
India's aerospace and defence sector is expected to drive growing demand for specialised aluminium alloys, creating opportunities for domestic manufacturers such as Remal Alcast Pvt. Ltd. The company is expanding its high-performance aluminium billet manufacturing capabilities in Maharashtra, having recently completed its 1,000th billet cast as it progresses towards a planned annual production capacity of 72,000 tonnes. Remal began manufacturing aluminium billets in 2025 at its integrated casthouse in Vile Bhagad, Maharashtra. The facility produces billets across the 1xxx, 2xxx, 3xxx, 4xxx, 5xxx, 6xxx and 7xxx alloy series and operates under AS9100D, ISO 45001, ISO 14001 and ISO 9001:2015 certifications. Rather than concentrating on commodity-grade billet production, Remal is building its...
Rio Tinto has marked a new construction milestone at its Kangwinan bauxite project in Queensland, a major development expected to replace production from the ageing Andoom mine and help offset the planned closure of Gove in 2029. A groundbreaking ceremony at the USD 1.9 billion development near Weipa follows Rio Tinto's investment approval in October. The project is expected to add 20 million tonnes of annual bauxite production capacity, taking Weipa's overall capacity to approximately 44 million tonnes per year. First production is targeted for 2029, with full production expected by 2032. Kangwinan will establish a new bauxite production centre approximately 15km south-east of Rio Tinto's existing Amrun mine. The development forms part of the company's efforts to maintain production in...
Grow with
AL Circle

According to a study conducted in Barbados, the failing financial conditions are affecting the waste recycling efforts of University of West Indies (UWI) as well as Barbados in general. The study was conducted between April 30 and December 30, 2013 with a conclusion that read “the major waste management challenge affecting the UWI and Barbados as a whole was limited financial resources”. The recycling rate of the Cave Hill campus of the University, where the study was conducted, is higher than other campuses like Trinidad and Jamaica because a major initiative was taken by the authorities building 18 recycling stations across the campus for recycling plastics, glass and aluminium cans. The stations were located near high traffic areas like the major teaching and recreational areas. This...

Luoyang Huazhong Aluminum Co. will put its 150,000-tpy aluminum extrusion project in Henan on trial soon, local media reported today. The project represents 1.77 billion yuan ($290 million) in total investment and will generate 4.2 billion yuan in sales revenues once fully operational, it said.

The North American Aluminum scrap prices remained unchanged on ScrapMonster Price Index as on April 6th, Monday. 1100 Scrap prices remained flat over the day. The prices of 3003 Scrap too were flat at $0.78 per Lb. The prices of 356 Aluminum Wheels, 6063 Extrusions and 6063 Extrusions/Fe too were unchanged. Meantime, prices of 5052 Scrap and 6061 Extrusions remained flat at $0.75 per Lb and $0.71 per Lb respectively. The prices of Al/Cu Radiators and Al/Cu Radiators/Fe remained flat. Aluminum Radiators and Aluminum Radiators/Fe prices held steady. Aluminum Transformers and Breakage 50% Recovery prices remained unchanged on 6th April. Chrome Wheels and E.C Aluminum Wire prices remained flat over the day. Litho Sheets and MLC Clips remained flat at $0.73 per Lb and $0.67 per Lb...

To support the educational needs of children with autism in the UAE, Emirates Global Aluminium (EGA) has donated 60 tonnes of aluminium towards the construction of a new custom-built facility for the Dubai Autism Centre (DAC). A long-term supporter of autism causes, EGA has worked with the Centre through its subsidiary Dubai Aluminium ( DUBAL ) since 2009, providing funding for treatment and equipment as well as supporting DAC?s annual autism awareness drive. EGA?s donation equates to a value of AED 547,000 in building material, which will be used in 52 doors, 3,640 square metres of curtain walling and 6,115 square metres of aluminium cladding. EGA also played an instrumental role in engaging UAE aluminium downstream industry players in the manufacture of the end products. Gulf Extrusion,...

Aluminum processing capacity in Qinghai’s Ganhe Industrial Park looks set to hit 1.5 million tonnes by the end of 2015, local media reported today. The industrial park has attracted many aluminum processors in recent years for easy access to aluminum liquid from smelters in the park. For example, 600,000-tpy precision aluminum plate project is scheduled to reach full capacity at the end of 2016. Ground breaking will start on 5 million-piece-per-year aluminum wheel rim project and 50,000-tpy construction aluminum extrusion project soon.

