
National Aluminium Company (NALCO) has signed an agreement with Russian aluminium producer RUSAL to study the recovery of scandium from red mud generated during alumina refining. The collaboration will focus on sharing technical knowledge and assessing technologies that could be used to extract the critical mineral from the residue. The MoU was signed on Tuesday, November 17, on the sidelines of the 44th International Conference and Exhibition of ICSOBA 2026 in Bengaluru. NALCO Chairman-cum-Managing Director Brijendra Pratap Singh, Director (Projects and Technical) Jagdish Arora, RUSAL Technical Director Viktor Mann and senior officials from both companies attended the signing. Explore the production, demand and consumption forecasts of bauxite and alumina in our report: " Global Bauxite...
Manaksia Aluminium Company Limited reported a year-on-year increase in net profit for the second quarter of FY2026-27, supported by an improvement in pre-tax earnings despite lower revenue. The Kolkata-based aluminium manufacturer also disclosed developments concerning a substantial GST demand, which it is contesting through an appeal. Manaksia Aluminium records higher profitability in Q2 FY27 For the quarter ended September 30, 2026, Manaksia Aluminium posted a net profit after tax (PAT) of INR 13.5 million (USD 140,000), compared with INR 11.1 million (USD 119,000) in the corresponding quarter of the previous financial year. The increase stands at a 21.7 per cent year-on-year improvement in profitability. However, the company’s revenue from operations declined to INR 1.248 billion (USD...
Grow with
AL Circle

Gulf Extrusions, a leader in extruded aluminum products, has announced that it has received the prestigious DNV (Det Norske Veritas) certification for the marine applications the company supplies, especially wrought aluminium alloys. The certificate reaffirms that all of Gulf Extrusions’ marine applications comply with DNV’s specific recognised standards. Modar Al Mekdad, general manager, Gulf Extrusions, said: “Adhering to the highest international quality standards has always been top priority at Gulf Extrusions, irrespective of the industry we are catering to.” “We are therefore honoured to receive this important certification from DNV, which underlines the quality of the wrought aluminium alloys that we supply to the maritime sector regionally and internationally. “Furthermore, this...

International Company plans to invest about $4 billion in the construction of alumina production complex at Zardalek deposit in Batken province. The executive director of Matrass Mining Group international company in Kyrgyzstan Azad Mikhailov stated at the meeting with the Plenipotentiary Representative of the Government in Batken province Zhenish Razakov, Spokesman for the Representative Mamadzhan Berdishev informed. According to him, the planned enterprise can process about a million of tones of ore per year. “Approximately 5,000 people will be engaged in the enterprise’s construction and its operation,” Azad Mikhailov said. He also noted that during the construction process, Matrass Mining Group company will make a choice in favor of wasteless, resource-conserving, ecologically save...

The largest alumina refinery in Europe, RUSAL Aughinish, which is located on the Shannon Estuary, plunged into the red last year as it racked up pre-tax losses of $10.4m (€7.68m). The business recorded the loss as revenues at the refinery dipped by $24m, or 2.5pc, from $610.57m to $586m in the 12 months to the end of December last (2012). The principal activity of the company is production and sale of alumina and separate figures provided by Aughinish Alumina to the Environmental Protection Agency (EPA) confirm output at the refinery was 1.924 million tonnes of alumina hydrate last year – a small increase over 2011 production levels. The plant extracts alumina from bauxite with around 70pc of the bauxite processed at the refinery coming from Guinea in Africa and the remainder coming from...

Before going on to international fame as the architect of the New York World Trade Center towers, Minoru Yamasaki designed a gem of a modernist structure in 1959 in Southfield to serve as a regional office for the Reynolds Aluminum Company. Located on the corner of Northland Drive and Northwestern Highway, this three-story building with an open design and central atrium, was hailed as an “ode to aluminum.” Atop the atrium, a skylight made of a series of pyramids floods the structure’s central core, while the glass walls of the upper floors are sheathed in light deflecting aluminum grills. Years later the Reynolds Building was converted to a health club and is currently for sale by LA Fitness. The building will be open for the Southfield Mid-Century Modern tour. Also open on the tour,...

Ess Dee Aluminium Ltd has informed BSE that due to some technical problems the dividend declared by the members at Annual General Meeting of the Company for the financial year ended March 31, 2013 will be paid on October 03, 2013 instead of October 01, 2013 through NECS facility of Payment and instrument paying dividend will be dated October 03, 2013 instead of October 01, 2013 as stated earlier.

