
The British Aerosol Manufacturers’ Association (BAMA) is asserting its presence across the UK aerosol industry with a refreshed tagline and two new board appointments. After its annual general meeting on 21 October, the association adopted the name ‘BAMA – The UK Aerosol Association’ , indicating its expanding membership across the aerosol supply chain while retaining the internationally recognised BAMA acronym. Patrick Heskins, Chief Executive of BAMA, stated, “The revised tagline is a natural evolution that offers greater clarity on who we represent, provides a basis for future growth,” while preserving the recognition built around its established name. The AGM also saw the election of René Davidsson of Beiersdorf and Dave Phillips of Reabrook to the Board of Directors. To learn the...
Arab Aluminum returned to profitability in the first nine months of 2026, recording a net profit after tax of EGP 11.42 million (USD 212,730) compared with a loss of EGP 6.60 million (USD 122,944) in the corresponding period last year. Lower finance expenses, higher foreign exchange valuation gains and increased sales volume supported the improvement. According to a financial disclosure submitted to the Egyptian Exchange, the company's sales reached EGP 448.68 million (USD 8.36 million) between January and September 2026, compared with EGP 443.07 million (USD 8.25 million) in the same period of 2025. This represented an increase of approximately 1.3 per cent. To know the global production, demand and consumption forecasts of aluminium extrusions, explore our report "The World of Aluminium...
Grow with
AL Circle

A recently published report on global aluminium extrusion market says increased usage in green initiatives is driving great growth as aluminium extrusions are 100% recyclable and emit no significant hazardous gasses during processing. The growth of the automobile industry is anticipated to drive the growth of this market during the forecast period. Aluminium extrusion is replacing steel in automobiles and transport. It is preferred over other metals due to its light weight leading to reduced fuel consumption and reduced greenhouse gas emission. Moreover, aluminium is easily recyclable and resistant to corrosion, thus ensuring sustainability and durability of the vehicle. Aluminium extrusion market is segmented based on Mill finished, Anodized and Powder coated varities. The mill finished...

Revised packaging recycling targets put forward by the EU Commission on 2 December, show a move to capture more aluminium cans and to streamline compliance reporting. The Commission has put forward staggered packaging recycling targets of 65% by 2025 and 75% by 2030. Under the objectives, producers will be required to reuse or recycle a minimum of 75% by weight of all packaging waste used. Targets for individual waste streams include 75% for wood and 85% for ferrous metal, glass, aluminium and paper and cardboard. In comparison, Janez Potocnik’s 2014 package floated proposals for an 80% packaging recycling target by 2030 – including a 90% target for paper and cardboard. The Commission notes that targets for ferrous metals and aluminium packaging should be split. It reasons that the...

Leading auto aluminium sheet supplier Hydro announced the regional government of Düsseldorf had approved its new rolled products facility in Grevenbroich. The official opening of the facility is scheduled in 2017. "This is a major project that's advancing all the time and remains on time and on budget. It will deliver its first products before the end of 2016, helping us to meet growing demand from our customers in the automotive industry," said plant manager Christoph Budde. The new production line for lightweight automotive aluminium sheet is designed to use less electricity and gas than comparable systems during operations. Post extension, production capacity will go up from 50,000 to 200,000 tonnes a year. The new buildings comprising a 30m high, 100m long high bay warehouse and a...

Lufthansa, Germany’s largest airline, and Warsteiner, one of Germany’s largest and privately owned breweries, have had a close relationship for many years. 2015 marked Lufthansa’s 60th anniversary and so Warsteiner congratulated them with a limited edition aluminium beer bottle. A key decision for Warsteiner was how to present its limited edition product for such an important milestone in the history of one of Germany’s most iconic brands, so they turned to one of its most trusted packaging suppliers, Ardagh Group. In 2014 Ardagh developed an exciting range of aluminium bottles - the Warsteiner Art Collection. These bottles were created at the state-of-the-art printing facility in Beaurepaire, France. The resulting launch attracted many new younger customers from around the world to the...

National Aluminium Company (Nalco), the country's largest state run aluminium producer is drawing up a focussed policy to step up its share of procurement from local businesses in its home state of Odisha. "We are already procuring goods and services worth INR 400 crore from MSMEs every year. Now, we are coming up with a focused policy to procure more from Odisha-based MSMEs, T K Chand, CMD, Nalco has said. "As an industry leader, if we want to chart a course of success, we have to take the ancillary industries along with us," Chand said while speaking on the sidelines of CII's Enterprise Odisha at IDCO Exhibition Ground on Tuesday. Citing the example of US-economy, Chand pointed out that in the US, the main yardstick of evaluating economy is employment generation. "We can generate more...

