
The Baltic Dry Index (BDI) extended its winning streak for a seventh consecutive session on Thursday, reaching a one-month high as freight rates surged across Capesize, Panamax and Supramax vessels. The gains bring renewed attention to global dry bulk shipping costs, which influence the transportation of key industrial commodities, such as bauxite and alumina, across international supply chains. The main Baltic index advanced by 61 points, or 2.1 per cent, to 3,020 points, marking its highest reading since October 5. Explore the production, demand and consumption forecasts of bauxite and alumina in our report: "Global Bauxite & Alumina Market Forecast to 2036: Supply–Demand, Trade Flows & Price Outlook" The Capesize index recorded the strongest gains, climbing 136 points, or 2.9 per cent,...
Aluminium alloy powder production for additive manufacturing is set to expand through a new technical cooperation agreement between CNPC Powder China Ltd and Xi’an Bright Laser Technologies Co Ltd (BLT). The agreement covers the production and international distribution of BLT-AlAM400, an aluminium alloy powder developed for applications in humanoid robotics, new energy vehicles (NEVs), aerospace and other industrial sectors. Under the agreement, BLT has authorised Shanghai-based CNPC Powder to manufacture BLT-AlAM400 on a contract basis in China and sell the powder internationally. CNPC Powder has also secured exclusive overseas agency rights, excluding BLT’s direct sales network and existing regional agents. With an annual powder production capacity of almost 10,000 tonnes, CNPC Powder...
Grow with
AL Circle

Germany's largest aerosol can recycler Respray, a division of Remondis, has modernised and expanded its facility at Bramsche. The company claims now to have the capacity to process up to 6500 tonnes of aerosol cans every year. Some 80 000 tonnes of aerosol cans are produced annually in Germany but only 10 per cent of these are professionally recycled, according to Remondis. Around 60 per cent end up at Respray. Remondis has invested ‘heavily’ in the facility where it uses HazPak (short for ‘hazardous packaging’) - a technology supplied by the Canadian manufacturer Eko Environmental. Old aerosol cans can be dangerous as they contain traces of propellant gases such as propane, butane and dimethyl ether. These are highly inflammable and can cause an explosion if they come into contact with...

AMETEK Land has developed a new pyrometer that provides high accuracy and a three-in-one capability specifically for aluminium applications, including extrusion press exit, extrusion press quench zone, and aluminium strip mills. The SPOT AL EQS (SPOT Aluminium Extrusion, Quench and Strip) pyrometer is an extremely flexible instrument with pre-configured algorithms that make it especially suitable for use at the extruder press exit and quench position as well as at mill entry and exit positions in hot rolling mills. In addition, the pyrometer’s algorithms can be customised and tuned for bespoke applications and specific aluminium grades. This latest addition to the LAND range of SPOT pyrometers was specifically designed to work in low emissivity environments where regular pyrometers might...

Aluminium prices are likely to hover between $1,500 and $1,700 per tonne for the later half of this year as oversupply will cap further gains, Akio Hamaji, the new chairman of the Japan Aluminium Association said on Thursday. "With uncertainty over the European economy after Brexit, it is unlikely to see a strong pickup in global economy," Hamaji told a small group of reporters. "So I don't expect sharp gains in the metal prices," he said, adding aluminium supply is expected to exceed demand in the global market this year which will weigh on the market. Benchmark aluminium prices on the London Metal Exchange (LME) have gained 11 percent this year, confounding some analysts who had expected the market to be hit by overproduction and high levels of inventories. The benchmark stood at around...

Altech Chemicals Ltd's managing director, Iggy Tan, said that the company received strong interest in the company's entry into the high purity alumina (HPA) market at a conference in Shenzhen, China. Altech’s plan is to offer a finished product range that will include HPA tailored for the synthetic sapphire and lithium-ion battery separator sheet manufacturing sectors, two rapidly growing segments of the HPA market. The company said that the design of its Malaysian plant incorporates the specialised equipment required for the production of “nano” HPA particles. The size of HPA nano particles is typically less than 1 micron (1/1000 of 1mm) and is the preferred particle size for the fast growing lithium-ion battery separator sheet-manufacturing sector. HPA supply squeeze Tan said that with...

