
India's aerospace and defence sector is expected to drive growing demand for specialised aluminium alloys, creating opportunities for domestic manufacturers such as Remal Alcast Pvt. Ltd. The company is expanding its high-performance aluminium billet manufacturing capabilities in Maharashtra, having recently completed its 1,000th billet cast as it progresses towards a planned annual production capacity of 72,000 tonnes. Remal began manufacturing aluminium billets in 2025 at its integrated casthouse in Vile Bhagad, Maharashtra. The facility produces billets across the 1xxx, 2xxx, 3xxx, 4xxx, 5xxx, 6xxx and 7xxx alloy series and operates under AS9100D, ISO 45001, ISO 14001 and ISO 9001:2015 certifications. Rather than concentrating on commodity-grade billet production, Remal is building its...
Rio Tinto has marked a new construction milestone at its Kangwinan bauxite project in Queensland, a major development expected to replace production from the ageing Andoom mine and help offset the planned closure of Gove in 2029. A groundbreaking ceremony at the USD 1.9 billion development near Weipa follows Rio Tinto's investment approval in October. The project is expected to add 20 million tonnes of annual bauxite production capacity, taking Weipa's overall capacity to approximately 44 million tonnes per year. First production is targeted for 2029, with full production expected by 2032. Kangwinan will establish a new bauxite production centre approximately 15km south-east of Rio Tinto's existing Amrun mine. The development forms part of the company's efforts to maintain production in...
Grow with
AL Circle

The statistics released by the Aluminum Association indicates that the new mill orders for the month of March 2015 have increased significantly by nearly 10% from the same month a year ago. The orders jumped 6.6% from Feb ’14 levels. The year-to-date new mill orders index was up by 7.0% in 2015. New orders for plates have declined by 10.3% in March this year when compared with the same month a year ago. The Mar ‘15 plate orders were also down by 5.8% from January levels. The heat-treatable sheet orders during the month of March this year surged higher by 125.7% from Mar ’14. Also, the orders climbed higher by 14.4% over the previous month. Non-treatable sheet orders were up by 7.7% year-on-year, but declined marginally by 0.2% from the previous month. New orders for extruded products and...

Electricity demand would require about a decade to recover back to present levels, if the Tiwai Pt smelter in Southland closed, a government report says. New Zealand Aluminium Smelters (NZAS) is the largest single electricity user in the country, accounting for almost 13 per cent of national electricity usage in 2013. NZAS and Meridian Energy agreed a new power deal in August 2013, which included Meridian cutting its electricity charges, after a lengthy standoff was ended with the help of a $30 million Government subsidy. However, the smelter can terminate the contract completely from January 2017 provided it gives 15 months' notice. The smelter is complaining that it pays some of the highest prices for power in the world and wants a better deal, yet again. A Ministry of Business,...

Aluminium stocks held at three major Japanese ports climbed for a 12th month to hit a record high at the end of March due to high level of imports and slow housing sector demand. The increase came as a surpise as Japanese buyers have reduced purchase volumes of January-March deliveries and some firms made efforts to cut inventories ahead of the end of the 2014 fiscal year. For many Japanese companies, the business year ends on March 31. "We were surprised to see another month of increase as traders and users were trying to reduce stocks by the end of March," said a trader. Aluminium stocks held at Yokohama, Nagoya and Osaka grew 0.8 percent in March from a month earlier to 457,000 tonnes, Marubeni Corp said on Monday. The trading house collects data from those key ports. That broke the...

Outotec to deliver technology to aluminum smelter in the United Arab Emirates. Outotec has been awarded an order by Emirates Aluminium Company Limited PJSC (EMAL) to deliver anode carbon plant technology for an expansion at EMAL's aluminum smelter complex at Al Taweelah in Abu Dhabi. The contract value exceeds EUR 10 million, which has been booked in Outotec's first quarter order intake. Outotec will provide the technology, engineering, supply and installation of equipment and systems for the expansion of EMAL's existing green anode plant. After the expansion, scheduled to be commissioned in mid-2016, the plant will be capable of producing considerably larger anodes, which are required for EMAL's ongoing efforts to increase the amperage and thus the output of the electrolysis. "Outotec...

