
As the European Union (EU) revises its CO₂ emission standards for cars and vans, European Aluminium is urging policymakers to recognise low-carbon aluminium alongside low-carbon steel in the proposed 2035 automotive credit system. The association, via its position paper, warns that restricting material-based emission credits to EU-produced low-carbon steel could distort vehicle design decisions, weaken the competitiveness of Europe’s aluminium industry and undermine the bloc’s technology-neutral approach to decarbonisation. At the centre of the debate sits Proposal 2025/0420 (COD), which introduces a compliance offset for the 10 per cent of fleet emissions remaining after 2035. Under the proposed mechanism, manufacturers would be allowed to use fuel credits or credits related only to...
Pakistan could take a step towards expanding its aluminium production capacity as Hub Power Holdings Limited (HPHL), a wholly owned subsidiary of The Hub Power Company Limited (HUBCO), has agreed to conduct a bankable feasibility study for a proposed 300,000-tonne-per-year aluminium smelter. The development was disclosed by HUBCO to the Pakistan Stock Exchange on November 16, 2026. A Chinese design institute will conduct the study and prepare the associated report, assessing the proposed project's technical, commercial and financial viability. According to the company, the findings of the bankable feasibility study will guide subsequent decisions on the project's development and financing. The proposed facility's implementation will remain subject to the study's outcome, necessary...
Grow with
AL Circle

The Port of Corpus Christi has put in a bid to buy the property of Sherwin Alumina Co., now wrestling with bankruptcy and a nearly two-year-long labor dispute, federal court records show. The fifth-largest port of the USA has offered a bid totaling $32.9 million, and already has made a $2 million "good faith deposit" with a bank to move the process forward, according to documents filed Monday at U.S. Bankruptcy Court in Houston. The port also looks to spend $13 million in capital, deferred maintenance, and environmental improvements in the area if Sherwin Alumina or another company continues to operate the nonport assets in the production of alumina. The Port Authority on Tuesday authorized its staff to close the purchase of the land. In a letter included in the court filing, John P....

OpenAire, a Canadian designer of eco-friendly roof structures, said it has won a contract to manufacture a huge, aluminium elliptical-shaped dome for a 280,000-sq-ft shopping mall in Sharjah, UAE. Located less than 10 km from Dubai, the 31-storey complex will rise from the city's waterfront like an oasis of luxury retail and residential space. With an area of almost 300,000 sq ft and over 30 floors of space, the Sharjah Mall will be more than just a shopping centre. OpenAire has partnered with Aluminium Light Industries Company (Alico) to complete this flagship Sharjah Mall project. It will be, in short, a vibrant city within a city with inviting interiors. As its centrepiece, the mall will feature a remarkable aluminium elliptical dome skylight designed and manufactured by OpenAire....

The 4th Automotive Lightweight Supply-Chain Symposium will be kicked off on the 11th of July 2016 at the Jumeirah Himalayas Hotel in Shanghai, China. The AluMag Symposium, which was held the first time in Düsseldorf (Germany) back in 2014, has experienced a steady growth of attendance from international OEMs. Different from most Chinese conferences, the AluMag Symposium focuses on more intensive discussions with more international attendees under a much closer but also a warm atmosphere. Attendees will get to network with important lightweight supply-chain executives who will be coming from all around the world. The 4th symposium agenda features a number of high ranked industry executives. Among the booked speakers are: • Mr. Stefan Zangerle – Head of Purchasing Cast Parts BIW / Body and...

Staff at world class foundry MRT Castings is celebrating after winning a Queen’s Award For International Trade on Her Majesty’s 90thbirthday. Family-owned and managed MRT joined the prestigious list of UK achievers after growing export turnover by 330 per cent over the last three years. Overseas trade now accounts for 56 per cent of business at the aluminium die caster which last year recorded turnover of £7.2 million. The Hampshire company casts and machines complex engineering components for original equipment manufacturers all over the world. Its main markets are the medical sector, aerospace and defence. Many of the components manufactured by MRT are life-critical or safety-critical, requiring the highest levels of engineering expertise. Managing Director Phil Rawnson said: “We are...