National Aluminium Company (NALCO) was trading higher by 4 per cent to INR 50.10 on the BSE in an otherwise subdued market after the company announced that the government has granted Pottangi Bauxite Mines, in Koraput district of Odisha, where the company's 22,75,000-tonne alumina refinery is located. “As per a recent order issued by Department of Steel & Mines, Govt of Odisha, NALCO has been granted the mining lease of Pottangi with an area covering 1738 hectares for a period of 50 years,” NALCO said in a press release. NALCO’s expansion plans, including the proposed addition of 5th stream in its existing Alumina Refinery at an investment of INR 5,600 crore, greatly depended on this additional source of bauxite, it added. The stock hit an intra-day high of INR 50.80 on the BSE so far. A...

According to a recently published market report, the global building automation and control market, which was $35 billion in 2015, is expected to grow at a CAGR of 9 per cent-10 per cent during 2015-2020. Building automation improves the efficiency of building systems by reducing energy consumption, improving the lifecycle of utilities, and enhancing occupant comfort, and aluminium construction systems comprising aluminium extrusions and panels play a crucial role in improving the acceptability of the building automation process. Aluminium extrusions are used for manufacturing building profile systems as fine, value-added solutions. These products are increasingly used in the form of windows, doors, facades, and sliding doors in modern high-rise buildings, commercial buildings, and star...

The slow death that the US primary aluminium industry has been dying cannot be attributed only to China’s somewhat overambitious aluminium trade policies, said leading consultancy UNO International Trade Strategy. The consulting body warned that the ‘onerous and misplaced barriers will only damage America’s thriving downstream sector.’ The US primary aluminium industry has turned globally uncompetitive. From 23 thriving smelters in the country in 2011, the number now stands at only five. Many of the big names in the upstream aluminium sector have filed for bankruptcy. UNO attributes the outcome to the following causes: Higher cash cost of smelting US is essentially a high-cost country. “The upstream producers are hamstrung by high electricity costs, strict environmental regulations and a...

SHFE 1609 aluminium will move at RMB 12,550-12,750/mt today, with strong wait-and-see sentiment. LME aluminium will hold above the 5-day moving average, with price range at USD 1,665-1,690/mt. In China’s spot aluminium market, spot discounts of RMB 0-10/mt and premiums of RMB 0-30/mt are expected over SHFE 1607 aluminium contract. Key macroeconomic indicators for base metal prices Market will eye US June PPI and last week’s initial jobless claims today, as well as policy decision for the BOE’s July meeting. US import & export price index was mild in June, meaning low possibility of improvement for US inflation in June. Annual rate of US PPI remained low in June. US initial jobless claims remained below 300,000 last week. The US Fed’s Beige Book showed positive outlook for overall US...

Aluminium is currently moving in the range of USD 1,620-1,650 per tonne range. In the first quarter of the current fiscal, aluminium price was average around USD 1,514 per tonne. In the second quarter, it climbed up to USD 1,576 per tonne average during that quarter. Right now in July, last 12 days, average is moving out to USD 1,623 per tonne. So, there is a little forming of the price of London Metal Exchange (LME) during this time. While talking about the current aluminium and alumina price scenario in an recent interview with a leading television channel, TK Chand, CMD of Nalco, said, this price movement is mainly because in second quarter, the consumption of aluminium metal was around 15.39 million tonnes and production was around 14.58 million tonnes, leaving a deficit of 0.8...

The world’s leading truck manufacturer Daimler is planning to use three-dimensional printing (3D) to produce steel or aluminium-made automotive spare parts. This will be done to streamline their supply chain and expedite vehicle manufacturing process leveraging the latest digital technologies. The use of 3D printing technology has been gaining in popularity among auto makers worldwide as the process helps them to pare down logistics and warehouse storage costs substantially. Instead of shipping vehicle spare parts across the globe, they can simply send a digital blueprint of a component to a printing specialist who then creates the parts using lasers to melt powdered form of aluminium, steel, plastics or glass into solidified articles. The digital technology also helps vehicle...

Kemet Corporation New (KEM) hit a new 52-week high yesterday, reaching a peak of $3.18 after opening at $2.98 and closing at $3.17 for a move of 6.02 per cent. Kemet Corp is a manufacturer of capacitors. Its product offerings include tantalum capacitors, multilayer ceramic capacitors, film capacitors, electrolytic capacitors, paper capacitors and solid aluminium capacitors. Hitting a new 52-week high is a notable milestone for any company, and it can mean a trading opportunity on either the long or short side, depending on one's perspective. Some view a company hitting its highest price in a year as a sign of momentum and think it means it's time to buy in. Others, though, tend to interpret a new 52-week high as likely signalling the end of a strong run, with the stock peaking out before...