UC Rusal Chief Executive Oleg Deripaska appealed to the new owners of the London Metal Exchange (LME), Hong Kong Exchanges and Clearing (HKEx), to think again on their proposals to force aluminum warehouses to release more metal than they take in, according to a recent Reuters article, saying “the intent of the HKEx to accelerate the transfer into the market of an additional 2 million tons of aluminum, accumulated and stored since the financial crisis, is an unprecedented intervention and one that Rusal strongly objects to.” The firm is worried the proposed rule changes would release a tsunami of aluminum into the market, distorting the supply balance and precipitating even lower prices. Strangely, it adds that the measures would lead to a less transparent marketplace – we’re not sure...

Shares of Noranda Aluminum traded at a new 52-week low today of $2.48. So far today approximately 254,000 shares have been exchanged, as compared to an average 30-day volume of 429,000 shares. Noranda Aluminum Holding Corp is an integrated producer of aluminum products, as well as rolled aluminum coils. The Company produces aluminum products in the form of billets, rods and sows, used mainly for building construction, architectural and transportation applications. Noranda also produces foil and light gauge sheet products from its rolling mills. In the past 52 weeks, shares of Noranda Aluminum have traded between the current low of $2.48 and a high of $6.97 and are now at $2.48. Over the past week, the 200-day moving average (MA) has gone down 2% while the 50-day MA has declined 2.7%....

A Petition from Australia Zoo owner Terri Irwin demanding a halt to a bauxite mine development inside the Steve Irwin Wildlife Reserve has fallen short, with Mines Minister Andrew Cripps saying it would be decided by "due process". Cape Alumina's Pisolite Hills project will begin construction within the massive reserve early next year if it can win proper approvals. In her petition, Ms Irwin - the widow of the iconic crocodile hunter - said the mining area including "irreplaceable waterways and unique biodiversity which will not recover after mining operations are finished". The 507 signatories did not move the government. In a response tabled to Parliament, Mr Cripps said the government would maintain the "highest standards of environmental practice and social responsibility" when...

LME aluminium is expected to extend its loss to $1,795 per tonne, as it could have resumed a preceding downtrend that developed from the Aug. 19 high of $1,949. The trend has been disrupted by a rebound from the Sept. 17 low of $1,775.50. This rebound will be totally reversed over the next few trading sessions. A Fibonacci retracement analysis on the rise from $1,775.50 to the Monday high of $1,860 reveals support at $1,818, the 50 percent level, which looks vulnerable following the sharp drop on Tuesday. The support at $1,808, provided by the 61.8 percent retracement, has been ignored as it may not work, simply because the support at $1,818 has caused a weak rebound. No information in this analysis should be considered as being business, financial or legal advice. Each reader should...

Markus M. Jessberger (52) who has been Event Director of ALUMINIUM, COMPOSITES EUROPE and HYBRID Expo since 2008 will leave Reed Exhibitions Deutschland at the end of this year to take up a new professional challenge near the home of his family in the Nuremberg region. He will be succeeded by Michael Köhler (34) who has been Project Manager of COMPOSITES EUROPE since 2008 and of ALUMINIUM since 2010. "From its beginnings in 2006, Markus Jessberger has made an essential contribution to the development of COMPOSITES EUROPE into one of Europe's most successful materials trade fairs. ALUMINIUM has likewise taken an extremely dynamic development under his direction, culminating in its recent move to Düsseldorf", says Hans-Joachim Erbel, CEO of Reed Exhibitions Deutschland GmbH. In connection...

Today, the aluminum die casting industry is trending in the right direction with the burgeoning demand of dies casting parts to be used in a number of industrial applications. China based BL Die Casting is the leading supplier of die casting parts made of aluminum. The company now announces to produce improved and high-quality die casting parts to help meet the needs of various industries. BL Die Casting invites industries to have a glimpse of their casting parts and compare it with other similar products to determine their quality and technical supremacy. The company maintains that the design intent is the key of these die casting parts which make them a perfect fit for different types of applications. According to a company representative, they always ensure the dimensional integrity of...

