
Futures: The most-traded SHFE aluminium 2701 contract opened at RMB 22,200 per tonne in the night session on Nov 13, hit a high of RMB 22,265 per tonne and a low of RMB 22,115 per tonne, and closed at RMB 22,125 per tonne, down RMB 20 per tonne or 0.09 per cent from the previous close. It consolidated on a weak note, with prices running below all moving averages across the 5per 10per 20 per 40 per 60-day periods, which continued to trend downward and exert pressure. Trading volume during the session was 83,517 lots, with open interest at 277,000 lots, up 8,598 lots, driven mainly by bearish positioning. On the technical front, the 4-hour MACD remained below the zero axis, with DIFF below DEA and green bars persisting, indicating bearish momentum has yet to exhaust and the overall...
Emirates Global Aluminium (EGA) plans to spend USD 400 million to restore production at its Al Taweelah smelter in Abu Dhabi, following the damage sustained by the facility due to escalating regional tensions surrounding Iran on March 28, during the Middle East conflict. Most of the spending is planned for 2026, with the rest expected in 2027. The restoration work is now 61 per cent complete, and the company expects the smelter to return to full production in the first quarter of 2027. EGA's debt reached USD 5 billion at the end of September, up from USD 3.5 billion a year earlier, mainly due to higher capital spending. Explore the production, demand and consumption forecasts of bauxite and alumina in our report: " Global Bauxite & Alumina Market Forecast to 2036: Supply–Demand, Trade...
Grow with
AL Circle

China Aluminum International Trading Co. (Chalco Trading) cut aluminium prices in major markets markedly today after three consecutive days of hike, it said on its WeChat. Unit: yuan/tonne Note: Chalco Trading is a full subsidiary under Chalco responsible for alumina and aluminium sales.

Market will eye US May durable goods orders today. Crude oil prices will meet pressure from recovering supply. LME aluminium will test support at the 5-day moving average and move at USD 1,635-1,655/mt. SHFE 1609 aluminium will move at RMB 12,300-12,500/mt on Monday. In China’s spot aluminium market, spot premiums of RMB 60-100/mt are expected over SHFE 1607 aluminium contract. Key Macroeconomic Indicators for Base Metal Prices Eurozone retail sales and US factory and durable goods orders in May will be released today. Base metals should diverge today. Should Caixin’s service PMI in May weaken, market expectations that Chinese economy will slide further will grow, and will in turn weigh down base metals. Eurozone retail sales in May will likely improve, as Germany’s monthly and annualized...

Suriname's President Desi Bouterse on Monday urged Caribbean Community (Caricom) member states that are involved in bauxite mining, mining of other industrial metal ores, and oil to unite towards industrialisation rather than continue to be vulnerable to global commodity prices. “Those member-states of Caricom and the wider Caribbean, which have been dependent on the extractive sectors, need to get together to discuss meaningful ways to shift from the export of commodities of the industrial products. We have to join hands both nationally and regionally to consider effective ways of industrializing our economies and seriously improve our service sector by linking productivity with connectivity,” he said. Guyana has long harboured ambitions of resuscitating the production of alumina...

The bauxite mine, Hydro Paragominas, ranks as number one on the list over mining companies in Brazil in the latest edition of Best and Biggest of EXAME magazine. Executive vice president in Bauxite & Alumina, Alberto Fabrini, highlights that the recognition is an award earned by all at Hydro Paragominas. “This is a proof that when practicing Hydro’s standards and values, you get an engaged unit who is able to achieve impressive results”, says Fabrini. In 2015, Best and Biggest of EXAME magazine did a detailed evaluation of the financial reports and indicators of the companies, resulting in a list with 20 companies. “This award is to all the 1400 employees and all the contractors. This recognition motivates us to keep going. I believe more of our units can achieve this kind of...

CBIX rose over the week, up 2.4 per cent (US$1.1) to US$46.9/dmt on the back of higher ViU-priced Guinean material, partially offset by lower ViU-adjusted prices from other regions. Malaysian FOB prices continue to hold their ground, quoted at US$25/dmt to US$26/dmt for unwashed material, with washed material fetching around US$37/dmt FOB. Reports out of Malaysia over the week quoted stockpiles as high as 5.4 Mt at or near the port of Kuantan. Our own intel suggests stockpiles of around 1.5 to 2 Mt at or near the port, with exporters ready to resume operations as soon as the ban is lifted. Larger miners have mostly taken the measures necessary to conform with new environmental requirements and are now waiting for the ban to be lifted. When it is, exports are likely to resume quickly....

