
New Zealand-based aluminium beverage can manufacturer Recorp is weighing further production investment as it strengthens its presence in Australia. With its present operating facility in South Auckland, producing around 550 million aluminium cans annually, the company is exploring the possibility of opening a second production line as it looks to expand its customer base across the trans-Tasman market. Recorp entered the Australian industry in August 2026 with its 16,000-square-metre facility in Manukau, South Auckland. Operations at the plant commenced in November 2024, boosted by an investment of NZD 115 million (USD 62.89 million). Its current production line has the manufacturing bandwidth of up to 1,850 cans per minute, reinforced by eight bodymakers and two decorators. The equipment...
Australian bauxite producer VBX Limited has expanded the development scope of its Wuudagu bauxite project in Western Australia, following an updated Mineral Resource Estimate of 143.2 million tonnes and improved metallurgical recoveries. As a next step in the course, the company is assessing a mining and beneficiation rate of 8–9 million tonnes per annum (MTPA), up from 6 MTPA, as it advances the Definitive Feasibility Study (DFS). The update was provided by VBX’s Chairman George Lloyd in an address at its Annual General Meeting on November 20, 2026, accompanied by details of a completed AUD 4.5 million (USD 2.98 million) placement. Explore the production, demand and consumption forecasts of bauxite and alumina in our report: "Global Bauxite & Alumina Market Forecast to 2036:...
Grow with
AL Circle

Aluminium producer Vimetco will postpone the secondary public offering (SPO) of Alro Slatina shares on the Bucharest Stock Exchange (BSE), “due to adverse market conditions”, the group announced on Friday. “The company believes it is not in the best interests of Alro or its shareholders to proceed with an SPO at this point in time”, Vimetco said in a note to its shareholders. Vimetco, which is registered in the Netherlands and listed on the London Stock Exchange, announced in May that it wanted to sell up to 21 percent of its shares in Romanian aluminium producer Alro Slatina. Vimetco, the owner of approximately 84.19 percent of Alro’ shares said then it may conduct the SPO together with its indirect subsidiary Conef, a minority shareholder of Alro, which owns approximately 3.77 percent...

Reportedly, reconstructed and held by Changshu Aluminium foil Factory, Jiangsu Alcha Aluminium revealed its outline to construct 250,000 aluminum project in the Baotou National Rare Earth Hi Tech Industrial Development Zone in China's Inner Mongolia Autonomous Region. The company is one of the initial companies that are specialized in manufacturing bare and hydrophilic coated aluminum foil inside China. For the new plant project, the casting and rolling production lines are expected to be finished within 12 months while the whole project will be finished within 18 months. It has a designed annual production capacity of 100,000 tonnes for aluminum and aluminum alloy ingot, 100,000 tonnes for aluminum strip and 50,000 tonnes for aluminum foil.

Reportedly, reconstructed and held by Changshu Aluminium foil Factory, Jiangsu Alcha Aluminium revealed its outline to construct 250,000 aluminum project in the Baotou National Rare Earth Hi Tech Industrial Development Zone in China's Inner Mongolia Autonomous Region. The company is one of the initial companies that are specialized in manufacturing bare and hydrophilic coated aluminum foil inside China. For the new plant project, the casting and rolling production lines are expected to be finished within 12 months while the whole project will be finished within 18 months. It has a designed annual production capacity of 100,000 tonnes for aluminum and aluminum alloy ingot, 100,000 tonnes for aluminum strip and 50,000 tonnes for aluminum foil.

Aluminum foil containers maker Parekh Aluminex Ltd is looking to raise as much as Rs 100 crore ($22 million) through a preferential allotment to a host of overseas funds including Kitara Capital. The public listed firm is holding an extraordinary general meeting on July 25 for seeking the approval to issue equity shares on preferential allotment basis, the company said in a statement issued to Bombay Stock Exchange. The proceeds of the preferential share issue would be used for expansion and working capital requirement of the company. The firm is planning an expansion that would absorb Rs 300-350 crore. Parekh Aluminex is one of the largest manufacturer and exporter of aluminium foil containers, and also one of the biggest manufacturers of aluminium foil rolls and lids in India. It has...