President John Dramani Mahama on Tuesday gave the assurance that government would do everything under its purview to revive the Volta Aluminum Company (VALCO) to take its rightful position in the smelting of alumina in the country. He said he had directed the Ministry of Power to make available all excess power to VALCO as soon as the current challenges were stabilized. President Mahama gave the assurance when he paid a working visit to the company to ascertain its current operational levels. He was accompanied by Dr Kwabena Donkor, Minister of Power and Dr EKwow Spio-Garbrah, Minister of Trade and Industry, among other dignitaries. President Mahama, who earlier inaugurated the Enclave Power Company substation in Tema, said VALCO which was the flagship project of the late President Kwame...

All-aluminium frame will reduce truck weight by over 40 percent compared to steel frames, saving nearly 408kg per vehicle, increasing fuel efficiency and payload. Lightweight, high-performance metals company Alcoa, in collaboration with Metalsa, a global supplier of light and commercial vehicle and chassis structures, recently displayed a lightweight, all-aluminium commercial truck frame at the Mid-America Trucking show in Louisville, Kentucky. Still under development, the lighter weight frame will reduce truck weight by over 40 percent compared to steel frames, saving nearly 900 pounds (408kg) per vehicle, increasing fuel efficiency and payload. Additionally, the frame’s increased stiffness will double rigidity, enabling a smoother ride. The aluminium frame also offers superior corrosion...

Emirates Global Aluminium, EGA, will join industry professionals from around the world at ALUMINIUM Middle East 2015, which takes place from 14th to 16th April at the Dubai International Convention and Exhibition Centre. As a participant in the exhibition since it was launched in 2009, formerly through its core operating subsidiaries Dubai Aluminium , DUBAL , and Emirates Aluminium , EMAL , the EGA will leverage ALUMINIUM Middle East 2015 to showcase the company?s regional and global leadership. The event will gather 3,000 industry professionals from 70 countries around the world and will highlight the Middle East?s future role as the world?s powerhouse in aluminium production. ALUMINIUM Middle East 2015 will also facilitate discussions on uplifting the downstream sectors to support the...

PanAsialum Holdings is planning to spend 200 million yuan ($33 million) in building an aluminum processing project in Xinjiang, finance.sina.com reported yesterday. The company will build 300,000-tpy high-end aluminum extrusion bar project and 50,000-tpy high-end flat-rolled aluminum project, it added. Construction is scheduled to be completed within one year and a half.

South Africa’s automotive sector is currently one of the key drivers of aluminium demand in the country, which stakeholders attribute to the global trend of manufacturers using an increasing amount of aluminium for vehicle components, particularly for passenger vehicles. As a result, aluminium foundries are starting to pursue advanced technologies and techniques in their processes, says aluminium industry representative organisation the Aluminium Federation of South Africa (Afsa). “Aluminium weighs a third of the weight of steel; it is extremely corrosion-resistant and can be made as strong as steel with advanced foundry techniques,” explains Afsa executive director Mark Krieg, noting that Germany-based car manufacturer Mercedes Benz’s C-Class was the first car built in South Africa using...

Automotive pistons are in demand as vehicle production climbs, but the trend is not without its challenges as a there is a growing shift in popularity to electric cars and smaller engines with fewer cylinders per vehicle. Newer technology can leave engines like this inline 6-cylinder design in the history books. For key companies in the industry like Mahle GmbH (Germany), Aisin-Seiki Co. Ltd. (Japan), Rheinmetall AG (Germany), Hitachi Ltd. (Japan) and Federal-Mogul Corporation (U.S.) the consumer trend toward electric cars could force piston engine manufacturers to improve efficiency or fade into the past. China, South Korea and India are the main contributors to the growth of the automotive piston system market in the Asia-Oceania region where many OEM’s are expanding to meet huge...

Inner Mongolia Datang International Renewable Resource Development Co. produces 110,000 tonnes of alumina each year using coal ash, a waste generated during thermal power generation, local media reported yesterday. The company’s subsidiary, Datang Tuoke Power Plant, generates over 4 million tonnes of coal ash annually, providing sufficient raw materials for alumina production.

