Price:Available on request
The conductor consists of aluminium wires and zinc-coated steel wires, built up in concentric layers. The center wire or wires are zinc coated and the outer layer or layers are of aluminium. In case required, neutral grease shall be applied between the layers of acsr except the outer layer.
Standard:
IS 398 part 2 and 5, BS 215 part 2, EN 50182, ASTM B232, IEC 61089 and other international specifications. The requirements/specifications given by the purchaser are also taken care of.
Characteristics:
Aluminium strand outer layer/layers are formed with a center core of single/stranded galvanized steel wires.
Can be suitably designed for increased mechanical strength needs by increasing the number of steel wires.
Can be suitably designed for average mechanical needs by using higher aluminium and lower steel contents.
Suited for large spans with metal towers.
High mechanical strength-to-weight ratio.
ACSR yields less sag at a given tension.
Toughness is suited to extreme wind loads.
Corona losses are least due to large diameters.
Application:
ACSR bare conductors are used for overhead high-tension power transmission lines having long spans.
For more detailed information including pricing, customisation and shipping.
Contact SupplierView Profile
