
Kazakhstan's aluminium exports to the European Union (EU) reached 110,184 tonnes in 2025, generating EUR 274 million in revenue, according to the country's Ministry of Trade and Integration. The EU's share of Kazakhstan's total aluminium exports rose sharply from approximately 6 per cent to 54 per cent, highlighting the growing importance of the European market for the country's aluminium industry. However, the introduction of the European Union's Carbon Border Adjustment Mechanism (CBAM) is bringing new compliance requirements for Kazakh exporters, with carbon accounting, emissions verification and production modernisation emerging as key areas of focus. These challenges were discussed during a session held in Antalya, Türkiye, alongside the 31st Conference of the Parties to the UN...
Vedanta Aluminium Metal Limited (VAML) increased its renewable energy consumption by 63 per cent to 2,562.81 million units in FY26, while saving 635,757 MWh of energy through efficiency measures across its aluminium and coal mining operations. The company operates in Jharsuguda and Lanjigarh, as well as through BALCO in Korba. Its energy efficiency measures helped reduce emissions intensity by 11.4 per cent against the FY21 baseline, bringing it to 16.57 tonnes of CO₂ equivalent per tonne of aluminium. VAML also signed agreements for 493 MW of round-the-clock renewable power as part of its 2030 clean power target. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the...
Grow with
AL Circle

Roland Harings, Vice President of Global Automotive for Novelis, is bullish about the prospects for aluminium in the automotive industry, telling Automotive World's Automotive Megatrends magazine that he expects "a significant step change in the use of aluminium in the body-in-white now for the next five to ten years." Aluminium will grow from being "a niche material with a share in the body-in-white of about 1%", he says, to "3%, 4% or 5%. Beyond 2017, you can even imagine that we will have a share of 10% to 15% of the body-in-white materials supplied to the automotive industry." The company says it is expecting a growth in demand for aluminium in automotive applications of 25% CAGR (compound annual growth rate) over the next five years. Whilst this growth will be assisted by the...

Manufacturing components for the wind turbine industry have certainly come along way. With cost and efficiency driving concerns to the customer, manufactures have had to raise the bar to stay competitive. Hi Tech Controls is carying a new Flexible Aluminum POWERLINE ALU. This diesel locomotive (DLO) power cable is made of finely – stranded aluminum, making it much more flexible and easier to work with than its competition. Since Aluminums tendency to break is much lower, the cables reliability increased and the chance of power disruptions decrease due to damage caused by bending. The instillation advantage of the flexible Powerline ALU is that one length of cable can run from behind the drip loop in the down tower area directly to the inverter in the power base, reducing the splice count,...

Bauxite Resources Ltd, and its joint ventures has increased its overall JORC compliant bauxite resource base to 142.3 million tonnes with a new bauxite resource defined at the Bauxite Alumina Joint Ventures (BAJV) Cronus deposit approximately 15km east of Boyup Brook, Western Australia. This is the first bauxite resource defined in the Boyup Brook area by the BAJV. Further drilling in the southern tenements is currently underway, and planning for future exploration work is occurring although no immediate follow up work is planned for the Cronus deposit. BRL considers the JORC resource increases achieved over the last 12 months to be an excellent result that significantly improves the opportunities for the Company and its joint venture partners to develop bauxite mining operations in the...

Noranda Jamaica Bauxite Partners saw its third-quarter profit plunge on near historically low aluminium prices. The subsidiary of US-based Noranda Aluminum Holdings posted a profit of US$0.3 million ($27 million) for the three months to September 30, compared to US$6.8 million in the corresponding period in 2011. Lower bauxite prices, which are linked to LME prices for aluminium, the finished product derived from the red dirt ore, and increased shipping demurrage costs. "Our third-quarter 2012 results reflect LME levels which reached near historical lows during the quarter," said Layle "Kip" Smith, Noranda Alumina's president and CEO. "We are prudently managing our balance sheet and cost structure through the current LME environment. Persistent global macroeconomic concerns, particularly...

A-series five-axis HMCs from Makino are designed for high-speed, high-efficiency aluminum machining. The machines are well-suited for machining large, thin aerospace structural components including wing spars, wing panels and floor beams. The horizontal machining center family includes the A4, A8, A12 and A20, each intended for specific part lengths ranging from 4 to 20 m. The machines are equipped with a 33,000-rpm HSK-F80 spindle with a high-power output of 107 hp (80 kW). At peak power, the spindle can achieve chip removal rates ranging to 5,600 cm³/min. (300 in³/min.). Autonomic Spindle Technology (AST3) uses displacement sensors to monitor forces against the spindle. During machining, the data from these sensors is evaluated in real-time. If an unsafe load condition is detected, the...

