
Aluminium Bahrain B.S.C. (Alba), the world's largest aluminium smelter on one site, reported a 72.5 per cent year-on-year (YoY) decline in profit attributable to equity holders to BD18.5 million (USD 49.3 million) in the third quarter of 2026, compared with BD67.3 million (USD178.9 million) in Q3 2025. The decline came amid lower production availability and regional shipping and logistics disruptions, although the company reported improving operational stability during the quarter. Basic and diluted earnings per share stood at 13 fils in Q3 2026, against 48 fils in the corresponding period of 2025. Total comprehensive income attributable to equity holders also declined by 69.6 per cent YoY to BD20.5 million (USD54.5 million), compared with BD67.5 million (USD179.4 million) a year earlier....
India's aerospace and defence sector is expected to drive growing demand for specialised aluminium alloys, creating opportunities for domestic manufacturers such as Remal Alcast Pvt. Ltd. The company is expanding its high-performance aluminium billet manufacturing capabilities in Maharashtra, having recently completed its 1,000th billet cast as it progresses towards a planned annual production capacity of 72,000 tonnes. Remal began manufacturing aluminium billets in 2025 at its integrated casthouse in Vile Bhagad, Maharashtra. The facility produces billets across the 1xxx, 2xxx, 3xxx, 4xxx, 5xxx, 6xxx and 7xxx alloy series and operates under AS9100D, ISO 45001, ISO 14001 and ISO 9001:2015 certifications. Rather than concentrating on commodity-grade billet production, Remal is building its...
Grow with
AL Circle

Rexam, the British aluminum can maker, said on Thursday that it was in talks to potentially be acquired by Ball Corporation in a deal that would value it at 4.29 billion pounds, or about $6.5 billion. The deal, if consummated, would combine two of the world’s largest makers of beverage cans. Rexam said the cash-and-share bid by Ball values the company at £6.10 a share. The bid consists of two-thirds in cash and one-third in new shares issued by Ball, Rexam said. Shares of Rexam jumped 23 percent to £5.50 in afternoon trading Thursday in London. Its shares traded as high as £5.75. “Discussions on other matters are continuing and there can be no certainty any formal offer will be forthcoming, or as to the terms of any offer,” Rexam said in a news release on Thursday. Rexam, based in London,...

In the first ten months of the current Iranian calendar year, that is from March 21, 2014 to January 20, 2015, the country produced 293,595 tons of ingots, adding 30,595 tons in the month of December, 2014. These figures show a rise of 893 tons when compared to the production output seen last year says the Iranian Mines and Mining Industries Development and Renovation Organization (IMIDRO). Of the total aluminium produced, 51.4% was produced by Iranian Aluminium Company with 151,163 tons, Almahdi Aluminium Company came second with 80,147 tons while Hormozal contributed 62,285 tons to the total production. Iran being one of the top ten mineral-rich countries of the world produced a healthy amount of alumina with 209,558 tons exceeding last year’s amount of 205,532 tons although none of it...

The Pahang State government has announced that the Jalan Gebeng bypass will only be used to transport bauxite and iron-ore to the port, effective from 4th February, 2015. The decision was taken after a discussion with 106 entrepreneurs related to the industry to solve the issue of dirty roads caused by the bauxite loaded lorries in the port and Gebeng industrial areas, said the state minister Besar Datuk Seri Adnan Yaakob. Entrepreneurs will no longer be allowed to keep storages in the port or the Gebeng areas and state has given a two-month notice to the entrepreneurs to clear out the seven storage sites located in the areas, as decided in a closed door meeting held at Yayasan Pahang. New bauxite storage areas need to be sought by the entrepreneurs and the government has assured they too...

For the sixth year in a row, Gershow Recycling opened its Medford, New York, scrap metal processing facility to local high school robotics teams participating in the School-Business Partnerships of Long Island’s (SBPLI) upcoming Long Island Regional FIRST (For Inspiration and Recognition of Science and Technology) Robotics Competition. A total of 15 high school robotics teams took advantage of the program and visited Gershow Recycling for free scrap metal. Some of the highlights of the program are the following: • Members of the Townsend Harris High School’s robotics team will use 162 pounds of aluminum scrap and their kit of parts to help them build a robot. • Members of the Longwood High School robotics team will use 26 pounds of aluminum scrap and their kit of parts to help them build...