The Aluminum Association has voiced its support of the U.S. Department of Energy after it announced a conditional commitment for a $259 million loan to Alcoa, which was done in support of the aluminum producer’s automotive expansion. With the aid of the loan, the company will grow its Alcoa, Tenn. operations as well as develop improved vehicle technologies. The lofty advance signifies the first conditional loan issued since 2011 under the Advanced Technology Vehicles Manufacturing (ATVM) loan program. "This is a great example of the public and private sectors working together to meet manufacturing and energy challenges,” said Aluminum Association President & CEO Heidi Borck. “Aluminum is uniquely positioned as a modern, sustainable material option – it is lightweight, strong and...

Orbite Aluminae Inc. is pleased to announce that it has shipped high purity alumina ("HPA") samples to five prospective customers, thereby entering their supplier qualification program. The samples were produced by calcining aluminum chloride hexahydrate ("ACH"), the precursor material for HPA, which was successfully produced at the Company's HPA facility in Cap-Chat in a production run during the third quarter of 2014. The ACH thus produced achieved purity levels in line with those required to produce 5N (99.999%) HPA. The ACH was subsequently decomposed and calcined using the Company's old calcination system, which was modified during the fourth quarter of 2014, as announced in the Company's November 5, 2014 press release. Overall purity levels of the shipped samples achieved 4N8...

UC RUSAL, a leading global aluminium producer, announces the launch of a programme to increase alumina production at the Urals Aluminium Smelter (UAZ) to 900 thousand tonnes. Investment in the project is expected to be over USD23 million. The programme is aimed at boosting annual alumina output at UAZ from 770 thousand tonnes to 900 thousand tonnes by the end of 2016. The programme foresees construction of a new autoclave battery, installment of two new precipitators and other large-scale industrial equipment. Design work is already underway. Design of the precipitators, heat exchangers and disk filters is expected to be completed by RUSAL-VAMI by the end of April. Design of a new autoclave battery is planned for completion by the end of July, with construction scheduled to commence...

National Aluminium Products Company (Napco) will commence production from its expanded facilities by the first quarter of 2016. Napco is implementing a major expansion programme to double its extrusion capacity and quadruple powder coating services, the company's chief executive officer Robert Holtkamp told Times of Oman. "We are midway through the civil works on a 15,000 square meter-plot and expect the civil phase to conclude by June, 2015. This would bring our total operating land space to roughly 65,000 square metres. We are bringing in two more extrusion presses from Spain and one vertical powder coating line from Italy. By the end of 2015, we will have a total of four extrusion presses, vertical and horizontal powder coating lines, one anodizing line, two wood-finish lines, a...

Alexandria Industries’ CEO, Tom Schabel received the Distinguished Service Award from the Aluminium Extruders Council (AEC) considered to be their highest honour recognizing exceptional dedication and service to the industry. Schabel has been a member of the Council since 2005, serving as the Chairman from 2009-10 with experience in the field of aluminium extrusion and precision machining industry since 1977. The most notable contribution made by him is to protect the industry from illegal and unfair trade practices of Chinese extruders by leading AEC to take up the issue with the U.S. Department of Commerce (DOC) resulting in the imposition of the Fair Trade Act. Leaders recognize Schabel’s involvement in the industry. “He helped re-invent the Aluminum Extruders Council, taking it from a...

Researchers at Stanford have invented a new technology in battery, building an aluminium battery that is flexible and can be charged in 1 minute. As use of smartphones escalate, the issue of battery backup continues to grow forcing people to carry along charging cables or powerbank everywhere. This battery, in contrast to lithium-ion batteries promises to be cheaper, safer and last longer, the researchers assured. The battery contains negatively charged aluminium anode and positively charged graphite cathode suspended on a ionic liquid electrolyte which can be housed in polymer-coated pouches making them flexible as fell as less susceptible to fire and explosions. However, the challenge at present is to find materials capable of producing sufficient voltage after repeated cycles of...

Aluminium prices gained 0.41% to INR 111.55 per kg in futures trade as speculators enlarged positions amid positive cues from global markets. Besides, increased demand at domestic spot markets influenced prices. At the Multi Commodity Exchange, aluminium for delivery in April rose by 45 paise, or 0.41%, to INR 111.55 per kg in a business turnover of 265 lots. Also, the metal for delivery in May traded higher by 40 paise, or 0.36%, to INR 112.25 per kg in five lots. Market analysts said the rise in aluminium prices at futures trade was due to a firming trend in copper and other base metals at the London Metal Exchange where trading resumed after the Easter holidays amid rising demand at spot markets here.

