Electrostatic Powder Spraying Machine

The V6 50w electrostatic spraying machine is a manual coating machine that uses imported components and international advanced technology to create a balance between quality and speed. Full screen intelligence, one click operation. Built in imported movement, high voltage module with precise and stable performance, delicate leveling, no exposed grooves, and 360°no dead corners to overcome difficulties.

 

When two operators are needed, V6 dual models can be configured. As a dual gun unit. Both operators have a powder coating gun, control unit, and pump that can use powder from the same container and handcart for easy cleaning and discoloration.

Technical Parameter:

• Input power supply voltage: 110-240VAC/140VA
• Input power: 50W
• Frequency: 50Hz/60Hz
• Short circuit current: 100A
• Maximum input pressure: 10bar/145psi
• Minimum input pressure: 6bar/87psi
• Maximum gas consumption: 0.4mpa/h
• Output voltage: 0~120KV
• Output air pressure: 0-0.5Mpa
• Powder output is up to 600g/min
• Weight 50KG
• Packed wooden box: 95KG
• Size：800*730*1120cm 0.46CBM

Advantage:

• Super strong static electricity and a strong surface adsorption force release 100000 volts of high voltage current. Overcome dead corners, grooves, and other issues with one shot drifting by without the need for respraying.
• Enhanced frame design with movable rollers for easy mobility.
• Advanced Venturi technology ensures uniform spraying and saves a significant amount of powder.
• The ultra-lightweight design improves spraying efficiency and provides a comfortable touch for the spray gun. High safety performance and longer service life.
• Functional advantages
• Accurate adjustment function of current and voltage: supports precise current adjustment to ensure stable spraying effect.
• Digital valve technology: Advanced digital valve technology is adopted to ensure stable flow and pressure during the spraying process.
• PCC precise current control technology: The high-voltage electrostatic sprayer can provide precise current control below 10 μ A to ensure that the powder will not overcharge and improve the spraying quality.