
As the European Union (EU) revises its CO₂ emission standards for cars and vans, European Aluminium is urging policymakers to recognise low-carbon aluminium alongside low-carbon steel in the proposed 2035 automotive credit system. The association, via its position paper, warns that restricting material-based emission credits to EU-produced low-carbon steel could distort vehicle design decisions, weaken the competitiveness of Europe’s aluminium industry and undermine the bloc’s technology-neutral approach to decarbonisation. At the centre of the debate sits Proposal 2025/0420 (COD), which introduces a compliance offset for the 10 per cent of fleet emissions remaining after 2035. Under the proposed mechanism, manufacturers would be allowed to use fuel credits or credits related only to...
Pakistan could take a step towards expanding its aluminium production capacity as Hub Power Holdings Limited (HPHL), a wholly owned subsidiary of The Hub Power Company Limited (HUBCO), has agreed to conduct a bankable feasibility study for a proposed 300,000-tonne-per-year aluminium smelter. The development was disclosed by HUBCO to the Pakistan Stock Exchange on November 16, 2026. A Chinese design institute will conduct the study and prepare the associated report, assessing the proposed project's technical, commercial and financial viability. According to the company, the findings of the bankable feasibility study will guide subsequent decisions on the project's development and financing. The proposed facility's implementation will remain subject to the study's outcome, necessary...
Grow with
AL Circle

LME aluminium is likely to face technical correction early this week and move at USD 1,505-1,530/mt, predicted SMM. China’s March CPI and PPI are expected to beat forecast. SHFE 1606 aluminium will move at RMB 11,700-11,800/mt, with market sentiment improving. In China’s spot aluminium market, spot discounts of RMB 0-20/mt and spot premiums of RMB 0-20/mt are expected over SHFE 1604 aluminium contract.

In a major blow to India's Anrak Aluminium Limited, the Andhra Pradesh government has issued orders for cancellation of bauxite supply agreement made between APMDC (AP Mining Development Corporation) Limited and Anrak Aluminium Limited (AAL). The decision has now raised a question mark on production from AAL which has completed construction of its alumina refinery at a cost of nearly INR 7,000 crore at Rachapalli in Makavarapalem Mandal in Visakhapatnam district nearly three years ago. In 2007, the then YS Rajasekhar Reddy government had entered into an MoU with the government of Ras Al Khaimah (one of the emirates of UAE) for mining about 224 million tonnes of bauxite from the Jerrela Group of deposits in Vizag. Consequent to the MoU, the government of Ras Al Khaimah formed Anrak...

The Malaysian bauxite export ban has been extended by an additional three months to July 15, 2016. The extension was announced Friday, last week, by Natural Resources and Environment Minister Datuk Seri Dr Wan Junaidi Tuanku Jaafar at a press conference. In announcing the ban, Dr Wan Junaidi made reference to an estimated 29kt of bauxite at the port, 1.3 million tonnes outside the port and 2.3 million tonnes “at the mining site”, totalling around 4 million tonnes yet to be exported. The original bauxite export ban came into force on January 15 this year, the three-month moratorium called for a halt to bauxite mining activities to address industry concerns such as pollution, a lack of regulations as well as excessive extraction by operators. According to The Bauxite Index, the ban is...

According to a recently published market research report, the global high purity alumina market is projected to reach USD 5.09 billion by 2020, growing at a CAGR of 20.1 per cent between 2015 and 2020. The rising demand of high definition televisions, smart phones, electronic sensors, and LED displays has been identified as one of the most significant factors influencing the growth of the high purity alumina market. The electronics market in China account for more than half of the global electronics market. The demand for electronic items has increased over the years, which has directly led to the increasing demand of high purity alumina in the Asia-Pacific region. LED is the largest application segment in the high purity alumina market. The use of HPA is increasing across other...

Exco Technologies said Tuesday, April 5, it has completed the acquisition of AFX Industries L.L.C. for US$73 million, excluding US$4 million of assumed debt. The transaction was first announced in February. AFX had revenue of approximately $115 million in 2015. Exco said it expects the acquisition will be highly accretive to its earnings per share. “AFX’s high quality operations are extremely complementary to our automotive interior trim business,” said Brian Robbins, president and CEO of Exco. “AFX also provides us with new capabilities and customer/ supplier relationships that undoubtedly strengthen our opportunity for further growth.” AFX was founded in 1998 and is based in Port Huron, Michigan with manufacturing operations in Mexico. The company supplies interior trim components...