Qatalum plays an important role amongst Hydro’s Primary Metal group. At the AMPS Conference in Norway, it highlighted advanced improvement initiatives and picked up an award, led by similar improvement practices, for customer satisfaction. Qatalum delegates participated in the AMPS Conference from 24th March to 26th March in Oslo. AMPS is Hydro's common platform for continuous improvement which has been developed based on lean principles. On the market day of the conference, multiple Hydro smelters shared their best practices based on AMPS principles which are similar to QPS principle in Qatalum. Vivek Swarnkar and Tausif Shaikh presented Strategy Deployment implementation in Reduction. Alton Singh and Geir Nilsen presented Qatalum’s Central Maintenance process. Both the presentation were...

Aziana Limited is selling off its Manatenina bauxite project of Madagascar to Thankys Exports Pvt. Ltd and a conditional sale agreement has been decided upon by the two parties. As per the conditions of the purchase, the buyer company will pay a total purchase amount of $2 million to seller company in addition to a royalty of $0.50 per ton of bauxite extracted from the mines. A minimum royalty amount agreed upon in the agreement is $200,000 per annum that Thankys has to pay to Aziana whether there are any mining activities taking place or not. In case of mining, the minimum royalty amount will stay the same or will be subjected to royalty obligation if more than 400,000 tons of bauxite is mined. The agreement also lists a number of conditions including, completing a second phase of due...

Aluminium Bahrain B.S.C. (Alba), a leading aluminium smelter in the world, held a strategic offsite meeting titled ‘Preparing for Change Management’ for all executive management on Tuesday, March 31, 2015 at Alba Club with the aim to strengthen the company's competitive edge. This meeting was part of Alba’s Executive Education series and was led by the Company’s Chief Executive Officer, Tim Murray. The meeting focused on the challenges facing the aluminium industry and how does Alba align its priorities to achieve its objectives. Commenting on the offsite meeting, Alba’s Chief Executive Officer, Tim Murray said: “Alba and the aluminium industry are facing very challenging times with falling prices and rising input costs. The world is rapidly changing and we must change faster if we want...

In keeping with corporate commitments to excellence and sustainability, deliver high performance aluminium and ensure well-being of the people, Emirates Aluminium Company Limited PJSC (EMAL), an operating subsidiary of Emirates Global Aluminium PJSC (EGA), recently achieved three Certifications by TUV Rheinland after successfully completing manifold assessments at various levels in the organization. These included the ISO/TS 16949 Technical Specification (particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organisations); ISO 14001 Environmental Management Systems standard; and OHSAS 18001 Occupational Health and Safety Management Systems standard. In addition, following rigorous assessment by an independent agency, EMAL's...

Close to 2 million-tpy new aluminum capacity entered production in China from November through Q1, and an additional 1 million-tpy is about to come online in Q2, Shanghai Metals Market foresees. Falling power costs is the main incentive behind the aggressive expansions. The weighted average cash cost for operational aluminum capacity in China dropped 800-1000 yuan () per tonne year-on-year in Q1, SMM data showed. This is due to the growing use of captive power and falling coal prices. New capacity concentrates in Xinjiang, Inner Mongolia and Shandong, where power costs are comparatively lower. Some 500,000 tonnes of capacity was idled in Q1, 150,000 tonnes were closed for maintenance, but 400,000 tonnes of idled capacity returned to production, SMM statistics showed.

Orbite Aluminae Inc. today announces that, further to its press release of March 31, 2015, it has completed the first portion of the public offering of units in the amount of $10,000,000 under the short form base shelf prospectus and prospectus supplement dated March 18 and March 30, 2015 respectively (the "Offering"). Euro Pacific Canada Inc., the Underwriter under the Offering, still has an option to purchase an additional $5,000,000 of units within 30 days from the date hereof. "We are very pleased we managed to raise funds in excess of the $8,500,000 bought deal portion," stated Glenn Kelly , CEO of Orbite. "It is very rare that a pre-revenue company manages to get a bought deal, and we believe this speaks to the strength of our story. We continue to progress towards completion of our...