As the energy sector begins to face new challenges, the importance of aluminium is growing. In order to fully harness its potential, it is important that the industry not only take daring new approaches but also bolster winning formulas already in place. Annually, Qatalum, Hydro and Qatar University join hands in developing and supporting competence in aluminium production, application and research in Qatar. This year is no different. On December 14th, between 7:30 am and 2:00 pm, Qatalum will participate at the Annual Aluminium Symposium at the InterContinental Hotel in West Bay. The Symposium is themed around 'The Engine for Growth in the Region' wherein various papers and presentation will be made by distinguished professionals within the field on topics related to production, usage...

MEDTEC Japan 2016, Asia's largest exhibition and conference dedicated to the Medical Device Design and Manufacturing industry, is to be held in Tokyo from 20 th - 22 nd April 2016 Over 500 exhibitors from approximately 25 countries around the world will be exhibiting their latest technologies and services to address the second largest Medical Device market in the world, only after the United States . With the aging population and the government back up, the Medical Device is one of the few markets continuing to grow steadily. Over 30,000 visitors are expected to attend the event from nearly 30 countries, including the United States , Europe , ASEAN countries, China, Korea and many more. MEDTEC Japan is known for its targeted visitors, with over 60% of visitors originating from Medical...

Aluminium Bahrain B.S.C (Alba) is proud to announce that its Chairman of Board of Directors, Shaikh Daij Bin Salman Bin Daij Al Khalifa has been awarded the Lifetime Achievement Award by the Middle East Business Leaders Awards (MEBSLA) 2015. He was honoured with this prestigious award for his exemplary leadership and immense contribution towards business transformation creativity. Shaikh Daij was awarded by H.E. Abdul Rahim Hassan Naqi, Secretary General, Federation of GCC Chambers (FGCCC) during the awarding ceremony, which was held on Monday, November 30, 2015 at Armani Hotel, Burj Khalifa, Dubai, United Arab Emirates (UAE). The MEBSLA Awards is organised by the American Leadership Development Association (ALDA), co-organised by the Leaders International Magazine and endorsed by the...

Kuantan MP Fuziah Salleh wants the Pahang state government to issue a stop-work order for bauxite mining before the monsoon floods hit the state. She claimed four hours of rain in the early hours of Sunday had caused the retention wall of a bauxite cleaning pond in Bukit Goh to burst, and the water to spill into a nearby house. "This was just four hours of rain; try to imagine what will happen if the rain goes on for four days during the monsoon." As such, she wants the Pahang government to issue a stop-work order to the affected mine so that the retention wall can be repaired. The Star earlier reported that "uncontrolled mining" is rampant in the Bukit Goh area, with many Felda settlers chopping down oil palm trees to make way for mining to chase the promise of stellar earnings. Felda...

Brisbane based Metro Mining Limited will make a takeover offer for unlisted Cape York mining company Gulf Alumina Limited. Gulf Alumina holds tenements adjacent to Metro Mining’s Bauxite Hills Project, 95kms north of Weipa. Metro Mining CEO Simon Finnis says his company has already secured 20% of Gulf Alumina by gaining the support of its largest and key founding shareholder. Gulf shareholders who are being offered 3.3 new Metro shares for every Gulf share held. Mr Finnis said the logic behind the takeover was “clear and compelling.” “If the takeover is successful Gulf shareholders will own approximately 44% of a combined group with a Pro-forma market capitalisation of approximately $42 million,” he said. “This would create a leading independent Australian bauxite company, well positioned...

Workers at the Rio Tinto Alcan aluminium smelter in Straumsvík, South-West Iceland, could come out on strike from tomorrow if no solution is found to a row over working conditions. A short and inconclusive round of talks yesterday failed to resolve the dispute between the operators of the plant and its workers, and if there is no breakthrough today, strike action will begin at midnight tonight. Should it come to industrial action, workers will continue to turn up for work for the next two weeks, but only in order to gradually shut down the plant’s 480 electrolysis pots, which are used to smelt the aluminium. The main issue at stake is the demand of Rio Tinto employees for no new contracting powers for operations at the plant to be authorised.