Lee Swartling, Vice President, Sales & Marketing at Wagstaff retired from Wagstaff April 1. He is being succeded by Steve Anderson, formerly Director of Engineering at Wagstaff, Inc. Lee joined Wagstaff in May of 1999 as an Area Manager responsible for sales in Japan, Western North America, Russia and the Ukraine. In 2011 Lee was named Vice President, Sales & Marketing the position he held until his retirement. Lee graduated from the Colorado School of Mines and worked for Kaiser Aluminum for 26 years in various supervisory and managerial roles during his domestic and international assignments. Steve Anderson holds degrees in Electrical Engineering and Business Management from Washington State University. Steve joined Wagstaff in March of 1995 as an Electrical Engineer for the R&D...

The Directorate General of Safeguards (DGS) has initiated the investigation in alleged increased imports of unwrought aluminium for causing injury to the domestic aluminium industry. The period of investigation is 2011-12 onwards till 2015-16. This investigation came on the application filed by aluminium makers asking the government to “immediately impose a safeguard duty on the imports of unwrought aluminium for a period of four years.” The application was filed by Vedanta Limited, Bharat Aluminium Company (Balco) and Hindalco who have sought safeguard duty imposition on alloyed as well as non-alloyed wrought aluminium products. The domestic Aluminium industry has asked for increase to 10 per cent from current 7.5 per cent. It was 5 per cent earlier, when it was revised in this year’s...

China Aluminum International Trading Co. (Chalco Trading) hiked aluminium prices significantly in major markets this past week, it said through one of its online media handles. Chalco Trading is a full subsidiary under Chalco responsible for alumina and aluminium sales.

The Tax Authority of Mozambique has confirmed that it is holding negotiations with Vale Mozambique, the local subsidiary of major Brazilian mining group Vale, on the payment of capital gains tax. Vale Mozambique is one of a number of major companies with which the tax authority is currently having such talks. Vale Mozambique owns 95 per cent of the Moatize coal mine and 70 per cent of the Nacala Logistics Corridor. Tax Authority chairperson Amélia Nakhare told the O País newspaper that her agency did not regard these deals as completed yet, although the intention to sell was public knowledge, and therefore she could not specify the amount of tax to be levied. She did say, however, that “it would be significant”. Meanwhile, the provincial government has voiced its concern about the lack of...

Global Bauxite Conference 2015 took place in Kuala Lumpur at the end of June last year. Thanks to the participation of leading companies like Alcoa, Gunvor, Hydro, Itochu, Mitsui, Rio Tinto, Sojitz, South32, UC RusAl, etc. and also the great support from organizations like AZ China, Guinea Development Bank, International Aluminium Institute, Kuantan Port, Malaysian Mining Club, Minerals & Geoscience Department Malaysia, Spring Energy Sdn Bhd, Waja Securities Sdn Bhd, etc. and their overwhelming response the event is back again this year amid greater expectations. The 2nd Global Bauxite Conference 2016 will be held on 29-30 June in Bali, Indonesia. Event Background Two years ago, Indonesia banned bauxite export and encourages investment in alumina plants. But local alumina plants...

Constellium N.V. announced yesterday the Annual Report 2015. The Group's financial highlights are as follows: Total shipments in 2015 were 1,478k metric tons, a 39 per cent increase compared to 1,062k metric tons in 2014, driven mainly by the integration of Wise and reflecting good traction from automotive rolled products, automotive extruded products and aerospace rolled products. Revenues for 2015 were €5,153 million, which represents an increase of 41 per cent, or €1,487 million, from 2014 resulting primarily from the integration of the Muscle Shoals facility. Adjusted EBITDA for 2015 was €343 million, an increase of €68 million, or 25 per cent, from the 2014 Adjusted EBITDA, driven by the acquisition of Wise, record performance in the Automotive Structures and Industry (AS&I) segment,...

There is a sense of 'economic' cheer in the air, so to speak, after the February IIP stood at 2 per cent versus (-) 1.5 per cent in January. After spending three months in the negative territory, factory output finally rose on the back of a strong performance by mining and electricity sectors, while retail inflation moderated further in March. Also just recently, the Reserve Bank of India in its monetary policy review cut policy rate by 25 basis points and announced several steps increase liquidity. The General Index for the month of February 2016 stands at 184.6. The cumulative growth for the period April-February 2015-16 over the corresponding period of the previous year stands at 2.6 per cent. The Indices of Industrial Production for the Mining, Manufacturing and Electricity sectors...

