Products List

Automatic water slot router WSF 74

Three cutting units for automatic routing and drilling of water slots and vents into profiles. Complete machining of sash and frame profiles by pneumatic adjustment of the upper and rear cutting unit. Easy adjustment of cutting units. Technical information Three cutting units Spindle speed 17,000 r.p.m. Drill travel 100 mm Router travel 50 mm

Read More >>

Corner crimper EP 120

Crimping of profiles to the highest quality requirements. Easy adjustment and operation. High press capacity reserves by high-volume bellows cylinder. Standard equipped with support arms and press blades. Technical information Pressing height 68 mm Pressing force 4 t (40 kN) Pneumatic drive

Read More >>

Double spindle copy router KF 78

Routing of lock cases and handle holes up to a profile thickness of 70 mm. Routing in two levels (vertically and horizontally) by two completely independent working cutting units. Technical information Routing range horizontally: Routing range with stop300 x 100 mm Routing range with template270 x 70 mm Travel 80 mm Routing range vertically: Routing range with stop290 x 100 mm Routing range with template230 x 70 mm Travel 120 mm Spindle speed 12,000 r.p.m. Profile clamping range150 x 150 mm

Read More >>

End milling machine AF 222

Working table steplessly adjustable in height by hand wheel. "Spindle lock" for quick tool change. Material stop pivotable to the left and right by up to 60°. Notches up to 30° (acute angles left and right). Technical information Cutter diameter 280 mm max. Spindle speed 2,800 r.p.m. Manual feed Cutting height 150 mm Cutting depth 110 mm Cutting length 400 mm Travel 550 mm

Read More >>

Glazing bead saw GLS 192

Manual V-cutting saw with two special saw blades for simultaneous undercutting of the glazing bead profile. Pneumatic special clamping device for glazing beads, standard equipped with two (optionally four) vertical clamps. Two or four glazing beads can be cut simultaneously due to wide working table. Automatic saw feed with foot pedal operation. Technical information Saw blade diameter 200 mm, 98 mm (bevelled 45°) Spindle speed 2,800 r.p.m.

Read More >>

Notching saw AKS 134

Variable notching possibilities for mullion and transom combinations, e.g. for curtain walls, conservatories, sky lights, and special designs. Precise and safe notching due to the fixed workpiece. Indication of cutting depth by digital display Technical information Lower saw unit (vertical): Saw blade diameter 550 mm Tilting range from 45° to the front up to 60° to the rear Cutting depth 210 mm max. Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting range from 55° downwards up to 60° upwards Notching depth 190 mm max. Spindle speed 2,800 r.p.m.

Read More >>

Router and triple spindle drill GF 171

Drilling of handle holes with triple spindle drill head and automatic feed. Routing of lock case notches from above. Routing of lock case notches in a ratio of 1:1 possible. Technical information Routing range horizontally with stop 300 x 120 mm Routing range horizontally with template 285 x 110 mm Clamping range of profiles with drill unit adjustable from 150 x 130 mm to 400 mm Travel 105 mm Spindle speed 12,000 r.p.m. Drill spindle speed 750 r.p.m.

Read More >>

Single spindle copy router AS 70

Accurate routing with little effort. Easy to adjust. Copy routing at a ratio of 1:1. Also available as tabletop unit. Technical information Routing range horizontally with stop 230 x 90 mm Routing range horizontally with template 230 x 90 mm Spindle speed 12,000 r.p.m.

Read More >>

Stop and measuring system MMS 100

Manual adjustment. Adjustment at stop carriage. Manual clamping. Attachable to all elumatec saws. Stop carriage can be raised for profile infeed. Technical information Length variants 1,500 mm, 3,000 mm, 4,500 mm, 6,000 mm.

Read More >>

Template-free copy router SLK 118

Copy router with 3-axis control. The ideal machine for efficient door manufacturing. For manual tool change four tool holders are available. Generously designed axis traverse paths enable the machining of large dimensioned profiles. Technical information Traverse X-axis 2,450 mm,V max. 36 m/min. Traverse Y-axis 350 mm,V max. 15 m/min. Traverse Z-axis 280 mm,V max. 15 m/min. Spindle speed 21,000 r.p.m.