Aluminium Bahrain (Alba)'s commitment to broaden opportunities for young Bahrainis in acquiring new skills, in expanding their knowledge base and in gaining practical work experience will receive an impetus with the commencement of the Alba Annual Summer Training Programme from July 3, 2011. The Alba Annual Summer Training Programme targets high school graduates, university students and Bahrain Training Institute trainees, and provides them with the opportunity to work in Alba for the duration of four weeks during their summer break. Commenting on the commencement of the Alba Annual Summer Training Programme, Alba's Chief Executive, Laurent Schmitt said: "As a key corporate social responsibility initiative aimed at investing in Bahrain's future generation, the Alba Annual Summer Training...

Novelis declared that it will invest $15.8 million to build a continuous casting line at its manufacturing plant located in Pieve Emanuele, Italy. The new production line will recycle waste aluminum material into metal, which will be used to manufacture rolled aluminum sheet. . The new investment follows Novelis’ announcement made In May 2011 to expand the production capacity of recycled metal used in its global rolling operations from the current value of 34% to 80% by 2020. The Pieve Emanuele facility is an integrated casting, rolling and finishing operation. The aluminum coil and sheet made at the facility is supplied to end users and distributors in construction and other industrial markets. The Pieve Emanuele facility also supplies aluminum coil to Novelis’ mill located in Bresso. In...

Novelis declared that it will invest $15.8 million to build a continuous casting line at its manufacturing plant located in Pieve Emanuele, Italy. The new production line will recycle waste aluminum material into metal, which will be used to manufacture rolled aluminum sheet. . The new investment follows Novelis’ announcement made In May 2011 to expand the production capacity of recycled metal used in its global rolling operations from the current value of 34% to 80% by 2020. The Pieve Emanuele facility is an integrated casting, rolling and finishing operation. The aluminum coil and sheet made at the facility is supplied to end users and distributors in construction and other industrial markets. The Pieve Emanuele facility also supplies aluminum coil to Novelis’ mill located in Bresso. In...

Automakers plan to use more aluminum over the next few years to meet higher fuel economy requirements, a trend that could send car prices higher. "The amount of aluminum that's used in cars is projected to double by 2020," said Alcoa spokesman Kevin Lowery. Federal fuel economy standards call for automaker fleets to average 34 miles per gallon by 2016. Last year, the U.S. fleet got about 23 mpg. Automakers say hitting the new numbers means cutting a lot of weight out of cars. Less weight means less of a load for the engine to move, immediately improving fuel economy. Car companies further boost those efficiency improvements by using smaller, less powerful engines. "If you're really trying to maximize fuel economy, you really want to reduce horsepower as you cut weight," said Glenn Daehn,...

Automakers plan to use more aluminum over the next few years to meet higher fuel economy requirements, a trend that could send car prices higher. "The amount of aluminum that's used in cars is projected to double by 2020," said Alcoa spokesman Kevin Lowery. Federal fuel economy standards call for automaker fleets to average 34 miles per gallon by 2016. Last year, the U.S. fleet got about 23 mpg. Automakers say hitting the new numbers means cutting a lot of weight out of cars. Less weight means less of a load for the engine to move, immediately improving fuel economy. Car companies further boost those efficiency improvements by using smaller, less powerful engines. "If you're really trying to maximize fuel economy, you really want to reduce horsepower as you cut weight," said Glenn Daehn,...

THE Queensland Government has confirmed it will call an international tender for the development of the Aurukun bauxite resources in western Cape York, effectively snubbing the giant Chinese Aluminium Company (Chalco). Treasurer and Minister for State Development and Trade Andrew Fraser last night confirmed reports in The Courier-Mail that Chalco would not be the preferred developer of the bauxite mine. Chalco had believed it was the frontrunner to develop the leases but during her recent visit to China, Premier Anna Bligh shocked the Chinese by revealing she would seek other bidders for the development of what will be a $1 billion mine. The Treasurer said the original tender in 2005 to 2006 was based on bidders committed to develop the bauxite resource as a bauxite mine as well as a new...

THE Queensland Government has confirmed it will call an international tender for the development of the Aurukun bauxite resources in western Cape York, effectively snubbing the giant Chinese Aluminium Company (Chalco). Treasurer and Minister for State Development and Trade Andrew Fraser last night confirmed reports in The Courier-Mail that Chalco would not be the preferred developer of the bauxite mine. Chalco had believed it was the frontrunner to develop the leases but during her recent visit to China, Premier Anna Bligh shocked the Chinese by revealing she would seek other bidders for the development of what will be a $1 billion mine. The Treasurer said the original tender in 2005 to 2006 was based on bidders committed to develop the bauxite resource as a bauxite mine as well as a new...

