
Vishay Intertechnology has added 550 V and 600 V options to its 259 PHM-SI series of snap-in aluminium electrolytic capacitors. The new models are intended for high-voltage applications in industrial equipment, energy systems and medical devices. The higher voltage ratings allow engineers to use fewer capacitors in DC bus systems operating between 800 V and 1,100 V. Earlier designs typically required three capacitors rated at 400 V to 450 V, connected in series with voltage-balancing resistors. The new 550 V and 600 V models can reduce the number of components and the need for balancing circuits, while also saving circuit board space and lowering costs. Explore further insights and forecasts for the aluminium flat rolled products (FRP) market from our comprehensive report - Aluminium Flat...
Aluminium Dolomites, a sister company of Aluminium Bozen, will take over Hydro ’s remelt facility in Feltre, Italy. The deal will keep the facility running and see 35 employees move to the new owner. In November 2025, Hydro announced plans to shut its Feltre remelt and extrusion operations as part of a wider restructuring of its European extrusion business. It later put the remelt facility up for sale, seeking a buyer that could maintain operations and provide an alternative for its employees and the surrounding community. To know the global production, demand and consumption forecasts of aluminium extrusions, explore our report " The World of Aluminium Extrusions to 2035 " The transaction covers the aluminium remelt assets, the site, buildings and infrastructure. However, Feltre's...
Grow with
AL Circle

Bahrain-based Gulf Aluminium Rolling Mill Company (Garmco) plans to invest $50 million for capacity expansion, chief executive Graham Bruce told the GDN. The $450m annual turnover company will be boosting its re-melt and casting facilities in parallel with Alba's potline 6 expansion, he said in an exclusive interview. "Plans are finalised, feasibility studies have been completed and all necessary permits are in place. "A new casting facility will add 120,000 metric tonnes of casting capacity and forms an integral part of Garmco's 3-5 years strategic plan." The mill's current capacity is 165,000 metric tonnes annually. Garmco meets a third of its raw material requirements through the re-melt of scrap materials, which will also be expanded. "The expansion will create up to 60 jobs for...

Empty beverage cans from abroad can now be returned to practically any recycling machine in Finland, whether you get a cash return for them or not. Cans should not wind up as mixed waste, bottle recycling company- Palpa, says. A representative of the bottle and can recycling company says that almost every Palpa machine now accepts cans brought from abroad. A majority of non-refundable aluminium cans come from Estonia, which has its own recycling system. Machines where bottles and cans made of glass, plastic and aluminium can be returned are all found inside or adjacent to grocery stores or Alko shops. “There are about 4,000 bottle and can recycling machines in Finland that accept a very wide range of non-deposit beverage cans,” operative director Olli Alanen from Palpa said. If one of...

LME aluminium is expected to drop to a support at $1,898 per tonne, as it failed to break a resistance at $1,961 again. The resistance is provided by the 76.4 percent Fibonacci projection level of an upward wave c that developed from the June 12 low of $1,836. The July 14 high of $1,954.50 is lower than the July 9 high of $1,959, indicating a reversal of the uptrend or at least an extended correction from $1,959. The second leg of the correction could have started towards the 38.2 percent projection level at $1,898. A break above $1,961 will open the way towards $1,999, the 100 percent projection level. The views expressed are his own. No information in this analysis should be considered as being business, financial or legal advice. Each reader should consult his or her own professional...

Yunnan Aluminum Co., reported a loss of 290-298 million yuan ($47-48 million) or 0.188-0.194 yuan per share during the first half of 2014, the company said in its H1’s financial report. During the same period last year, the company posted a loss of 128.68 million yuan or 0.084 yuan per share. The bigger loss for H1 2014 was due to tumbled aluminum prices during the report period, the company said.

Some aluminum producers in Guizhou, Gansu, Henan and Guangxi are now restarting production after local governments introduced stimulus measures, but China’s aluminum market is not expected to suffer immediate impact from those resumptions in the short term, Shanghai Metals Market foresees. At present, some 700,000-tpy, one third of China’s idled aluminum capacity, is scheduled to resume production soon, SMM leant. Nevertheless, this restarting of idled capacity is proceeding more slowly than as markets had expected. Cash-starved smelters and similarly strapped local governments are finding it difficult to collect sufficient funding to support massive capacity restarts. Moreover, the preferential power rates promised by local governments remain subject to negotiations with power grid...