Aston Martin will follow its recently unveiled DB11 with a minimum of five all-new models in the next four years. They will span three distinct model lines and form part of a plan to build 7000 cars per year by 2020. The DB11, a GT, was revealed at the recent Geneva motor show and will be on sale in the summer. It will be joined next year by an all-new Vantage sports car heavily inspired by the DB10 created for the James Bond film Spectre and by a replacement for the Vanquish in 2018. Both models will be built on versions of the DB11’s all-new aluminium architecture in Aston’s core sports and GT model line. By the end of the decade, Aston will also have on sale two models with no direct predecessors in new, separate model lines: the DBX crossover and an all-new Lagonda saloon. The model...

Chandigarh-based start-up Trestor is building a machine that can provide clean drinking water to people, especially the urban poor. However, to get 300 ml of water, a person has to put an used plastic bottle or an aluminium beverage can or aerosol can into the machine. Developed in just 95 days by two final year students of IIT-Bombay — Anurag Meena and Satyendra Meena — the machine, built to capitalise on Government of India's Swachh Bharat campaign, is being marketed by Trestor. Trestor was founded by serial entrepreneur Kunal Dixit in the year 2014. Leveraging technology to help create healthy, responsible communities, Trestor has developed this machine to involve people in keeping public places clean and provide them with ready access to clean drinking water. “Through our ‘Swachh...

Meizu M3 Note has been unveiled in China with 6000 series aluminium unibody and mTouch 2.1 fingerprint scanner starting at CNY 799 and will be available for purchase from April 11. Dubbed as the budget friendly smartphone similar to that of critically acclaimed m1 note and m3 note, the latest release of aluminium unibody-m3 note also packs in a wide range of latest technological innovations widely found in competing smartphones. While the 2GB RAM variant, priced at CNY 799 ($125) is equipped with 16GB internal storage, the 3GB RAM is equipped with 32GB storage space with a price tag of CNY 999 ($155). Both models offer eMMC 5.1 solid state chip storage and come with microSD expansion slots, which also serve as a second SIM card slot. The aluminium uni-body, integrated with Meizu m3 Note...

The Micromill is Alcoa’s proprietary technology that manufactures the most advanced aluminium sheet on the market, according to Alcoa. Since being introduced in December 2014, Alcoa has achieved some significant breakthroughs, producing more formable aluminium sheet, with greater strength, lighter weight and higher formability. The Micromill process, according to Alcoa, changes the microstructure of the metal, producing an aluminium alloy sheet with unique microstructure that has 40 per cent greater formability and 30 per cent greater strength than the incumbent automotive aluminium sheet produced in rolling mills, all while at the same time meeting stringent automotive surface quality requirements. Moreover, automotive parts made with Micromill made material will be twice as formable and...

The outcome of the transmission pricing methodology (TPM) review was becoming increasingly important to the future of the Tiwai Point aluminium smelter, Forsyth Barr broker Damian Foster said yesterday. Smelter owner New Zealand Aluminium Smelters (NZAS) was undertaking work to determine the level of maintenance capital expenditure it had to undertake. It was expected the company would have to make a decision soon on its deferred maintenance spend. "Committing to capex is a good indication NZAS is likely to stay open for longer. However, it is clear the outcome of the transmission pricing methodology review is becoming increasingly important,'' Mr Foster said. In March, the NZAS contact with Meridian Energy was amended to allow the smelter to defer its decision on contract volumes, which...

China Aluminum International Trading Co. (Chalco Trading) cut aluminium prices in major markets this past week after three weeks hike, it said online. The table below shows the aluminium price corrections made by Chalco Trading:

SHFE 1606 aluminium will face technical correction after falling below the 10-day moving average, and should move at RMB 11,600-11,750/mt on Friday, SMM forecasts. According to SMM, LME aluminium will trade in a range of USD 1,490-1,510/mt, In China’s spot aluminium market, spot discounts of RMB 0-20/mt and spot premiums of RMB 0-20/mt are expected over SHFE 1604 aluminium contract. SHFE Aluminium ended with declines SHFE 1606 aluminium opened at RMB 11,795/mt on Thursday. The most active contract climbed to RMB 11,810/mt on long buying, but then retreated to RMB 11,750/mt as longs took profit at highs. Finally, SHFE 1606 aluminium ended down RMB 50/mt at RMB 11,780/mt. Trading volumes were down 28,244 lots to 121,118 lots, and positions were up 5,270 to 256,784. SHFE 1606 aluminium is...