Coca-Cola Malaysia refuted allegations that its imported Coca-Cola UEFA Euro 2016 limited edition aluminium bottles sold in selected outlets in the country contain alcohol. It said although the limited edition aluminium bottles were not produced in Malaysia but imported from Europe, “the ingredients and manufacturing process used in the production of Coca-Cola beverage are rigorously regulated by the government and health authorities in more than 200 countries which have consistently recognised the drink as a non-alcoholic product”. “These include countries where Islam is the major religion,” it said in a statement, here, today. “The company understands the local market and recognises and respects the importance of reassuring the Muslim consumers that its products meet the strict halal...

Goa Carbon has reported production of 15,059.100 MT (million tonnes) of Calcined Petroleum Coke for the month of June 2016. Of the total production achieved for the month, Bilaspur plant produced 1,834.000 MT of Calcined Petroleum Coke, Goa plant produced 2,519.100 MT of Calcined Petroleum Coke while Pradeep plant has produced 10,706.000 MT of Calcined Petroleum Coke. On the sales front, the company has sold a total of 13,988.570 MT of Calcined Petroleum Coke products for the month of June 2016. Of the total sales achieved for the month, Bilaspur plant, Goa plant and Paradeep plant of the company sold 1,614.700 MT; 4,409.820 MT and 7,964.050 MT respectively. Goa Carbon is into the business of manufacturing and marketing Calcined Petroleum Coke. Goa Carbon is firmly established as a...

Alcoa plans to announce its second quarter 2016 financial results on Monday, July 11 after the market closes. The press release will be available on the Investor section of Alcoa's website, and a link to the press release will also be available on Alcoa's twitter handle. A conference call to discuss the quarterly results and business developments will be held on Monday, July 11 beginning at 5:00 p.m. EDT. The conference call will be webcast live via Alcoa's website, with presentation materials available concurrently with the press release. Analysts are expecting a decent quarter of results starting with Alcoa on July 11th. Unless the clash with Alumina has an impact on the results, Alcoa is expected to report a positive result for the second quarter.

Researchers at Texas Tech University in Lubbock have developed a method for stabilizing aluminium fuel powder used in fireworks that increases their shelf life and, as a result, makes them safer to use. Aluminium powder is used as a fuel for both commercial-grade and professional-grade fireworks. Although it works well in that role, it also degrades quickly, sometimes becoming unstable and no longer fully combustible in as short as a few months. These duds don’t always become completely inert however, and still can (and sometimes do) detonate and injure individuals who return to investigate why the firework has not yet gone off. “The duds are usually the most dangerous fireworks,” said Michelle Pantoya, a professor and J.W. Wright Regents Chair in the department of mechanical engineering...

Ford Motor Co. narrowly beat General Motors Co. in sales of full-size pickup trucks during the half of this year. Ford’ F-Series pickup sales rose 10.7 percent to 395,244 through the end of June, according to industry data issued Friday. GM, by comparison, sold a combined 382,134 Chevrolet Silverado and GMC Sierra pickups – just a 0.9 percent gain – during the same period. Silverado sales have fallen slightly this year, despite aggressive marketing that included a commercial showing a dropped tool chest punching a hole in the bed of the rival F-150 pickup. The spot was a knock on the aluminum architecture of the Ford’s body and bed. “With Chevrolet sales flat, one wonders if the splashy incentive program that kicked off June and the provocative Silverado steel bed versus Ford’s F-150...

The former Mardyke Estate in Rainham, east London, has undergone a substantial transformation to make way for a new residential development, Orchard Village. Circle Housing has invested £80million to redevelop the old housing estate, creating 555 new homes to meet local affordable housing needs. Designed by PRP Architects and developed in its entirety by Willmott Dixon, the project specified AluK aluminium curtain walling, window and door systems throughout all four phases, three of which have been completed. To meet security requirements, all windows and doors complied to the Secured By Design (SBD) initiative, with the GT55 TB commercial door systems integrating electric strike access with key fob entry. The AluK GT55 TB is believed to be the first aluminium commercial door system to be...