Read More >>

Two-head welding machine ZS 720

Fixed L-head (90°) Variable L-head (30° - 180°) Technical information Welding plate sizes:2 L-plates: Width 340 mm,height 300 mm Profile width at 90° max. 180 mm Profile width at 180° max. 220 mm Profile height max. 210 mm Profile height min. 40 mm Profile length max. 2,520 mm Frame dimension min. 380 mm Angle setting range 30° - 180°

Read More >>

Vee-notch and cut off saw KS 101

Precise vee and split cuts. Simple setting of cutting depth. Pneumatical and continuously adjustable saw blade feed for fast and precise sawing with rapid return. Minimum dimensions (within mm - range) are possible. Technical information Cutting capacity at Vee-cuts: Cutting depth 80 mm Profile height max. 100 mm Saw blade diameter 254 mm or 300 mm Spindle speed 2,800 r.p.m.

Read More >>

Automatic saw SA 73

For high-volume cutting Material infeed (incremental) protects the surface of the workpiece by means of a single-stage lifting system Automatic machine shut-down at the end of the profile section Technical information Saw blade diameter 380 mm Spindle speed 2,800 r.p.m. Feed distance per cycle 5 - 250 mm

Read More >>

Corner cleaning machine EV 832

Outer contours as well as welding beads on the top face and the rear side can be processed simultaneously. Two cutter locations for individually assorted sets of cutters. Grooving knives and cutters can be activated individually, enabling very flexible applications. Working of convex and concave profile surfaces. Technical information Maximum frame dimensiontheoretically unlimited Frame outside dimension min.290 x 290 mm Frame inside dimension min.160 x 160 mm Profile height max. 200 mm Profile height min. 25 mm Cutter diameter max. 260 mm Spindle speed 3,200 r.p.m.

Read More >>

Double mitre saw DG 244

The universal pivoting and tilting of both saw heads allows cutting of high and wide profiles as well as compound mitres. The well-proven elumatec principle of"sawing from below" enables optimum loading and unloading of profiles by freely accessible support table areas. Cutting length variants4,500 mm, 6,000 mm Technical information Minimum cutting length: 375 mm at 90° and 45° Pivoting range inwards: pneumatically 90° - 45 (manually up to 22.5° inwards and up to 140° outwards with digital display) Tilting range inwards: pneumatically 90° - 45 (intermediate angles manually adjustable with digital read–out display and turret stop) Saw blade diameter 550 mm Spindle speed 2,250 r.p.m.

Read More >>

Double mitre saw DG 79

Continuous pivoting range adjustment of the saw heads from 0° to 45° to the left and right. External and internal dimension cuts possible. Vertical and horizontal pneumatic clamping to ensure optimum profile fixation. The solid cast construction with integrated turn table guarantees optimum profile support for cutting to length with angular accuracy. Cutting length variants 3,000 mm, 4,500 mm, 6,000 mm. Cutting length adjustment either manually or automatically by electronic positioning system. Technical information Positive location points at 15.0°, 30.0° and 45.0° Pivoting range from 0° to 45° continuously adjustable Hydro-pneumatic saw feed Saw blade diameter 380 mm Spindle speed 2,800 r.p.m.

Read More >>

End milling machine AF 221

End milling of transom and base notches. "Spindle lock" for quick tool change. Material stop pivotable to the left and right by up to 45°. Technical information Cutter diameter 250 mm max. Spindle speed 2,800 r.p.m. Manual feed Cutting height 115 mm Cutting depth 95 mm Cutting length 250 mm Travel 350 mm

Read More >>

Mitre saw MGS 105

Single mitre saw for special applications. Precise mitre and compound mitre cuts. Free access for optimum loading and unloading of profiles. Technical information Pivoting range manually 22.5°(to the left and right) with digital display Tilting range pneumatically from 90° to 45° Saw blade diameter 420 mm Spindle speed 2,800 r.p.m.

Read More >>

Mitre saw MGS 245

Large dimensions and powerful performance for special applications. The well-proven elumatec principleof "sawing from below" enables an accurate and clean cut. Technical information Pivoting range manually 22.5°(to the left and right) with digital display Tilting range pneumatically from 90° to 45° with digital display Saw blade diameter 550 mm Spindle speed 2,250 r.p.m.