The Richards Bay Industrial Development Zone (RBIDZ) in South Africa wants to establish an aluminium metals hub comprising downstream product manufacturers in the KwaZulu-Natal city to tap into the growing use of aluminium instead of steel by the automotive sector. Aluminum has become the second most used material in the auto industry – next to steel – since it weighs less than half of steel or cast iron in the manufacturing process, Zululand Observer reported. According to the Aluminium Association, an American organisation, the use of the metal in commercial vehicles continues to accelerate because it offers the “fastest, safest, most environmentally friendly and cost-effective way to increase performance, boost fuel economy and reduce emissions while maintaining or improving safety and...

China’s State Council is urging for elimination of outdated and excess capacity in energy-intensive and highly-polluting industries, including aluminium, Shanghai Securities News reported. The State Council recently issued the 2016 Action Plan for Implementation of Outline for Quality Development. Under the Action Plan, China shall enhance work to weed out outdated and excessive capacity in strict compliance with production licenses and industry entrance system.

Aluminium hit a six-month peak on Wednesday as the appetite for risk increased among investors who took a more upbeat view on the Chinese economy and saw commodities as relatively cheap. Analysts attribute the buoyancy in metals markets to the bounce in oil prices. "I think there's some restocking coming through in China based on some stability in the economy and generally we're seeing some risk appetite coming back. There's a certain warming towards commodities in general," said Robin Bhar, head of metals research at Societe Generale in London. Three-month aluminium on the London Metal Exchange climbed 2.2 per cent to close at $US1622.50 a tonne, the strongest since October 2015. Aluminium is the top gainer on the LME over the past month, up some 6 per cent after producers cut output,...

Bechtel, a global leader in engineering, procurement and construction, has been selected by Aluminium Bahrain, B.S.C. (Alba) to build the sixth potline for their Alba aluminium smelter in the Kingdom of Bahrain. Upon completion, Alba will become the world's largest single-site aluminium smelter. Bechtel will be responsible for designing and constructing the aluminum smelter's sixth potline and other related infrastructure. Line 6, which is expected to begin production by early 2019, will increase Alba's annual output by 540,000 tonnes, bringing total capacity to 1,500,000 tonnes. Bechtel has worked with Alba for more than 25 years, including previous work as EPCM contractor for the smelter's Line 4 and 5 expansions. "We are pleased to be working with Alba again to add Line 6, which marks...
The Technology Development & Transfer department at Emirates Global Aluminium (“EGA”), the largest primary aluminium producer in the GCC region and among the top five producers in the world, continues to focus its efforts on improving the operating performance of the proprietary reduction cell technologies at EGA’s midstream industry assets in the UAE so as to ensure ever more efficient, cost-effective operations. The practice is founded on a long history of successful technology development and industrial implementation that has positioned EGA as a respected competitor in this sector of the global aluminium industry. For example, EGA’s latest generation DX+ Ultra Technology – ranked among the most efficient reduction cell technologies currently available – has been selected by Aluminium...

UC RUSAL, a leading global aluminium producer, and PJSC TransContainer have announced the signing of a 3-year contract to ship RUSAL products in containers. TransContainer will be responsible for all of RUSAL’s shipments in containers within the territory of the Russian Federation from May 1, 2016 and, additionally, will be responsible for all sea containers to Asian markets (Vietnam, South Korea, Taiwan and Japan) and other regions from August 1, 2016. “Containerization is one of the key priorities of RUSAL’s sales policy. The main advantages of this delivery method are that our goods are guaranteed safely as cargo and it is logistically cost efficient whilst working with the end-customer,” Vladislav Soloviev, RUSAL CEO, commented. “With a view to developing a long-term partnership,...

A new study released on April 20 shows the continued importance of the U.S. aluminum industry to the national economy. Research conducted by economic research firm John Dunham & Associates found that the domestic aluminum industry directly employs nearly 161,000 workers and contributes more than $75 billion to the national economy. When supplier and induced impacts are taken into consideration, the industry is responsible for nearly 713,000 jobs and $186 billion in economic impact – more than 1 percent of national GDP. According to the report, while certain segments of the domestic aluminum industry have struggled in recent years – with major job losses particularly in the upstream segment of the business – these losses have been offset by gains in downstream sectors like flat-roll...