ASX-listed Metallica Minerals has struck a heads of agreement (HoA) with the operator of the nearby Hey Point bauxite mine to provide logistical services for the Urquhart bauxite project, in Cape York. The agreement would see direct shipping bauxite from the Urquhart mine delivered to export vessels through the approved Hey Point load-out facility, some 15 km away. The HoA included capped contracting rates over the projected life of the project, as well as access to the Hey Point load-out facility for transshipping bauxite. The agreement would form the basis of a full binding service contract and a binding access agreement, which was targeted for August this year. “As a bulk commodity operation, the economics of the Urquhart bauxite project are closely tied to the logistics of delivering...

Kuantan MP Fuziah Salleh wants the three-month moratorium on bauxite mining in the state be extended until a more comprehensive standard operating procedure (SOP) is put into place. Fuziah also urged that existing licences for bauxite mining activities be cancelled and new applications be made compulsory. This way, an environmental impact assessment (EIA) must also be made mandatory as one of the requirements for a successful application, she said. Citing the moratorium, which will end come April 15, Fuziah said Kuantan residents were still unsure of their fates. “The SOP previously mentioned by various quarters, including the Pahang state government, is still hazy – it doesn't include solutions to all aspects of pollution,” she said. Recalling bauxite activities which took place before...

The Mozambican government is concerned at the lack of a market for the bauxite mined in the central province of Manica.Last year, Manica produced 4,985 tonnes of bauxite, a 47 per cent increase on the 3,386 tonnes produced in 2014. But much of this production remains unsold because of the difficulties in finding a market, inside or outside the country. The Manica Provincial Director of Economy and Finance, Virgulino Nhate, speaking at a meeting of the provincial Development Observatory said that the main potential buyer is Zambia - but for reasons that Nhate did not know, Zambian interest in Manica bauxite has declined sharply. “We have a lot of bauxite in the province”, said Nhate. “Zambia used to buy much of this product. But in recent years it has been buying in very small quantities,...

Benetti has launched the new 45 metre custom superyacht Domani this week for an Owner with a passion for cruising the world. The Owner’s fourth Benetti, Domani was built for an expert sailor who loves cruising with his family across the globe. His extensive experience, along with Benetti’s construction expertise, resulted in a superyacht suitable for intensive use. The external design of this four deck steel and aluminium yacht is the result of Benetti’s in-house design team while her interior styling was created by Carlo Galeazzi with considerable input from the owner and builder. The efficient use of space is one of the peculiarities of this below 500GT full displacement yacht, offering a deceptive amount of room for a 45 metre thanks to the use of established Benetti platforms. The sky...

Vivocom Intl Holdings Bhd’s (Vivocom) subsidiary, Neata Aluminium (M) Sdn Bhd (Neata), was awarded RM37.5 million worth of contracts yesterday, with the latest projects being Third Avenue Cyberjaya for an amount of RM22.5 million, and Kemensah Development for an amount of RM15 million for the supply and installation of aluminium works. This announcement to Bursa Malaysia yesterday is the latest in a series of solid wins for Neata, a subsidiary of Vivocom, a leading conglomerate in the sectors of construction, telecommunications and now manufacturing. “Since the acquisition by Vivocom last year, our business has grown by leaps and bounds, in particular our aluminium manufacturing and installation business. “We have secured almost RM80 million worth of contracts during the past nine months...

The recently launched Mazda CX-3, a taller version of the Mazda 2, certainly looks the part with chunkier appearance and immaculate exterior complemented by a simple yet modern interior. What impresses most with Mazda cars is the company’s KODO design language. On the CX-3, the language is expressed externally through short overhangs, powerful lines and striking proportions. The CX-3’s bold face centres on the grille and extends through the chromed signature wings into the headlamps. The rear combination lamps stretch from the body into the liftgate with a shape echoing the headlamps. The Mazda CX-3 features a 16-inch aluminium wheels on the Active and Dynamic models and 18-inch aluminium wheels which feature five sets of double spokes with a machined outer finish that contrasts with the...