Russia's Rusal, the world's largest aluminium producer, is unlikely to start production at its Siberian Boguchansk aluminium project in 2014, the Energy Ministry said on Tuesday. Rusal, led by Russian tycoon Oleg Deripaska, has already delayed the launch of the 588,000 tonne-per-year Boguchansk smelter several times due to weak aluminium prices. The project, also known as BEMO, includes an aluminium smelter and a hydropower plant. It is being financed by Rusal and Russian state-controlled hydroelectric power producer Rushydro. The ministry said in a statement a recent visit by officials including deputy energy minister Vyacheslav Kravhenko showed the Boguchansk hydropower plant was almost ready but the aluminium smelter was not completely ready, "which raises doubts in its launch in the...

Explorer Bauxite Resources has increased the resource of its Athena bauxite deposit, in the Darling Ranges of Western Australia, by some 59%. The Athena deposit was now estimated to host some 36.2-million tonnes, grading 32.8% alumina and 2.8% reactive silica. The Athena deposit forms part of a joint venture (JV) between Bauxite Resources and a subsidiary of Shandong Bureau No 1 Institute for Prospecting of Geology & Minerals, HD Mining & Investments (HDM). Under the terms of the JV, HDM could earn a 40% interest in the project by undertaking a feasibility study on the project area. The Chinese firm could earn a further 20% participatory interest in the resource after completing the feasibility study and advancing towards a decision to mine. Bauxite Resources CEO Peter Canterbury told...

LME aluminium may rise more to $1,961 per tonne, as it has pierced above a resistance at $1,937. The resistance is provided by the 61.8 percent Fibonacci projection level of an upward wave c that developed from the June 12 low of $1,836. This wave has been interrupted by a higher resistance at $1,961, the 76.4 percent level, but it is capable of travelling to $1,999, the 100 percent level. With aluminium testing $1,837 again, the wave c could have resumed towards $1,961. The views expressed are his own. No information in this analysis should be considered as being business, financial or legal advice. Each reader should consult his or her own professional or other advisers for business, financial or legal advice regarding the products mentioned in the analyses.

Signature Aluminum Canada located in Pickering, Ontario has selected Granco Clark to supply performance upgrades to their existing 3000 Ton extrusion line. Signature is upgrading the press line to improve process control and increased capacity. Granco Clark is supplying a profile quench and a billet taper quench. The profile quench will provide production consistency with excellent metallurgical properties. The taper quench will allow for isothermal extrusion while maintaining extrusion speed throughout the entire extrusion cycle without compromising product quality. Founded in 1947, Granco Clark began manufacturing billet furnaces and has evolved into a worldwide, cutting-edge, single-source supplier and leading equipment manufacturer in the aluminum extrusion industry. With a proven...

While models that widely use the lightweight metal into their construction already exist, it’s the high visibility Ford F-150 that puts it mainstream, and others are expected to swiftly follow. Steel has been for many decades the go to material for the worldwide auto industry, even as aluminum was heralded by automakers as the next big thing because of its ability to make new cars lighter and thus increase fuel efficiency. Still, big obstacles were involved – cost and the complete overhaul of manufacturing technology that was needed among them – so its prime users remained the niche luxury automakers. Now, Ford is ready to put more than 700,000 2015 F-150’s annually on the roads, as it mulls increased fuel efficiency and the fact that research showed them 80% of buyers would go for the...

Leading aerospace manufacturer Alcoa today announced a 10-year, $1.1 billion agreement with Pratt & Whitney, a division of United Technologies Corp., for state-of-the-art jet engine components. Under the deal signed at the Farnborough Air Show, Alcoa will supply key parts for Pratt & Whitney’s engines, including the forging for the first ever aluminum fan blade for jet engines. The forging was developed for Pratt & Whitney’s PurePower® engines using an advanced aluminum alloy and a proprietary manufacturing process. Also for the PurePower engines, Alcoa is developing a fan blade forging using its most advanced aluminum-lithium alloy. “We’re going where no materials scientist has gone before,” said Alcoa Chairman and Chief Executive Officer, Klaus Kleinfeld. “Combining Alcoa’s proprietary...

The announcement was made at a government event by GM president Dan Ammann and president of GM South America Jaime Ardila with Argentine Chief of Staff Jorge Capitanich and Industry Minister Debora Giorgi in attendance. Argentina will be responsible for manufacturing a new Euro 6-certified aluminum engine. The plant will have an output of 90,000 engines per year, with 10,000 units going to the European Union annually. In 2012, then CEO of GM Dan Akerson announced the company would invest 450 million dollars between 2013 and 2015 to expand its Rosario Automotive Complex in order to build a new Chevrolet vehicle for South America and other emerging markets. The complex currently employs some 2,800 people and produces seven models. Production at the new factory is to start in 2017 and aims...