Aluminium prices edged up by 0.36% to INR 97.35 per kg in futures trade today as participants enlarged positions amid a firming trend overseas. Besides, strong demand in spot markets influenced metal prices. At the Multi Commodity Exchange, aluminium for delivery in December inched up 35 paise, or 0.36%, to INR 97.35 per kg in a business turnover of 188 lots. Metal for delivery in January 2016 also rose by a similar margin to trade at INR 98.25 per kg in just one lot. Traders said that apart from increased domestic demand, a firming global trend helped aluminium futures trade higher.

Ford Motor Co. said Tuesday that it will add 2,000 jobs and invest $1.3 billion at the Kentucky Truck Plant to support production of new aluminum-body Super Duty trucks, deepening the automaker's ties to a city where it has two large production facilities. The investment, cheered by plant workers and Kentucky politicians, includes putting more workers on the final assembly line for the all-new 2017 F-Series Super Duty trucks, said Joe Hinrichs, Ford's president of the Americas. The company anticipates strong demand when the new trucks reach dealers' lots late next year, he said. "We definitely want to and expect to make more product in the future here at KTP," he told reporters. The automaker said the investment includes adding a new body shop, upgrading facilities and retooling at the...

Vitex Extrusion officially unveiled a $1.5 million investment in an Presezzi HECS high efficiency air and water cooling system and automated profile stacking system for its Franklin, NH, aluminum extrusion and fabrication facility. The state-of-the-art upgrades strengthen Vitex’s capabilities to produce greater, more consistent throughput and improved mechanical properties. The installation of the new Presezzi HECS System provides Vitex with the most advanced aluminum extrusion quenching capability in the Northeastern U.S region. The system allows immediate quench of an aluminum extrusion profile using a high velocity, multi-sided air and water quench system that puts out over 600 gallons per minute of water at nearly 130 lbs. per square inch. Faster cooling preserves the extrusion...

As the world comes together in Paris to develop a plan of action to tackle the most significant sustainability challenge of the age, the International Aluminium Institute looks forward to a new international agreement on climate change. Delivering improved quality of life for all, equitable access to resources and services, food security, mobility and urban development, in a carbon and labour constrained world requires innovative use of materials, with the potential to deliver more for less. On a full life cycle basis, across its wide range of commonplace applications, aluminium products provide a net benefit to society and to emissions reduction. From transportation, building and construction to food and medical/pharmaceutical packaging, aluminium plays a critical role in both short- and...

As the United Nations adopted an ambitious slate of Sustainable Development Goals (SDG) for 2030, the Aluminum Association played its own small role in this historic effort. Concurrent with the adoption of the SDG was the release of a report showcasing the contributions of business trade associations to advancing the cause of environmental stewardship and sustainability globally. The report - titled “Scaling Up Sustainability Collaboration” - was a joint effort of the United Nations Global Compact and the International Chamber of Commerce and features case studies from about 30 international and domestic industry trade associations in the materials, energy, transportation, financial and other sectors. The case studies emphasize how companies can best collaborate through industry groups to...

The Mount Holly aluminum smelter in Goose Creek may shut down at the end of this year after owner Century Aluminum and electric utility Santee Cooper failed to reach an agreement on a new power contract for the plant. Michael Bless, Century’s president and CEO, said the closure “would be a tragedy” and that he remains hopeful for a last-minute reprieve. The current contract expires Dec. 31. “We want in the worst way to find a way to keep that plant running,” Bless said of the smelter, which employs about 600 workers. The stalemate between Century and Santee Cooper intensified Monday as the utility’s board of directors voted 10-0 to reject the company’s contract proposal. Bless said Monday that Century cannot operate under Santee Cooper’s counter-offer. Century has been buying 75 percent...

The Aluminum Association and the Aluminium Association of Canada released an open letter sent to U.S. Secretary of State John Kerry and Canadian Minister of Environment & Climate Change Catherine McKenna in advance of the 21st Session of the Conference of the Parties (COP21) meeting in Paris this week. In the letter, they expressed their concern about China’s state-planned and carbon intensive aluminum industry which has amassed considerable overproduction. They said it is leading to a distortion of international trade impacting the entire value chain and undermining global efforts to decarbonize the economy. They highlighted the consistent improvement they made in their production processes over the past two decades as measured by primary energy demand and greenhouse gas emissions per...