Russian aluminum giant Rusal has signed a memorandum of intent with the State Corporation Bank for Development and Foreign Economic Affairs, or Vnesheconombank, to jointly set up facilities to produce aluminum and aluminum alloy-based automotive components, rolled and cable products, the company said Monday. The finished goods would be supplied to the Russian market. Russian and foreign automakers, who have specific commitments to increase their share of Russian-made parts used by their facilities, will be among the potential consumers of such auto components, Rusal said in a statement. Under the agreement, Rusal will attract investors, provide them with the existing industrial infrastructure and ensure that aluminum is supplied to production sites. Vnesheconombank, in turn, will consider...

Sue Knaup of One Street, a US bicycle advocacy org, has created a robust shift lever & is seeking $10,000 on Kickstarter Sue Knaup, executive director of bicycle advocacy organisation One Street of Arizona, is seeking crowdfunding support on Kickstarter.com for her robust, repairable shift lever. A former bike shop owner, Knaup said: "I designed this bicycle shift lever after countless complaints from our partner organisations in all parts of the world. Programs that provide bicycles to people who need them for transportation, hauling goods and carrying their children can no longer find shift levers that hold up to hard use. They can choose from ridiculously complex and expensive shifters that are usually integrated with the brake lever or cheap shifters made of plastic and pot metal....

China’s aluminium prices are likely to fall in the fourth quarter, as supply is expected to rise amid sliding demand. Some analysts have predicted that the prices will fall to an all-time low. Traditionally, the fourth quarter has been a weak season for aluminium consumption, as cold weather in north China slows down construction activities. In north-west China, however, smelters who are able to operate at relatively low costs are still gearing up. Market participants have estimated that about 2 million tonnes of new aluminium capacity will start operations before year-end in China, with most coming from Xinjiang. Ample coal resources and cheap power in the area have allowed new aluminium capacities to emerge in recent years. Xinjiang’s aluminium capacity will reach 4 million tpy by the...

The Public Utilities Commission of Ohio voted on Wednesday to approve Ormet Corp's revised power deal with energy supplier American Electric Power Co Inc, saving the U.S. aluminum producer from likely closure. The commission added, however, that it was modifying parts of Hannibal, Ohio-based Ormet's request for a unique subsidized power arrangement, as it works to emerge from bankruptcy. PUCO Chairman Todd Snitchler said at the commission's weekly meeting, monitored by webcast, that approval was also contingent on Ormet employing at least 650 full-time workers through 2018. Ormet is the region's largest employer, as well as Ohio's largest energy user. In February, Ormet filed for bankruptcy protection. Cutting the high cost of energy to run its 270,000-tonne-per-year aluminum smelter was...

Slovak aluminium producer Slovalco and the country's dominant power producer Slovenske Elektrarne (SE) have reached an agreement on a new electricity supply contract, an important step towards keeping the aluminium smelter afloat, Pravda daily reported. Under the new contract, SE will supply a total of 19TWh of electricity to Slovalco for a period of eight years starting from January 2014 at discount prices, which were not disclosed. Slovalco's current electricity supply contract at fixed prices with SE expires at the end of 2013. The aluminium producer has previously said that if it buys electricity at market prices this would threaten the viability of its operations. Slovalco is majority owned by Norwegian aluminium supplier Hydro with a 55.3% stake, while Slovak company ZSNP SCO holds...

Alcoa Inc. will benefit from “a once in a lifetime shift” by the auto industry toward using more aluminum in its best-selling vehicles, CEO Klaus Kleinfeld said on Monday. “The big change is, aluminum has a leg up” on steel, Kleinfeld said in Alcoa's Corporate Center on the North Shore during the company's 125th anniversary celebration. Though aluminum always had an advantage because of its lighter weight, “automotive firms were not ready to switch over for full-scale production, particularly with their volume cars,” he said. They are now, as they gear up to meet the government's 54.5 mpg target by 2025 with lighter-weight materials. Alcoa, the nation's largest aluminum company, is building three plants to produce body sheet for the auto industry — in Davenport, Iowa, which will go online...

Trimet Aluminium SE has concluded the financial year 2012/2013 with sales of 1.2 billion euros (previous year: 1.3 billion). With an annual result of 1.7 million euros, the medium-size company returned to the profit zone. Despite the slight decline in sales the material specialist experienced a sustained good order situation, especially in the automotive sector. Production at Trimet with 1924 employees at all its locations was close to the 500,000 tonne capacity limit. In the course of the current financial year the family-owned company is further expanding its automotive division, and with the takeover of two plants in France, it intends to open up new business areas. The slight decline in sales compared to the previous year can be explained by the recent low international aluminium...