Sapa is a partner in a Norwegian project aimed at finding innovative technical solutions for deep and long-span fjord crossings. Its task is to develop an all-aluminium ship barrier for the initiative “Ferry-free coastal route E39.” Today, E39 consists of 1,000 kilometers of coastal route and eight ferry crossings. Politicians want a ferry-free route and upgraded transport corridor stretching from Kristiansand in the southern part of the country to Trondheim in mid-Norway. The less-complicated fjord crossings have already become ferry-free, however, the more extreme deep and wide crossings remain. One of these, the crossing of Sognefjord, represents a prime example of the challenges in finding solutions and technical advances for crossing such fjords. Sapa, together with their partners,...

In line with the mission to become one of the most efficient smelters in the world, Qatalum's new contractual arrangements for the supply of petroleum coke allow for a net savings in freight rates and time for the foreseeable future. Qatalum signing the contract with Petroleum Coke Industries Company (PCIC) Kuwait on June 17, 2014. In the project phase of Qatalum, three, 5 year contracts had been signed with Rain CII US, Oxbow US and PCIC in Kuwait for the supply of petroleum coke. At Qatalum, petroleum coke is used in the manufacture of anodes by Carbon. The contracts were signed in 2009 for a total volume of approximately 250,000 tonnes per annum, and shipments began in 2010. Additionally, the volumes supplied exceeded the consumption needs of the carbon plant therefore causing an...

Data from Shanghai Futures exchange released last week has shown a decline in the Aluminium inventories. The data release showed that Aluminium inventories were down to 390483 tonnes during the week ending 11 July 2014 from 392536 tonnes, on 4 July 2014. On-warrants showed gains to 214282 tonnes, from 213404 tonnes, which indicates metal to be staying in the warehouses. China's primary aluminium production grew 7.9 per cent from the year before in the first five months of 2014 to 9.59 million tonnes, lower than an 8.2 per cent rise in the same period last year, official data showed. The total reported production in China was 1.898 million tonnes in May 2014, indicating a 43.83% share in the world primary production. Production of China in May 2013 was 1.76 million tonnes. This marked a...

ALCOA’S second quarter earnings issued overnight surprised on the upside and contained a glimmer of optimism for the long-beleaguered upstream segments of the aluminium industry. The turnaround in the performance of Alcoa’s primary metals business, which produced a $US97 million profit in the second quarter compared with a $US32m loss a year earlier, has been driven by Alcoa’s own productivity measures but also an improvement in prices and in the industry’s supply-demand balance. Alcoa’s cost-cutting, smelter closures and capacity reductions — which will include the closure of its Point Henry smelter near Geelong next month — have been echoed across the industry outside of China. Since the financial crisis, Alcoa’s smelter closures have taken more than a million tonnes of metal out of...

Government has issued a formal notice, to Russian aluminium company UC Rusal, of its intention to revoke the special mining rights for its Alpart and Kirkvine refineries, if "bona fide" mining operations do not resume within six months. This was disclosed by Minister of Science, Technology, Energy and Mining Phillip Paulwell, as he closed the 2014/15 Sectoral debate in the House of Representatives. "The bauxite reserves associated with both plants represent over 200 million tonnes of ore idling in the ground while the plants flounder in uncertainty, and the livelihood of thousands continue to be in peril. This situation cannot be allowed to continue indefinitely," Paulwell said. The Alpart and Kirkvine refineries have been non-operational since 2009. The mining minister also noted that...

Chennai, July 10 (IANS) The hike in export duty on bauxite and the import duty on flat rolled products of stainless steel proposed by union Finance Minister Arun Jaitley is favourable for the domestic players, said a sectoral analyst. "It augurs well for aluminium industry's capacity expansion plans as domestic ore availability will increase," said Venkatesan Subramanian, vice president and global leader, metals and minerals practice, Frost & Sullivan. Presenting the budget proposals for 2014-15, Jaitley proposed to hike the export duty on bauxite to 20 percent from the current 10 percent. The impact of the duty hike will be that exports would be curbed while the domestic supply would increase, benefiting the Indian aluminium companies. Similarly, hike of import duty on flat rolled...