7075 Aluminium Pipe

7075 aluminium pipes are one of the highest-strength, lightweight and corrosion-resistant aluminium alloys that are found in many industries. Because of its high strength-to-weight ratio, 7075 aluminium pipe is most ideal to be utilized in the structural, marine, automotive and aerospace industries. 7075 aluminium's high mechanical properties make it one of the most favored materials to be used in applications that demand toughness, durability and environmental resistance.

7075 Aluminium Pipe:
7075 aluminum pipe is composed of an alloy between aluminium and zinc that is reinforced by copper and magnesium to enhance its hardness and strength. The high-strength material is extremely resistant to fatigue and is frequently used when other grades of aluminium are subjected to extreme conditions. Because of its high level of machinability, good weldability and resistance to stress corrosion cracking, it is frequently used in high-performance applications. 7075 aluminium pipe manufacturers produce this material in various sizes and gauges to meet project requirements.

Advantages:

Exceptional Strength: It is among the highest-strength aluminium alloys and is most appropriate for structural and load-bearing applications.
Lightweight: It is lightweight while having high strength, reducing component and structure weight.
Corrosion Resistance: Offers good corrosion resistance and can be utilized successfully in marine and exterior applications.
Excellent Machinability: Machinable to complex geometries easily while having dimensional stability.
Fatigue Resistance: Fatigue and stress-resistant, ensuring long-term performance under high-stress conditions.
Weldability and Formability: Weldable and formable to any shape without affecting its mechanical properties.

Application:
Aerospace industry 7075 alumiium pipe suppliers provide this material to the aviation industry to be utilized as aircraft fuselage structure, landing gear components and structural supports. Both its lightweight and high-strength properties serve to increase the aircraft's performance and fuel efficiency.

Automotive industry automakers employ this alloy to produce performance-focused components such as chassis reinforcements, roll cages and suspension components. It is the alloy of preference to employ in race and off-road vehicles because of its high-stress and impact load-bearing properties.

Marine applications due to its high corrosion resistance to saltwater environments, 7075 aluminium pipe stockists supply this material to marine equipment, masts and boat frames. It offers longevity and strength under harsh marine conditions.

Defense and military 7075 aluminium is often used in the defense sector to create guns, missile components and components of armored vehicles. 7075 aluminium's high impact strength and lightweight properties are accountable for enhancing mobility and toughness.

From archery bows to bicycle frames, this aluminium alloy is commonly utilized within the sporting industry. It provides the perfect blend of strength and pliability, allowing high-performance sporting equipment to be made.

Specification:

 

 

Standards:	ASTM B345, B241, B429 / ASME SB345, SB241, SB429
Temper:	T6, T651, T6511
Standard:	AMS QQ-A-200/8, AMS QQ-A-200/9, AMS 4160/4161/4172
Size:	8 (1-1/2″ / 1.900″)
Outer Diameter:	1″ through 16″
Length:	Double Random, Single Random, Cut Length
Thickness:	SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
End:	Plain End, Beveled End, Threaded

 

 

Material:

 

 

UNS	EN	DIN, WNr	JIS	AFNOR	ISO	BS	GOST
A97075	ENAW-AlZn5.5MgCu	3.4365	7075	7075 A-Z5GU	AlZn6MgCu	7075 L95 L96	V95
	EN AW-7075	AlZnMgCu1.5

 

 

Chemical Composition:

 

 

Mn	Si	Cr	Cu	Fe	Zn	Al	Mg	Ti	Other
									Each/Total
0.15	0.4-0.8	0.15-0.35	0.15-0.4	0.7	0.25	Remainder	0.8-1.2	0.15	0.005/0.15

 

 

Mechanical Properties:

 

 

Tensile Strength (PSI)	Yield Strength (PSI)	Shear Strength (PSI)	Elongation in 2″	Brinell Hardness
45000	40000	31000	12	95