The European Union imposed five-year tariffs on aluminum radiators from China to help Italian and Polish producers compete with cheaper imports. The duties as high as 61.4 percent punish Chinese exporters such as Zhejiang Guangying Machinery Co. for selling the radiators in the EU below cost, a practice known as dumping. European manufacturers including Italy’s Fondital SpA and Poland’s Armatura Krakow SA (ARM) have suffered “material injury” as a result of dumped imports from China, the 27-nation EU said today in Luxembourg. The five-year levies follow provisional measures introduced in May and will take effect after publication in the Official Journal by Nov. 11. Chinese exporters expanded their combined share of the EU market for aluminum radiators to 24 percent in the 12 months...

For shipments in the calendar month January 2013, the conversion price (plus LME) of 1050 alloy standard sheet will be increased by €35 per metric ton, or £30 per mt, while the same price for 5754 alloy standard sheet will rise by €65 per mt. For long-term supply agreements, an alternative solution is possible, either with variable price elements or with an additional security charge to cover further cost increases. "By taking this measure, we pass on costs that we cannot influence to the market," emphasizes Wolfgang Rempe, head of the General Engineering business unit. "Also in a challenging market environment, we aim to safeguard a short notice and flexible supply of our semi-finished products to Hydro's customers, thereby helping to reduce the operating capital bound across the entire...

Japan’s shipments of rolled-aluminum products dropped 2.5 percent in September, the second month of decline, an industry group said today. Supplies to domestic and export markets decreased to 158,835 metric tons last month from 162,913 tons a year earlier, the Japan Aluminium Association said in a report.

State-run National Aluminium Company's ( NALCO ) profit after tax is expected to grow by 40 percent year-on-year to Rs 195 core in the second quarter of FY13. Net sales are seen going up by 7.7 percent to Rs 1,705 crore from Rs 1,583.7 crore during the same period. Earnings before interest, tax, depreciation and amortisation (EBITDA) is likely to go up by 96 percent YoY to Rs 240 crore for the quarter. EBITDA margin is expected to be at 14.1 percent as against 7.7 percent in a year ago period and 15.98 percent in previous quarter. On quarter-on-quarter basis, net sales are seen going down by 0.8 percent, EBITDA down by 12.6 percent and profit after tax down by 12.60 percent. Factors: Net sales is expected to grow on higher alumina volumes despite lower realizations Alumina production is...

Emirates Aluminium (EMAL) hosted the latest meeting of the Gulf Aluminium's Environment, Health and Safety (EHS) committee on 16 and 17 October. The committee is chaired by EMAL and representatives from all the aluminium producers in the Gulf region were given a tour of the flagship industrial project and witnessed first-hand EMAL's 'Safety First, Last and Always' culture in action. Top of the agenda was an update on the forthcoming GAC Safety conference due to be held in Bahrain on 12 November 2012. Among the other items under discussion were: how to manage heat stress amongst workers, providing EHS leadership on the shop floor, the latest updates on waste management and a review of safety and environment performance indicators. Saeed Fadhel Al Mazrooei, President and CEO of EMAL, said:...

More than 1600 jobs will be on the line at BHP Billiton's Hillside and Bayside aluminium smelters in KwaZulu-Natal if Eskom gets its way in setting aside a controversial electricity supply deal. Eskom this week said it will refer the supply contract with BHP to energy regulator Nersa. The 25-year contract dates back to 1992 when SA had a power oversupply. But now Eskom wants it to be set aside, saying the cost to the utility is too high. The contract, which is confidential, links BHP's electricity tariff to the dollar price of aluminium. It has given BHP a significant discount on its tariffs, which led it to build the electricity-intensive smelters in Richards Bay in the 1990s. Eskom said the deal will cost it more than R5-billion over the life of the contract. "An increase in the cost of...