Japanese steel producer Kobe Steel is all set to start aluminium sheets output for the automotive industry in China in the first quarter of the next financial year, said company spokesperson Tatsuro Kanoh on Monday, June 11. Kobelco Automotive Aluminium Rolled Products, Kobe Steel's wholly owned Chinese subsidiary started production on a trial basis in April 2016. The sample aluminium sheets manufactured by the company are to be sent for testing by global automakers ahead of commercial production. Sample shipments have already begun and are awaiting certification of automakers in Europe, North America, and Japan, Kanoh informed. The aluminium rolling plant in China is located in Tianjin Xiqing Economic Development Area in Tianjin city. It has a production capacity of 100,000 million...

Base metal prices including price of aluminium rose further by up to INR 5 per kg in Indian non-ferrous metal market today, tracking a firming trend overseas amid increased demand from consuming industries. Traders said sentiment remained firm on the back of a firm global trend where copper surged to its highest level since early May, briefly topping USD 5,000 per tonne, on expectations that policy makers are gearing up for economic stimulus that will buoy demand materials. Aluminium sheet cutting, aluminium wire scrap and aluminium utensils scrap finished higher by INR 2 each to INR 150, INR 150 and INR 148 per kg, respectively.

Kjetil Ebbesberg, Hydro, yesterday took on the position of Chairman of European Aluminium until the next General Assembly, replacing Pierre Vareille. “Under Pierre’s chairmanship, European Aluminium demonstrated leadership on climate change, trade and innovation to ensure our industry’s long-term future in Europe,” said Gerd Götz, European Aluminium Director General. “In particular, the Sustainability Roadmap launched in 2015 guides our industry’s endeavour to produce and deliver aluminium in a more sustainable manner. In this respect, integrating the recycling division into European Aluminium was the decisive step that completed the full representation of the whole value chain and strengthened our work on the circular economy.” Mr Vareille, CEO of Constellium since 2012, spent two years...

Odisha’s Department of Steel & Mines has granted the lease of Pottangi Bauxite Mines, in Koraput district of Odisha to Navaratna PSU National Aluminium Company Limited (NALCO), a company press release reported yesterday. The lease, which covers an area of about 4,295 acres has been granted for a period of 50 years. Nalco’s 22,75,000-tonne alumina refinery is located at a very close proximity to the mine and it is s expected to make operations much easier for the profit making PSU. Commenting on the mining lease, NALCO's CMD Tapan Kumar Chand said that now it is the company's turn to live up to the expectations of both Centre and State, as also the people of Odisha, through expansion, investment and CSR initiatives. The Pottangi reserves join the Panchpatmalli Hills reserves as Nalco’s...

The Maharashtra State Electricity Transmission Company Limited (MSETCL) has planned for high ampacity power supply through cables having aluminium composite core around India’s Nashik city connecting seven of its 132 kv power stations to deliver quality power to the citizens. The decision follows major power outages in the city which has already taken off as a major business hub of the country. MSETCL has successfully tested the use of the high ampacity cables for transmission of 1,32,000 volt (132 kv) power lines between Eklahara (Nashik Thermal Power Station) and Ozhar sub-stations. After that, it has been updating its transmission lines using the technology. "The high ampacity cables will be able to withhold exta load and would not lead to such a situation (power failure)," a senior...

Santa Cruz Bicycles just rolled out a new crop of bikes that are a bit more wallet friendly than the top-tier carbon models you’ve already seen. There are new aluminium versions of the Bronson, Tallboy and 5010. There’s now also a complete range of Carbon C models- Bronson, Tallboy, Hightower, Stigmata to name a few. The launch brings the price point on complete carbon bikes down a good bit. As for the clicking and whirring bits, both Santa Cruz and Juliana are offering up new build kit options at both the high end (SRAM Eagle at the XO and XX1 levels) and the low end (SRAM NX). That’s the quick and pithy intro. Santa Cruz is now offering the latest-generation Bronson, Tallboy and 5010 models in aluminium. Frame-only options will sell for $1,899. Complete aluminium models will have...

The Swanhill farm at Jennapullin Road, Shire of Northam has yet another amazing sculpture installed on its premises. The ‘Nellie,’ placed atop the hill at the Swanhill farm, is crafted out of thousands of recycled aluminium horse shoes. Earth Solutions Avon Valley commissioned Otto Hampel to make a swan from recycled aluminium of a magnitude that can be shared by all. He chose to make horse shoes from the re-molten metal to come up with the sculpture. Nellie, which can be seen from as far as 25 kilometres, is believed to be the largest swan sculpture made out of aluminium horse shoes in the world. She will be adding to the stunning backdrop of the Shire of Northam farm, making it a must visit for the global tourists to this part of the wall.