A new portable 3D printer that is capable of being folded up or down to help with transportation, has been launched this week via the Kickstarter crowdfunding website by 3DSTUFFSNL, a development company based in the Netherlands. The TOPEEDOBOT wireless connectable, portable 3D printer has been constructed using a strong yet lightweight aluminium framework and is capable of near silent print operation, as well as being able to print in multiple colours, says its creators. The frame of the printer is designed and made of extruded aluminium profile, giving the TOPEEDOBOT a rigid solid structural frame. Assembled with custom, aluminium parts designed by Emmanuel A. TOPEEDOBOT is designed and developed for professionals, hobbyists, students, makers and thinkers. Thanks to feedback, comments...

Carl F Groupco has extended its range of Siegenia hardware with the addition of the TITAN AF, a tilt and turn system newly introduced to the UK market. Key features include the AF concealed axxent 24+ variant, a completely new design, providing a completely jigless solution for the majority of profiles, with sash load bearing capabilities up to 150kg. The system can also be easily and economically upgraded to comply with PAS 24 for security. The expansion of Carl F Groupco’s Siegenia range reinforces the strong decade long partnership between the distributor and manufacturer. The ALU 4200 and axxent ranges have been extremely successful tilt and turn aluminium systems for Carl F Groupco and the company is confident that the new AF system will be equally as popular. Commenting, John...

Vedanta is a major producer of high grade aluminium and various other products such as billets and ingots, which are supplied to secondary fabrication units. Although Vedanta has been a significant billet manufacturer for a long time, the requirement spelt out by an auto component downstream customer - Vikas Altech was a huge challenge. Conventionally, the micro tubes in automotive radiators are manufactured from copper. Due to ever-changing needs of the customer segments, these tubes are now required to be made from special alloys in which aluminium is the base metal. The application called for a special alloy and that too with a specific post treatment process (homozanization cycle). It also called for specific changes in the casting process like the filtration mechanism, changing the...

SHFE 1609 aluminum will meet strong resistance and move at RMB 12,550-12,800/mt on Monday. Positive June manufacturing PMIs from major economies will push LME aluminum up to USD 1,650-1,675/mt. In China’s spot aluminum market, spot premiums of RMB 0-40/mt are expected over SHFE 1607 aluminum contract.

The MCX-Aluminium future continued to trade within the INR97-INR112 range for the sixth consecutive month. It is currently poised near INR112; the upper end of the range. If the contract reverses lower from here, it can then fall to INR105 and INR103 in the coming weeks. On the other hand, a strong break above INR112 can take the contract higher to INR115, which is a key long-term resistance. A strong break and a decisive weekly close above INR115 will reduce the possibility of a fresh fall . Such a break can take the contract higher to INR120 or even INR125 over the medium term. But, inability to break above INR115 can drag the contract lower to INR112. If the contract manages to sustain above INR112, a sideways move between INR112 and INR115 is possible for some time. But a strong break...

India is at the threshold of emerging as the next biggest demand driver for aluminium- the strategic metal of tomorrow. Although, presently, the per capita consumption of the metal here stands at 2.2 kg against the world average of 8.4 kg, rapid urbanisation, improving automobile story of the country, and increasing GDP rate- indicate at a future where the use of aluminium has grown significantly. Countries which are now competing with India at the production front will then try to grab of a piece of this lucrative market. China, for instance, is already doing so. There the GDP rate has started declining and the demand for industrial metals like aluminium has shrunk considerably. Satish Pai, Deputy Managing Director of Hindalco Industries Ltd., sounded positive when he said this at the...

With plans to raise alumina production at its Lanjigarh refinery in Odisha's Kalahandi district by 50 per cent, bauxite starved Vedanta today sought quick steps for raw material supply from within the state. "We plan to enhance production in Lanjigarh refinery from 1 million tonne per annum to 1.5 mtpa, a 50 per cent increase. It will help in raising overall aluminium output," said Abhijit Pati, Chief Executive Officer (Aluminium) of Vedanta Ltd. Around three million tonnes of alumina would be required in order to produce 1.5 mt of aluminium, he said adding that the company's move to increase production would enable Lanjigarh refinery would provide 1.5 mt alumina. Regarding the rest, Pati said the balance requirement would have to be met through imports. Though the refinery at Lanjigarh...