Credit Suisse upgrades Alumina AWC to "outperform" from "neutral" and says "it is our preferred ASX100 mining exposure". "Alumina fundamentals are much better than iron ore and AWC is moving into a strong dividend paying position with a yield of 8 per cent in CY15 rising to 13 per cent in CY17. "We downgrade BHP Billiton from "neutral" to "underperform". Embedded oil prices are far more bullish relative to other commodity prices and although capex can and likely will be cut further, this will increasingly come at the expense of future growth. "We downgrade Fortescue Metals Group FMG from "outperform" to "neutral". On our iron ore forecasts it will need to cut capex to the bone, cut costs further and drop the dividend."

China’s State Council decided last week to cut power rates for industrial and commercial users by an average 0.018 yuan ($0.00294)/Kwh. Some 70% of China’s operational aluminum capacity relies on captive power plants and are thus unaffected by these tariff adjustments, SMM understands. Smelters that source power directly from power plants will similarly be unable to benefit from these tariff cuts. It remains to be seen whether those that have already been receiving preferential power rates will qualify for the tariff cuts. Aluminum smelters that do qualify for the tariff cuts are already suffering from high production costs, with 20% of China’s operational aluminum capacity suffering losses in cash costs at current prices, SMM data showed. Therefore, this cut in power tariffs will slow...

Bank of America Merrill Lynch has cut its this year price forecast for aluminium to $1,800 a ton and remained unchanged for 2016. Bank of America Merrill Lynch previously mentioned that gold prices to average $1,818 a ton this year and $1,850 a ton for next year. Aluminium has been among the best performing metals since the beginning of 2014. Of course, this was heavily influenced by substantial output curtailments from operators in World ex-China. Yet, exports of semis from China increased in recent months, halting the rally on LME. While the aluminium market in World ex- China remains in deficit, we remain cautious until Chinese product shipments subside. Meanwhile, trading on LME is normalising, which has pushed premia lower. Premia remain above fair value, so Bank of America Merrill...

AlCircle has the pleasure of being a part of Aluminium Middle East 2015 exhibition as a media partner and exhibitor. AlCircle has been actively associated with the Aluminium Exhibition for last 5 years as media partner. Aluminium Middle East 2015 is the biggest gathering for aluminium professionals and the leading exhibition for aluminium products, technologies and investments in the Middle East. Launched in 2009, the event brings together international industry front-runners including producers, manufacturers and processors of raw materials and end products made with aluminium components, as well as suppliers of technologies and accessories for aluminium production, processing and refinement. In its 4th edition, Aluminium Middle East 2015 gathers 180 exhibitors from 25 countries and over...

Aluminium shipments from China, which climbed 43 percent in the first quarter, have probably peaked in the near term as the country’s sustained production dragged down prices, according to CLSA Ltd. Exports of unwrought aluminium and aluminium products rose from a year earlier to 1.21 million metric tons in the January-March quarter, according to a statement released by the General Administration of Customs on Monday in Beijing. Shipments shrank 15 percent in March to 360 000 tons from the previous month, according to customs, as prices fell for a second month. China, producer of about half the world’s primary aluminium, continues to add capacity, while smelters elsewhere struggle to cut enough supply to buoy prices. The surcharges that consumers pay to obtain the metal are falling from...

Aluminium Bahrain B.S.C. (Alba) held recently a Management meeting review to give an update on the status of Line 6 expansion project. Alba has been actively focused on the expansion project lately. The construction phase is due to take place upon obtaining Board, Shareholders as well as other Regulatory approvals and it will be expected to wrap-up after 3 full years. Alba’s sixth production line is expected to add around 400,000 metric tonnes to its existing capacity bringing Alba’s total production capacity to 1.3 million tonnes per annum. Commenting on Line 6 expansion project, Shaikh Daij Bin Salman Bin Daij Al Khalifa said: “We are optimistic about the future growth prospects from Alba’s sixth production Line. This new landmark will make Alba one of the largest single site smelters...

ALUMINIUM Middle East is the biggest gathering for aluminium professionals and the leading exhibition for aluminium products, technologies and investments in the Middle East. Launched in 2009, the event brings together international industry front-runners including producers, manufacturers and processors of raw materials and end products made with aluminium components, as well as suppliers of technologies and accessories for aluminium production, processing and refinement. In its 4th edition, ALUMINIUM Middle East is taking place IN Dubai and the gathering is going to host 180 exhibitors from 25 countries and over 4,000 industry professionals from 70 countries. The exhibition, which will be held under the theme of ‘Forging Connections Building Possibilities’, will help the aluminium...