A total of 1,550 workers would be added to the workforce for building the new aluminium F-150 pick up truck as announced by Ford Motors on Wednesday. Ford also says that nearly 300-500 union-represented workers will be promoted from the entry-level stage to the veteran worker stage giving a considerable boost to their wages by the end of the first quarter, a first for the company. Ford, along with two other major U.S. automakers had reached an agreement with the United Auto Workers union in 2007 that underlined the wage terms for the workers. According to the agreement, new entry-level workers would be paid a lower wage than veteran UAW union workers in order to stay competitive with the automakers of the world. 900 out of the 1,550 jobs would be for the Ford’s truck plant in Kansas City...

A delegation from the European aluminium industry today met with European Commission Vice-President for the Energy Union, Maroš Šefcovic. Following the high-level discussions, EAA Director-General Gerd Götz issues the following statement: “To meet fast-growing demand for aluminium in key end-use markets and maintain its leadership in innovation and sustainability, the European aluminium industry needs a functioning energy market. Examining the detail of a ‘fit-for-purpose’ Energy Union, we engaged with Vice-President Šefcovic on how to address unsustainably high energy costs, long term predictability and ensure competitive energy prices for industry. We also focused on mechanisms for full compensation of ETS indirect costs, which is an economic imperative for aluminium producers...

The aluminium market faces the prospect of a growing surge of supply from China this year that could disrupt expectations of a global deficit. A divergence in prices between China and the rest of the world could spur exports and limit aluminium’s price gains this year, analysts say. A falling rouble that has improved the competitiveness of Russian smelters could also prompt more supply. At $1,765 a tonne, the London Metal Exchange price for three-month delivery of aluminium has risen 1.4 per cent this year, the best performing base metal on the exchange. Consultancy CRU forecasts a global deficit of 600,000 tonnes this year but a 1m tonne surplus for China. The difference in prices has driven exports of fabricated forms of the metal, as companies lobby the government for a lifting of...

Japan's aluminium premiums are likely to stay at a record high level of $425 per tonne throughout this year, supported by higher U.S. spot premiums and tight global supply, outside of China, Japanese trading house Sumitomo Corp said. Japan is Asia's top aluminium importer and the premiums for primary metal shipments it agrees to pay each quarter over the London Metal Exchange (LME) cash price set the benchmark for the region. "I don't think Japan's premiums will fall sharply this year as U.S. premiums are about $100 above Japan's level and global supply excluding China is fairly tight," Shingi Yamagiwa, manager of Sumitomo's light metals trading team, told Reuters in an interview on Thursday. Japanese premiums have risen for five quarters, hitting a record high of $425 per tonne for...

Alcoa seeks tax break extensions for the last two Alcoa plants remaining in Washington, one in Ferndale and Wenatchee, which employ a total number of 1,100 people. The number of aluminium smelters and the number of people employed in them have dropped drastically since 1980 when there were 10 smelters at one point employing roughly 10,000 people. Members of the Alcoa plants including managers and workers along with representatives from the Chambers of Commerce of Ferndale and Wenatchee regions approached the House Technology & Economic Development Committee on Tuesday to plead the tax break extension bill. The Bill is fairly standard with a few inclusions. Since the Legislature has become stricter about putting job-related targets, a provision has been added which states that the company...

Bauxite Resources Limited refers to the market announcement “Positive Export DSO Bauxite Scoping Study Results Received For 100% Fortuna Project” released to the ASX on 21 January 2015 (the “previous ASX Release”). The Company wishes to provide the following further clarification. The purpose of the scoping study was to provide an early and preliminary assessment of the viability of the Fortuna bauxite project, and to assess infrastructure and transport solutions. The Company wishes to make it clear that it is unable to make any production forecasts at this point in time, and the previous ASX release must not be interpreted as providing any production forecasts. The JORC Code 2012 compliant mineral resources underpinning the scoping study are in the Indicated (15%) and Inferred (85%)...

Sapa AS, a Norwegian manufacturer of extruded aluminium profile and a 50/50 joint venture owned by Orkla Group and Norsk Hydro announces results for the fourth quarter 2014. Underlying EBIT for Sapa declined compared to the previous quarter, mainly due to lower seasonal demand. Underlying EBIT for Sapa increased compared to the same quarter previous year due to stronger North American demand, improved margins, improvement programs and restructuring activities in Europe. Global automotive demand has supported the precision tubing results. Results for the fourth quarter 2013 included charges related to impairment of inventories and accounts receivables. The restructuring program initiated by the company in 2013, targeting annual synergies of around NOK 1 billion by the end of 2016, is ahead...