Read More >>

Profile machining centre SBZ 122/33

The profile machining centre 122/33 is designed for the working of profiles on five sides in automatic door manufacturing with single or multiple locking along with other industrial applications. A turning gear integrated in the spindle allows the adjustment of the rotating angle head to 0°, 90°, 180°, and 270°. That way a profile can be worked in the front, from behind, and on the face side with two different tools. For tapping an especially powerful torque in the lower rpm-range is provided for by the "Power Torque Spindle". Technical information Traverse X-axis 3,850 mm,V max. 60 m/min. Traverse Y-axis 350 mm,V max. 30 m/min. Traverse Z-axis 280 mm,V max. 30 m/min. Spindle speed 24,000 r.p.m. Spindle power output max. 7 kW, S 1 Length 5,100 mm Depth 3,400 mm Height 2,560 mm Weight 1,940 kg

Read More >>

Profile machining centre SBZ 150

5-axis profile machining centre Designed for the efficient processing of profiles made from aluminium and steel. All working cycles such as milling, drilling, tapping, thread milling, notching, and sawing are carried out while the profile remains stationary for profile surface protection. 6-sided machining. From below with rotating angle head (optional) Operating software with graphical 3D representation of the workpieces. The magazine can be equipped with eight standard tools and three special tools (saw blade, angle routing head, and special cutters). Sturdy and low-wear direct drives on all axes allow rapid home positioning of the machining assembly. Automatic clamp recognition and positioning. Thanks to the separate working zones processing in shuttle operation is rendered possible. Technical information Traverse X-axis: 6,500 mm,7,800 mm, 9,500 mm, 10,800 mm, 12,500 mm(additional lengths on request),V max. 60 m/min. Traverse Y-axis: 1,000 mm,V max. 36 m/min. Traverse Z-axis: 630 mm,V max. 36 m/min. Pivoting angle A-axis: 0 - 90°freely programmable in 1/10° steps Pivoting angle C-axis: 0 - 345° freely programmable in 1/10° steps Power output at spindle 15 kW / S1 Spindle speed max. 24,000 r.p.m. Spindle torque: Power Torque Cutter diameter 80 mm max. Saw blade diameter 400 mm max. Tool chuck HSK-F63

Read More >>

Profile machining centre SBZ 607

A standardized introduction to automation. 11 predetermined tool units are provided for the key machining operations on windows and doors, such as cutting water slots, lock cases, cut-outs for locking plates and ventilation holes. Creating boreholes for corner hinges, handles, transoms, corner stay arms and dowel holes. Perform sealing groove relief cuts and lock markings. Technical specifications Feed magazine with a capacity of 10 profile bars 11 tool units (with 2 reinforcement screwdriver units) Automatic height and lateral adjustment of the gripper arm Profile length max. 4,000 mm Profile length min. 400 mm Barcode scanner Compact unloading station with pusher Industrial PC with Windows XP

Read More >>

Reinforcement screwdriver system ADS 259

Single profile bar processing Automatic screw feed Technical information Torque max.6 Nm at 2,400 r.p.m. Screw length 13.0 - 45.0 mm Shank diameter 3.0 - 4.5 mm Head diameter 6.0 - 9.0 mm

Read More >>

Single head welding machine ES 710

Suited for welding large-volume profiles (monobloc profiles). Combination welding head for all angles between 30° and 180°. Heated welding bead restriction knives for welding profiles coated with acrylic or foil. Technical information Profile width at 90° max. 180 mm Profile width at 180° max. 220 mm Profile height max. 210 mm Profile height min. 40 mm Angle setting range 30° - 180°

Read More >>

Table saw TS 161

Accurate cutting cycles are achieved by the short upward saw stroke. Wide angle cutting range of up to 0° to the right and up to 45° to the left. Small dimensions with large cutting capacity. The back fence is adjustable to allow optimum use of the saw blade capacity for wide and flat profiles. Technical information Saw blade diameter 280 mm Spindle speed 3,200 r.p.m.

Read More >>

Welding and corner cleaning production line SVL 785

Economically link a horizontal or vertical four-head welding machine with an automatic corner cleaning machine to create a production system. Depending on the customer’s wishes regarding manufacturing flow or production capacity, the “modular system design” makes it possible to use linking options for creating individual production lines. High operating reliability through data transfer between the welding and cleaning machines. Options for operation - manual entry, USB stick, online Technical specifications for welding machines Designated use Min. frame dimension horizontally350 x 350 mm Max. frame dimension,3,140 (4,140) x 2,600 mm Joining process fixed or automatic Welding bead restriction0.2 - 2.0 mm Heated limiting plates PC with touchscreen and visualization Options Inner seal limit Entry door welding Barcode scanner Technical specifications for corner cleaning machines Designated use with options Profile height min. 30 mm Profile height max. 200 mm Profile width min. 28 mm Profile width max. 140 mm Min. frame outer dimension350 x 350 mm Min. frame inner dimension210 x 210 mm 4 - 8 tool positions from top 4 - 8 tool positions from bottom PC with touchscreen and visualization Graphic profile programming on a PC Options Face-plate milling cutter Second drill motor (Corner stay arm drilling unit)

Read More >>