Spiraling bond yields in Spain and Italy aggravated borrowing costs and turned investors to the safety of the US dollar. The US dollar index was firm above 80 overnight as a result. The US economic data was mixed. Trading was even thinner as the US stocks market was closed on Monday and Tuesday because of the Hurricane Sandy. Investors are eyeing the US nonfarm payrolls due this Friday. LME aluminum extended losses in the European session. With high inventories and a firm US dollar, longs exited the market after taking profits, causing LME aluminum to tumble to a low of USD 1,887/mt, a two-month low. LME aluminum regained some losses at the tail of trading before finally ending the day down USD 19.8/mt or 1.03% at USD 1,905/mt. Latest LME aluminum inventories increased by 8,200 mt to...

Producers of primary aluminum billet have offered Japanese buyers a 30-70% hike in the 6063 billet upcharge for 2013 term contracts, from $150/mt for 2012, sources in negotiations said Monday. Negotiations between Japanese rolling mills, trading houses and overseas aluminum billet producers for 2013 contract premiums started earlier this month, buyer and seller sources confirmed. Two Japanese buyers said producers are asking for $50-100/mt raises in the billet upcharge, or fee for processing primary aluminum ingot into billet that contains more silicon and magnesium than 99.7%-purity aluminum. The 6063 billet, widely used for construction material, contains 0.2-0.6% silicon and 0.45-0.9% magnesium. Buyers said producers are asking for a major hike in Japan as upcharge levels in other...

With a decline of 0.5 percent on Oct. 26, 2012, the cash price of primary Indian aluminum recorded the biggest decline of the day. The aluminum 3-month price rose 0.2 percent on the LME to $1,936 per metric ton after a two-day drop. The primary aluminum cash price is back up, rising by 0.1 percent on the LME last Friday to close at $1,909 per metric ton. Chinese aluminum prices were mixed for the day. After remaining flat for three days, the cash price of Chinese aluminum fell 0.3 percent last Friday. For the fifth day in a row, the price of Chinese aluminum scrap remained essentially flat. The prices of Chinese aluminum billet and aluminum bar remained essentially flat as well.

The Supreme Court Monday asked the Odisha government to give details of the entry tax levied by it on raw materials and machinery equipment imported from outside the country by Vedanta Aluminium limited for its aluminium refinery and smelting plant. A bench of Justice DK Jain and Justice Madan B. Lokur today asked the state government to respond on a petition moved by Vedanta challenging the levy of entry tax on imported goods entering the state under Orissa Entry Tax Act, 1999. The Orissa Entry Tax Act, 1999 allows the state government to impose a tax, not exceeding 12 percent of the purchase value, on entry of goods for consumption, use or sale in the state. The government levies different rates for different goods. Vedanta, which has entry tax liability of about Rs 130 crore, has...

National Aluminium Company Ltd (Nalco) has ceased to draw costlier power from the Odisha grid. It will now rely on captive power. According to Nalco sources, the management took this decision to reduce the cost of power purchased, since it affected profitability in the second quarter ended September 30. Nalco reported a 98 per cent decline in quarter on quarter adjusted profit after tax in the quarter to September 30. “Profit during the quarter (Q2) as compared to preceding quarter is substantially lower due to increase in power and fuel cost by about Rs 108 crore and lower sales volume of alumina by Rs 101 crore arising out of lower production”, the company said. The lower output was due to non-availability of adequate power. Nalco spent Rs 7.15 a unit for power purchased from the grid...

Queensland Premier Campbell Newman says the Commonwealth is taking too long to consider a proposed bauxite mine expansion in the state's far north. Rio Tinto Alcan is seeking federal environmental approval for a $1.5 billion bauxite mine and port development at Weipa on western Cape York. The company plans to ship the product to Gladstone in central Queensland for processing into aluminium but the Federal Government is still assessing if that will impact the Great Barrier Reef. Mr Newman says the Federal Government is dragging its heels. "They do need to access bauxite coming out of the proposed South of Embley project," he said. "Given the significant investment that Rio Tinto have made to the refining process in Gladstone, I'd urge the federal Environment Minister to get behind South of...

A revolutionary technology that enables the recovery of aluminium from laminated pouches will be demonstrated for the first time on a commercial scale by the end of the year. Enval has chosen a site in Alconbury, UK which will house the commercial scale plant to showcase their patented process for the recycling of laminated plastic and aluminium packaging. The technology, backed by Kraft, Nestlé and Mondelez International, claims to be able to offer a recycling route for plastic and aluminium laminate that has to date been unrecyclable and ended up in landfill or being incinerated. The developer said it enables complete recovery of aluminium from pouches, laminate tubes and aseptic drink cartons. Running by 2013 The site is expected to be up and running by the end of the year and be...