River Metals Recycling (RMR), headquartered in Crescent Springs, Kentucky, has announced that its Owensboro, Kentucky, scrap metal recycling facility has received the SHARP (Safety & Health Achievement Recognition Program) designation from the U.S. Department of Labor. RMR says that the Owensboro facility is the company’s second in Kentucky to receive the award. The facility was recognized for its commitment to creating and maintaining a safe and healthy workplace. RMR’s Newport, Kentucky, facility received SHARP designation in late 2013. In receiving the recognition, Bob Eviston, RMR’s president, thanked the employees of the Owensboro facility for their contribution to the company’s success and for operating for six straight years without any work-related injuries or illnesses....

Aluminium recycling business Alutrade has replaced a six-year-old Mercedes Atego with a new Euro 6 version, after experiencing high reliability from the previous truck. Supplied by dealer Midlands Truck & Van, the Oldbury-based operator's Atego 1224 is powered by a 238bhp OM936 six-cylinder engine. It is fitted with Multilift hook-loading gear and will tow a drawbar trailer, collecting waste aluminium from across the UK. Alutrade's ClassicSpace cab vehicle drives through the Mercedes Powershift 3 automated transmission and features a reworked chassis, rear suspension, cab mounting and steering system. Although weight is rarely an issue with aluminium scrap, Alutrade has opted for a larger engine size, as managing director Chris George explains: "We've opted for a slightly bigger engine...

It appears to have been worth the wait for US car maker Ford. The company got off to a better start in its domestic market in 2015 than expected, thanks in part to a revamped version of the F-150, which has been the best-selling vehicle in North America for just over 3 decades. Ford's sales had lagged those of rivals in the second half of last year as a new version of the pick-up truck made of aluminium, rather than steel, was developed. Sales of the F-150 reached 54,370 last month, up 17 per cent from a year earlier and the pick-up truck's best showing for the month of January since 2004. Erich Merkle, an analyst at Ford, said: Momentum is especially strong for our F-Series pickup, with the all-new F-150 the hottest product on our dealer lots in January. The company's overall sales...

The ET Foundation, the educational and scientific organization devoted to promoting and advancing aluminum extrusion processes and technologies, and Bonnell Aluminum are seeking entries for the 2015 International Aluminum Extrusion Student Design Competition. Scholarships in the form of cash awards will be presented to the top designs. Bonnell Aluminum will be the sole sponsor for the cash awards, totaling $8,500. This is the first year Bonnell Aluminum is sponsoring the Aluminum Extrusion Design Competition. The aim of the competition is to promote the understanding and use of extruded aluminum profiles, as well as highlight innovations and recognize excellence in aluminum extrusion design. Students studying design and engineering at universities, colleges, and schools around the world...

United Co. Rusal, the world’s largest aluminum producer, will keep 700,000 metric tons of output it idled in 2013 and 2014 permanently shut, helping to buoy prices of the metal. “We cut production to 3.6 million tons last year and we are not planning to reopen the mothballed capacity, regardless of the price,” Chief Executive Officer Vladislav Soloviev said in an interview in Moscow this week. “Those plants were the least effective among our assets, so we are dismantling them now.” Aluminum prices rose about 13 percent in the last year, and the market, excluding China, expanded by 7 percent. Rusal sees similar growth this year, with a deficit outside the Asian nation of about 1.1 million tons. The company, which had annual capacity of 4.5 million tons before idling plants, doesn’t expect...

Press Metal Bhd is looking at a 10-15 increase in aluminium production by year-end as phase two of its smelting facility in Samalaju Industrial Park, Sarawak, is running at full capacity. Group Chief Executive Officer Datuk Paul Koon Poh Keong said the higher production was due to the expansion of its Samalaju smelter plant which was currently producing about 320,000 tonnes of aluminium. "Higher production was boosted by Samalaju's plant which is now operating at full capacity and we are also in the middle of expanding into phase three, which is expected to be operational by the last quarter of 2015," Koon told reporters after the company's extraordinary general meeting here Wednesday. He said a capital expenditure (capex) of RM2 billion has been allocated for phase three and two-thirds...

Hydro and SGL Group have launched a three-year project aiming to tap further energy saving potentials in the primary aluminum production process. Building on each other’s technological strengths and know-how, the companies are joining forces to develop a new cathodic solution for this purpose. • Launch of three-year project, funded by The Research Council of Norway’s ENERGIX program • Hydro and SGL partnering in the development of cathode technology • Potential for significant energy savings in future primary aluminium production Using novel materials and a new electrolysis cell design, the solution will enable a significant reduction of the anode-cathode distance, one of the main drivers of energy consumption. If proven successful, the new cathode technology may lead to substantial...