The Saudi Arabian Mining Co (Ma'aden) has received commitment letters to cover the required $1bn commercial bank financing for the development of Ma'aden Bauxite and Alumina Co's bauxite mine and alumina refinery, Saudi Gazette has reported. The period of the loans is 16 years and will be paid in 21 half yearly installments starting from June 30, 2017, Ma'aden said. The bauxite mine and alumina refinery development, with an approximate cost of $3.6bn, comprises the second phase of Ma'aden Alcoa joint venture aluminium project

The Saudi Arabian Mining Co (Ma'aden) has received commitment letters to cover the required $1bn commercial bank financing for the development of Ma'aden Bauxite and Alumina Co's bauxite mine and alumina refinery, Saudi Gazette has reported. The period of the loans is 16 years and will be paid in 21 half yearly installments starting from June 30, 2017, Ma'aden said. The bauxite mine and alumina refinery development, with an approximate cost of $3.6bn, comprises the second phase of Ma'aden Alcoa joint venture aluminium project

The Manufacturing Index for June released by the U.S. Institute of Supply Management on July 1 was 55.3, much higher than the expected 51.8. Pessimistic market sentiment was therefore somewhat alleviated. Meanwhile, Greece will get its new round of capital bailout in July, which will help it avoid a default. As a result, the Euro continued its slight increasing trend, while the US dollar index met strong resistance at the moving averages and kept a slight downward trend to finally close at 74.283 points, down 0.3%. LME aluminum prices slightly rose to USD 2,542/mt on Friday as a result of strong SHFE aluminum price movements at the tail of trading. Later, LME aluminum prices slid twice due to heavy resistance, down as low as USD 2,500/mt. Despite the weakening US dollar index, LME...

Alcoa believes in American manufacturing and was proud to host President Barack Obama at our Davenport Factory. His visit showcased why we are bullish on U.S. manufacturing, exemplified by our 2,200 Davenport employees who create and produce the innovative materials that support Alcoa's global aerospace business. As President Obama pointed out, we are in a "renaissance of American manufacturing." Our future requires an investment in emerging technologies that will create manufacturing jobs across the country, ultimately enhancing our global competitiveness. This is why Alcoa applauds and is joining the President's Advanced Manufacturing Partnership (AMP). The AMP joins universities, businesses and the federal government to focus on creating jobs and increasing investment in U.S....

More than two years ago Qatalum, the state-of-the-art aluminium smelter built in line with Qatar's long-term economic diversification strategy sponsored an aluminium faculty chair position in the department of chemical engineering at Qatar University for a three-year period. The target was to strengthen Qatar University's capability to graduate qualified engineers, both Qatari nationals and expatriates, who would want to have careers in Qatar's aluminium industry. Dr Halvor Kvande was selected for this professorship, and since his appointment to the position two years ago, he has worked to create interest and enthusiasm for aluminium production among Qatar University's young BSc students. From the fall of 2009 to the spring of 2011 Dr Kvande has presented a course on Aluminium Production...

More than two years ago Qatalum, the state-of-the-art aluminium smelter built in line with Qatar's long-term economic diversification strategy sponsored an aluminium faculty chair position in the department of chemical engineering at Qatar University for a three-year period. The target was to strengthen Qatar University's capability to graduate qualified engineers, both Qatari nationals and expatriates, who would want to have careers in Qatar's aluminium industry. Dr Halvor Kvande was selected for this professorship, and since his appointment to the position two years ago, he has worked to create interest and enthusiasm for aluminium production among Qatar University's young BSc students. From the fall of 2009 to the spring of 2011 Dr Kvande has presented a course on Aluminium Production...

Commodity reported that aluminum remains negative in ongoing week as selling sentiment continues. Aluminum demand is weak these days. Mr Amrita Mashar commodity analyst said that “Technically, Resistance for Aluminum is at 114. Aluminum July contract opened at INR 112.60 and made low of 112 during today’s trading session. Aluminum future has dropped by 0.42% to INR 112 per kilogram. Mr Amrita Mashar said that “Buy Aluminum near 113.60 levels for target of 117 with SL of 111 while long term traders can wait till 119 as bottom fishing is expected in near term.”