at USD 1,923.3/mt. Latest LME aluminum inventories increased 6,675 mt to 5,199,000 mt. Aluminum prices will rebound, but only slightly as longs are cautious. LME aluminum should test support at USD 1,900/mt, with prices...

Midas Holdings Limited was pleased to announce that its subsidiary, Jilin Midas Aluminium Industries Co., Ltd has been awarded orders totaling S$17.3 million (approximately RMB86.5 million) from Alstom Transport S.A. to supply train car body module components for new trains on the Singapore North East Line and Circle Line on 9 April 2013. Mr Patrick Chew, Chief Executive Officer of Midas, said, "Since 2004, we have successfully secured contracts to supply large section aluminium alloy profiles to manufacture body frames for the Singapore Downtown Line Project and Circle Line Project amongst others. We are pleased to have been awarded these orders from our long-standing major customer Alstom, testament to Jilin Midas' technical capabilities both at home and abroad." In February 2013,...

The Honourable Denis Lebel, Minister of Transport, Infrastructure and Communities, Minister of the Economic Development Agency of Canada for the Regions of Quebec, and Minister of Intergovernmental Affairs, today announced that Universite du Quebec a Chicoutimi's Centre d'Entrepreneuriat et d'Essaimage has been granted funding for the establishment of the Centre de transfert en extrusion, an extrusion technology transfer centre, in Alma. "Our government remains focused on jobs, economic growth and sustainable prosperity. This is evident in our ongoing support of organizations that, like the Centre d'Entrepreneuriat et d'Essaimage of Universite du Quebec a Chicoutimi, accompany enterprises in their efforts to become more competitive, which is a catalyst of economic growth," said Minister...

With a decline of 1.2 percent on the LME to $1,889 per metric ton on April 12, 2013, the aluminum 3-month price recorded the biggest decline of the day. The cash price of primary aluminum saw a 1.2 percent decline on the LME to $1,855 per metric ton. After falling 1.0 percent, the cash price of primary Indian aluminum reached a thirty-day low. Chinese aluminum prices were mixed for the day. Following two days of rising prices, the cash price of Chinese aluminum dropped 0.1 percent. Chinese aluminum scrap held its value last Friday. The price of Chinese aluminum billet was essentially unchanged. For the fifth day in a row, the price of Chinese aluminum bar remained essentially flat.

Reliance Steel & Aluminum Co. today announced that it has completed the previously announced acquisition of Metals USA Holdings Corp. for $20.65 per share in cash, pursuant to which Metals USA has become a wholly-owned subsidiary of Reliance. This acquisition adds a total of 48 service centers strategically located throughout the United States to Reliance’s existing operations and complements its existing customer base, product mix and geographic footprint. The purchase price for Metals USA was $786 million paid in cash at closing for the holders of Metals USA stock, options and restricted stock, and the assumption of $454 million of net debt, representing a Metals USA enterprise value of approximately $1.24 billion. Reliance funded the transaction and refinanced Metals USA indebtedness...

The London Metal Exchange said on Monday that it has received an application from Malaysian aluminum producer Daiki Aluminium Industry Sdn. Bhd. to list its DIKM brand for trading under the exchange's aluminum alloy and NASAAC futures contracts. Daiki has an aluminum smelter that is able to produce 28,800 metric tons of aluminum ingots a year. The exchange also said Monday that it has approved the name change of a special high grade zinc brand from EMC-H and EMC-K to EMC-H SHG and EMC-K SHG respectively.

In 2013, markets on the whole have not been on fire, but a noticeable laggard has been the metal stocks. Among other things, they have been hit by the pronounced slowdown in manufacturing and the dwindling business confidence. Manufacturing growth, already, is on a downward swirl. Aluminium, for instance, was trading at $2,000 per tonne on the London Metal Exchange last year. It has been stagnating at that level for almost two years now. India's leading aluminum manufacturer, Hindalco, reported a 4 per cent drop in net profit in the third quarter of 2012-13. Hindalco's shares are trading at below INR 90 per share. It hit a one-year low of INR 86.90 on March 26 from a high of INR 137 in January, dropping 34 per cent drop in three months. At the current demand situation, nearly 25 per cent...

Austrian aluminium products maker Alumero Group, which took up production in Slovenia last year on the ashes of aluminium plant Almont, is happy with its business in Slovenia, Alumero boss Manfred Rosenstatter has told the STA. The group made EUR 3.8m in revenues with its Slovenian plant in the second half of 2012. The Slovenian part of the group, which accounts for around 8% of the group's total revenues, generated EUR 140,000 in profit in its half-year operation last year and the group hopes to at least double the result to revenues of around EUR 7.5m this year. The Austrian company intends to keep the number of employees at 80 this year, but then double it in mid-term if the planned results are reached.

In trading on Monday, shares of Century Aluminum Co. entered into oversold territory, changing hands as low as $6.61 per share. We define oversold territory using the Relative Strength Index, or RSI, which is a technical analysis indicator used to measure momentum on a scale of zero to 100. A stock is considered to be oversold if the RSI reading falls below 30. In the case of Century Aluminum Co., the RSI reading has hit 26.8 — by comparison, the universe of metals and mining stocks covered by Metals Channel currently has an average RSI of 34.8, the RSI of Spot Gold is at 17.4, and the RSI of Spot Silver is presently 17.2. A bullish investor could look at CENX’s 26.8 reading as a sign that the recent heavy selling is in the process of exhausting itself, and begin to look for entry point...

Samsung could be changing the build design for the Samsung Galaxy Note 3, potentially opting to use an aluminium body akin to that of the HTC One. When Samsung saw the success of the HTC One, the South Korean company is said to be “worried” about the design and build quality of their smart devices and plans to adjust the Samsung Galaxy Note 3. According to SamMobile sources, “Samsung is planning to switch build quality for the next flagship device”, especially after the company received criticism for the Samsung Galaxy S4’s plastic finish. The source could not reveal the material choice for the Samsung Galaxy Note 3, but did say it will not be using the design guidelines of the Samsung Galaxy S4. An aluminium design has been tipped due to the fact Samsung were so impressed by the HTC One....

Aluminium prices fell to their lowest level in 3-1/2 years on Monday, tracking falls across base metals as lower-than-expected growth figures from major consumer China raised fears about the outlook for demand. Benchmark aluminium on the London Metal Exchange fell to $1,818 a tonne, its lowest level since early October 2009.